Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

grub2-tools-extra-2.04-2.fc32 RPM for armv7hl

From Fedora Rawhide for armhfp / g

Name: grub2-tools-extra Distribution: Fedora Project
Version: 2.04 Vendor: Fedora Project
Release: 2.fc32 Build date: Wed Sep 18 10:42:54 2019
Group: Unspecified Build host: buildvm-armv7-05.arm.fedoraproject.org
Size: 7388729 Source RPM: grub2-2.04-2.fc32.src.rpm
Packager: Fedora Project
Url: http://www.gnu.org/software/grub/
Summary: Support tools for GRUB.
The GRand Unified Bootloader (GRUB) is a highly configurable and
customizable bootloader with modular architecture.  It supports a rich
variety of kernel formats, file systems, computer architectures and
hardware devices.

This subpackage provides tools for support of all platforms.

Provides

Requires

License

GPLv3+

Changelog

* Wed Sep 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.04-2
  - A couple of RISC-V fixes
  - Remove grub2-tools %posttrans scriptlet that migrates to a BLS config
  - Add blscfg device tree support
    Resolves: rhbz#1751307
* Thu Aug 15 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.04-1
  - Update to 2.04
    Resolves: rhbz#1727279
* Wed Aug 07 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-97
  - Include regexp module in EFI builds
* Thu Aug 01 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-96
  - Manual build for the Fedora 31 mass rebuild to succeed
* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org>
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Thu Jul 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-94
  - 20-grub-install: Restore default SELinux security contexts for BLS files
    Resolves: rhbz#1726020
* Wed Jul 17 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-93
  - Add btrfs snapshot submenu when BLS configuration is used
  - Move grub2-probe to the grub2-tools-minimal subpackage
    Resolves: rhbz#1715994
* Tue Jul 16 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-92
  - Cleanup our patchset to reduce the number of patches
* Sat Jul 13 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-91
  - Includes security modules in Grub2 EFI builds (benjamin.doron)
    Resolves: rhbz#1722938
  - Enable again multiboot and multiboot2 modules on EFI builds
    Resolves: rhbz#1703872
* Fri Jul 05 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-90
  - Fix failure to request grub.cfg over HTTP
  - Some ARM fixes (pbrobinson)
  - Preserve multi-device workflows (Yclept Nemo)
* Thu Jun 27 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-89
  - Fix --bls-directory option comment in grub2-switch-to-blscfg man page
    Resolves: rhbz#1714835
  - 10_linux_bls: use '=' to separate --id argument due a Petitboot bug
  - grub-set-bootflag: Print an error if failing to read from grubenv
    Resolves: rhbz#1702354
  - 10_linux: generate BLS section even if no kernels are found in /boot
  - 10_linux: don't search for OSTree kernels
* Tue Jun 18 2019 Sergio Durigan Junior <sergiodj@redhat.com> - 2.02-88
  - Use '-g' instead of '-g3' when compiling grub2.
    Resolves: rhbz#1708780
* Tue Jun 11 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-87
  - Rebuild for RPM 4.15
* Mon Jun 10 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
  - Rebuild for RPM 4.15
* Mon Jun 10 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
  - Rebuild for RPM 4.15
* Mon May 20 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-84
  - Don't try to switch to a BLS config if GRUB_ENABLE_BLSCFG is already set
* Wed May 15 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-83
  - Fix error messages wrongly being printed when executing blscfg command
    Resolves: rhbz#1699761
  - Remove bogus load_env after blscfg command in 10_linux
* Tue May 07 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-82
  - Make blscfg module compatible at least up to the Fedora 19 GRUB core
    Related: rhbz#1652806
* Fri May 03 2019 Neal Gompa <ngompa13@gmail.com> - 2.02-81
  - Add grub2-mount to grub2-tools-minimal subpackage
    Resolves: rhbz#1471267
* Fri May 03 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-80
  - Add grub2-emu subpackage
* Fri May 03 2019 Tim Landscheidt <tim@tim-landscheidt.de> - 2.02-79
  - Fix description of grub2-pc
    Resolves: rhbz#1484298
* Thu Apr 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-78
  - Add 10_reset_boot_success to Makefile
    Related: rhbz#17010
* Thu Apr 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-77
  - Never remove boot loader configuration for other boot loaders from the ESP.
    This would render machines with sd-boot unbootable (zbyszek)
  - Execute grub2-switch-to-blscfg script in %posttrans instead of %post
  - grub.d: Split out boot success reset from menu auto hide script (lorbus)
  - HTTP boot: strncmp returns 0 on equal (stephen)
  - Some grub2-emu fixes and make it to not print unnecessary messages
  - Don't assume that boot commands will only return on fail
* Thu Mar 28 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-76
  - 10_linux_bls: don't add --users option to generated menu entries
    Resolves: rhbz#1693515
* Tue Mar 26 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-75
  - A set of EFI fixes to support arm64 QCom UEFI firmwares (pbrobinson)
* Fri Mar 22 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-74
  - Fix some BLS snippets not being displayed in the GRUB menu
    Resolves: rhbz#1691232
  - Fix possible undefined behaviour due wrong grub_efi_status_t type (pjones)
* Wed Mar 20 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-73
  - Only set blsdir if /boot/loader/entries is in a btrfs or zfs partition
    Related: rhbz#1688453
* Mon Mar 11 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-72
  - Avoid grub2-efi package to overwrite existing /boot/grub2/grubenv file
    Resolves: rhbz#1687323
  - Switch to BLS in tools package %post scriptlet
    Resolves: rhbz#1652806
* Wed Feb 27 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-71
  - 20-grub-install: Replace, rather than overwrite, the existing kernel (pjones)
    Resolves: rhbz#1642402
  - 99-grub-mkconfig: Don't update grubenv generating entries on ppc64le
    Related: rhbz#1637875
  - blscfg: fallback to default_kernelopts if BLS option field isn't set
    Related: rhbz#1625124
  - grub-switch-to-blscfg: copy increment.mod for legacy BIOS and ppc64
    Resolves: rhbz#1652806
* Fri Feb 15 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-70
  - Check if blsdir exists before attempting to get it's real path
    Resolves: rhbz#1677415
* Wed Feb 13 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-69
  - Don't make grub_strtoull() print an error if no conversion is performed
    Resolves: rhbz#1674512
  - Set blsdir if the BLS directory path isn't one of the looked up by default
    Resolves: rhbz#1657240
* Mon Feb 04 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-68
  - Don't build the grub2-efi-ia32-* packages on i686 (pjones)
  - Add efi-export-env and efi-load-env commands (pjones)
  - Make it possible to subtract conditions from debug= (pjones)
  - Try to set -fPIE and friends on libgnu.a (pjones)
  - Add more options to blscfg command to make it more flexible
  - Add support for prepend early initrds to the BLS entries
  - Fix grub.cfg-XXX look up when booting over TFTP
* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org>
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Mon Dec 17 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-66
  - Don't exclude /etc/grub.d/01_fallback_counting anymore
* Tue Dec 11 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-65
  - BLS files should only be copied by grub-switch-to-blscfg if BLS isn't set
    Related: rhbz#1638117
  - Fix get_entry_number() wrongly dereferencing the tail pointer
    Resolves: rhbz#1654936
  - Make grub2-mkconfig to honour GRUB_CMDLINE_LINUX in /etc/default/grub
    Resolves: rhbz#1637875
* Fri Nov 30 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-64
  - Add comments and revert logic changes in 01_fallback_counting
  - Remove quotes when reading ID value from /etc/os-release
    Related: rhbz#1650706
  - blscfg: expand grub_users before passing to grub_normal_add_menu_entry()
    Resolves: rhbz#1650706
  - Drop buggy downstream patch "efinet: retransmit if our device is busy"
    Resolves: rhbz#1649048
  - Make the menu entry users option argument to be optional
    Related: rhbz#1652434
  - 10_linux_bls: add missing menu entries options
    Resolves: rhbz#1652434
  - Drop "Be more aggro about actually using the *configured* network device."
    Resolves: rhbz#1654388
  - Fix menu entry selection based on title
    Resolves: rhbz#1654936
* Wed Nov 21 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-63
  - add 10_linux_bls grub.d snippet to generate menu entries from BLS files
    Resolves: rhbz#1636013
  - Only set kernelopts in grubenv if it wasn't set before
    Resolves: rhbz#1636466
  - kernel-install: Remove existing initramfs if it's older than the kernel (pjones)
    Resolves: rhbz#1638405
  - Update the saved entry correctly after a kernel install (pjones)
    Resolves: rhbz#1638117
  - blscfg: sort everything with rpm *package* comparison (pjones)
    Related: rhbz#1638103
  - blscfg: Make 10_linux_bls sort the same way as well
    Related: rhbz#1638103
  - don't set saved_entry on grub2-mkconfig
    Resolves: rhbz#1636466
  - Fix menu entry selection based on ID and title (pjones)
    Resolves: rhbz#1640979
  - Don't unconditionally set default entry when installing debug kernels
    Resolves: rhbz#1636346
  - Remove installkernel-bls script
    Related: rhbz#1647721
* Thu Oct 04 2018 Peter Jones <pjones@redhat.com> - 2.02-62
  - Exclude /etc/grub.d/01_fallback_counting until we work through some design
    questions.
    Resolves: rhbz#1614637
* Wed Oct 03 2018 Peter Jones <pjones@redhat.com> - 2.02-61
  - Fix the fallback counting script even harder. Apparently, this wasn't
    tested well enough.
    Resolves: rhbz#1614637
* Tue Oct 02 2018 Peter Jones <pjones@redhat.com> - 2.02-60
  - Fix grub.cfg boot counting snippet generation (lorbus)
    Resolves: rhbz#1614637
  - Fix spurrious allocation error reporting on EFI boot
    Resolves: rhbz#1635319
  - Stop doing TPM on BIOS *again*.  It just doesn't work.
    Related: rhbz#1579835
  - Make blscfg module loadable on older grub2 i386-pc and powerpc-ieee1275
    builds
  - Fix execstack cropping up in grub2-tools
  - Ban stack trampolines with compiler flags.
* Tue Sep 25 2018 Hans de Goede <hdegoede@redhat.com> - 2.02-59
  - Stop using pkexec for grub2-set-bootflag, it does not work under gdm
    instead make it suid root (it was written with this in mind)
* Tue Sep 25 2018 Peter Jones <pjones@redhat.com>
  - Use bounce buffers for addresses above 4GB
  - Allow initramfs, cmdline, and params >4GB, but not kernel
* Wed Sep 12 2018 Peter Jones <pjones@redhat.com> - 2.02-58
  - Add 2 conditions to boot-success timer and service:
    - Don't run it for system users
    Resolves: rhbz#1592201
    - Don't run it when pkexec isn't available
    Resolves: rhbz#1619445
  - Use -Wsign-compare -Wconversion -Wextra in the build.
* Tue Sep 11 2018 Peter Jones <pjones@redhat.com> - 2.02-57
  - Limit grub_malloc() on x86_64 to < 31bit addresses, as some devices seem to
    have a colossally broken storage controller (or UEFI driver) that can't do
    DMA to higher memory addresses, but fails silently.
    Resolves: rhbz#1626844 (possibly really resolving it this time.)
  - Also integrate Hans's attempt to fix the related error from -54, but do it
    the other way around: try the low addresses first and *then* the high one if
    the allocation fails.  This way we'll get low regions by default, and if
    kernel/initramfs don't fit anywhere, it'll try the higher addresses.
    Related: rhbz#1624532
  - Coalesce all the intermediate debugging junk from -54/-55/-56.
* Tue Sep 11 2018 Peter Jones <pjones@redhat.com> - 2.02-56
  - Don't mangle fw_path even harder.
    Resolves: rhbz#1626844
  - Fix reboot being missing on some platforms, and make it alias to
    "reset" as well.
  - More dprintf().
* Mon Sep 10 2018 Peter Jones <pjones@redhat.com> - 2.02-55
  - Fix UEFI memory problem in a different way.
    Related: rhbz#1624532
  - Don't mangle fw_path with a / unless we're on http
    Resolves: rhbz#1626844
* Fri Sep 07 2018 Kevin Fenzi <kevin@scrye.com> - 2.02-54
  - Add patch from https://github.com/rhboot/grub2/pull/30 to fix uefi booting
    Resolves: rhbz#1624532
* Thu Aug 30 2018 Peter Jones <pjones@redhat.com> - 2.02-53
  - Fix AArch64 machines with no RAM latched lower than 1GB 
    Resolves: rhbz#1615969
  - Set http_path and http_url when HTTP booting
  - Hopefully slightly better error reporting in some cases
  - Better allocation of kernel+initramfs on x86_64 and aarch64
    Resolves: rhbz#1572126
* Mon Aug 20 2018 Peter Jones <pjones@redhat.com> - 2.02-52
  - Update conflicts on grubby not to care about %{?dist}
* Sun Aug 19 2018 Peter Jones <pjones@redhat.com> - 2.02-51
  - Make it quieter.
* Thu Aug 16 2018 Peter Jones <pjones@redhat.com> - 2.02-50
  - Fix arm32 off-by-one error on reading the PE header.
* Tue Aug 14 2018 Peter Jones <pjones@redhat.com> - 2.02-50
  - Fix typo in /etc/grub.d/01_fallback_counting
    Resolves: rhbz#1614637
* Fri Aug 10 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-50
  - Add an installkernel script for BLS configurations
* Tue Aug 07 2018 Peter Jones <pjones@redhat.com> - 2.02-49
  - Temporarily make -cdboot perms 0700 again.
* Fri Aug 03 2018 Peter Jones <pjones@redhat.com> - 2.02-48
  - Kill .note.gnu.property with fire.
    Resolves: rhbz#1612339
* Thu Aug 02 2018 Peter Jones <pjones@redhat.com> - 2.02-47
  - Enable armv7 EFI builds.  This was way harder than I expected.
* Tue Jul 17 2018 Peter Jones <pjones@redhat.com> - 2.02-46
  - Fix some minor BLS issues
  - Rework the FDT module linking to make aarch64 build and boot right
* Mon Jul 16 2018 pjones <pjones@redhat.com> - 2.02-45
  - Rework SB patches and 10_linux.in changes even harder.
    Resolves: rhbz#1601578
* Mon Jul 16 2018 Hans de Goede <hdegoede@redhat.com> - 2.02-44
  - Make the user session automatically set the boot_success grubenv flag
  - Make offline-updates increment the boot_indeterminate grubenv variable
* Mon Jul 16 2018 pjones <pjones@redhat.com> - 2.02-43
  - Rework SB patches and 10_linux.in changes
* Fri Jul 13 2018 Peter Jones <pjones@redhat.com> - 2.02-42
  - Revert broken moduledir fix *again*.
* Thu Jul 12 2018 Peter Jones <pjones@redhat.com> - 2.02-41
  - Fix our linuxefi/linux command reunion.
* Wed Jul 11 2018 Peter Jones <pjones@redhat.com> - 2.02-40
  - Port several fixes from the F28 tree and a WIP tree.
* Mon Jul 09 2018 pjones <pjones@redhat.com> - 2.02-39
  - Fix my fix of grub2-switch-to-blscfg (javierm and pjones)
* Mon Jul 02 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-38
  - Use BLS fragment filename as menu entry id and for sort criterion
* Tue Jun 26 2018 Javier Martinez Canillas <javierm@redhat.com>
  - Cleanups and fixes for grub2-switch-to-blscfg (pjones)
  - Use /boot/loader/entries as BLS dir also on EFI (javierm)
* Tue Jun 19 2018 Peter Jones <pjones@redhat.com> - 2.02-37
  - Fix some TPM errors on 32-bit (hdegoede)
  - More fixups to avoid compiler changes (pjones)
  - Put lsmmap into the EFI builds (pjones)
    Related: rhbz#1572126
  - Make 20-grub.install to exit if there is no machine ID set (javierm)
    Resolves: rhbz#1576573
  - More fixes for BLS (javierm)
    Resolves: rhbz#1588184
* Wed May 16 2018 Peter Jones <pjones@redhat.com> - 2.02-37.fc29
  - Fixups to work with gcc 8
  - Experimental https boot support on UEFI
  - XFS fixes for sparse inode support
    Resolves: rhbz#1575797
* Thu May 10 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-36
  - Use version field to sort BLS entries if id field isn't defined
  - Add version field to BLS fragments generated by 20-grub.install
* Tue Apr 24 2018 Peter Jones <pjones@redhat.com> - 2.02-35
  - A couple of fixes needed by Fedora Atomic - javierm
* Mon Apr 23 2018 Peter Jones <pjones@redhat.com> - 2.02-34
  - Put the os-prober dep back in - we need to change test plans and criteria
    before it can go.
    Resolves: rhbz#1569411
* Wed Apr 11 2018 Peter Jones <pjones@redhat.com> - 2.02-33
  - Work around some issues with older automake found in CentOS.
  - Make multiple initramfs images work in BLS.
* Wed Apr 11 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-32
  - Make 20-grub.install to generate debug BLS when MAKEDEBUG is set.
* Fri Apr 06 2018 Peter Jones <pjones@redhat.com> - 2.02-31
  - Pull in some TPM fixes I missed.
* Fri Apr 06 2018 Peter Jones <pjones@redhat.com> - 2.02-30
  - Enable TPM measurements
  - Set the default boot entry to the first entry when we're using BLS.
* Tue Apr 03 2018 Peter Jones <pjones@redhat.com> - 2.02-29
  - Fix for BLS paths on BIOS / non-UEFI (javierm)
* Fri Mar 16 2018 Peter Jones <pjones@redhat.com> - 2.02-28
  - Install kernel-install scripts. (javierm)
  - Add grub2-switch-to-blscfg
* Tue Mar 06 2018 Peter Jones <pjones@redhat.com> - 2.02-27
  - Build the blscfg module in on EFI builds.
* Wed Feb 28 2018 Peter Jones <pjones@redhat.com> - 2.02-26
  - Try to fix things for new compiler madness.
    I really don't know why gcc decided __attribute__((packed)) on a "typedef
    struct" should imply __attribute__((align (1))) and that it should have a
    warning that it does so.  The obvious behavior would be to keep the alignment
    of the first element unless it's used in another object or type that /also/
    hask the packed attribute.  Why should it change the default alignment at
    all?
  - Merge in the BLS patches Javier and I wrote.
  - Attempt to fix pmtimer initialization failures to not be super duper slow.
* Fri Feb 09 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
  - Escape macros in %changelog
* Tue Jan 23 2018 Peter Jones <pjones@redhat.com> - 2.02-24
  - Fix a merge error from 2.02-21 that affected kernel loading on Aarch64.
    Related: rhbz#1519311
    Related: rhbz#1506704
    Related: rhbz#1502312
* Fri Jan 19 2018 Peter Jones <pjones@redhat.com> - 2.02-23
  - Only nerf annobin, not -fstack-crash-protection.
  - Fix a conflict on /boot/efi directory permissions between -cdboot and the
    normal bootloader.
* Thu Jan 18 2018 Peter Jones <pjones@redhat.com> - 2.02-22
  - Nerf some gcc 7.2.1-6 'features' that cause grub to crash on start.
* Thu Jan 18 2018 Peter Jones <pjones@redhat.com> - 2.02-21
  - Fix grub2-efi-modules provides/obsoletes generation
    Resolves: rhbz#1506704
  - *Also* build grub-efi-ia32{,-*,!-modules} packages for i686 builds
    Resolves: rhbz#1502312
  - Make everything under /boot/efi be mode 0700, since that's what FAT will
    show anyway.
* Wed Jan 17 2018 Peter Jones <pjones@redhat.com> - 2.02-20
  - Update to newer upstream for F28
  - Pull in patches for Apollo Lake hardware
    Resolves: rhbz#1519311
* Tue Oct 24 2017 Peter Jones <pjones@redhat.com> - 2.02-19
  - Handle xen module loading (somewhat) better
    Resolves: rhbz#1486002
* Wed Sep 20 2017 Peter Jones <pjones@redhat.com> - 2.02-18
  - Make grub2-efi-aa64 provide grub2
    Resolves: rhbz#1491045

Files

/etc/sysconfig/grub
/usr/bin/grub2-fstest
/usr/bin/grub2-glue-efi
/usr/bin/grub2-kbdcomp
/usr/bin/grub2-mkfont
/usr/bin/grub2-mklayout
/usr/bin/grub2-mknetdir
/usr/bin/grub2-mkrescue
/usr/bin/grub2-mkstandalone
/usr/bin/grub2-syslinux2cfg
/usr/lib/.build-id
/usr/lib/.build-id/07
/usr/lib/.build-id/07/8b62ba7dc27b6258dc973f1ee8d5955636fe8c
/usr/lib/.build-id/1f
/usr/lib/.build-id/1f/d88777c471541cf6bd857840eea5b599284640
/usr/lib/.build-id/35
/usr/lib/.build-id/35/1468c8a2642b0a37e5ede9612d77c78ccaebbf
/usr/lib/.build-id/62
/usr/lib/.build-id/62/935fbd880d35572307af0deeed10a32c480b04
/usr/lib/.build-id/66
/usr/lib/.build-id/66/594fd3c91a493b19b51f1f36f61ee187b07f42
/usr/lib/.build-id/76
/usr/lib/.build-id/76/2fe1d40f8fc7d87023c305f735479da45376b2
/usr/lib/.build-id/8c
/usr/lib/.build-id/8c/ffcdba1385284688027514b3c9065aaf1f1518
/usr/lib/.build-id/91
/usr/lib/.build-id/91/64361f5a0b5a5e43ffb746c3772569294453dd
/usr/lib/.build-id/de/37f0c2fb74f97476d3bd3f6b7c4b86b3ca22a7
/usr/lib/.build-id/e7
/usr/lib/.build-id/e7/d9ca6facc68e9a9a994fcdf0b4549f7f2578fc
/usr/sbin/grub2-ofpathname
/usr/sbin/grub2-sparc64-setup
/usr/share/man/man1/grub2-fstest.1.gz
/usr/share/man/man1/grub2-glue-efi.1.gz
/usr/share/man/man1/grub2-kbdcomp.1.gz
/usr/share/man/man1/grub2-mkfont.1.gz
/usr/share/man/man1/grub2-mklayout.1.gz
/usr/share/man/man1/grub2-mknetdir.1.gz
/usr/share/man/man1/grub2-mkrescue.1.gz
/usr/share/man/man1/grub2-mkstandalone.1.gz
/usr/share/man/man1/grub2-syslinux2cfg.1.gz
/usr/share/man/man8/grub2-install.8.gz
/usr/share/man/man8/grub2-ofpathname.8.gz
/usr/share/man/man8/grub2-sparc64-setup.8.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Oct 15 00:18:10 2019