Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
Name: shairport-sync | Distribution: SUSE Linux Enterprise 15 SP6 |
Version: 4.1.1 | Vendor: openSUSE |
Release: bp156.2.11 | Build date: Mon May 13 19:17:27 2024 |
Group: Productivity/Multimedia/Sound/Utilities | Build host: obs-power8-03 |
Size: 545789 | Source RPM: shairport-sync-4.1.1-bp156.2.11.src.rpm |
Packager: https://bugs.opensuse.org | |
Url: https://github.com/mikebrady/shairport-sync | |
Summary: An AirPlay audio player |
Shairport Sync is an AirPlay audio player – it plays audio streamed from iTunes, iOS, Apple TV and macOS devices and AirPlay sources such as Quicktime Player and ForkedDaapd, among others. Audio played by a Shairport Sync-powered device stays synchronised with the source and hence with similar devices playing the same source. In this way, synchronised multi-room audio is possible for players that support it, such as iTunes. Shairport Sync runs on Linux, FreeBSD and OpenBSD. It does not support AirPlay video or photo streaming.
GPL-3.0-only
* Mon Jan 02 2023 Dirk Müller <dmueller@suse.com> - update to 4.1.1: * This release consists of enhancements and bug fixes to Version 4.1. For information on the new features of 4.1, including AirPlay 2 support, please refer to the 4.1 Release Note. Enhancements * Use the TCP keepalive facility to close a play session if the client connection drops for a minute. Metadata Enhancements * Add FramePosition (phbt), FirstFramePosition (phb0), OutputRate (ofps), OutputFormat (ofmt), StreamType (styp), ServiceName (svna), ClientName (snam) properties to the D-Bus interface and to the metadata stream (codes in brackets). * FramePosition/FirstFramePosition metadata is generated only if the progress_interval in the metadata section of the configuration file is non-zero. The progress interval can also be set by a new SetFramePositionUpdateInterval method in the D-Bus interface. * FramePosition/FirstFramePosition metadata is of the form <RTP Frame number>/<Local Time> where the local time, in nanoseconds (a 64-bit number), is the precise time that frame should be played. The metadata is generated when the frame is placed in the output buffer, and is thus generated audio_backend_buffer_desired_length_in_seconds (usually 0.2 seconds) before the time in question. * Add xesam:albumArtist and xesam:composer metadata (if available) to the metadata bundle presented in the D-Bus interface. * Add a new metadata item: sps:songdatakind, derived from the asdk metadata token, to the metadata bundle presented in the D-Bus interface. If 0 it seems to indicate an item of a specific duration such as an audio track; if 1 it seems to mean the stream is of unknown duration, for example an internet radio stream. Bug Fixes * Fix a bug that prevented multiple classic AirPlay instances being recognised. The bug was that the 12-digit classic AirPlay service name prefixes for each instance were all identically derived from a MAC hardware address. The fix was to modify the generation of prefixes to depend on the service name as well as the hardware address. * Fix a bug that prevented play to the the PulseAudio backend from resuming after a pause. The bug was due to changes in the way pauses were handled and the fix was to reopen the stream if it is closed whenever a play or latency request was made. * Fix a long-standing bug which didn't close the socket used for the RTSP connection, potentially exhausting the sockets available. * Fix a bug in audio_alsa.c when there is no hardware device name. * Add a configuration check for the xxd program when building for AirPlay 2. * Fix a compilation bug on certain platforms by trying to use AC_CHECK_LIB to find libavcodec if the PKG_CHECK_MODULES check fails. * Tue Dec 27 2022 Hillwood Yang <hillwood@opensuse.org> - Update version to 4.1 * AirPlay 2 support * Improved libao backend for better compatibility with HomeBrew installations * Improved MQTT and D-Bus facilities * Metadata improvements * Automatically-generated Docker images * Mon Feb 07 2022 Hillwood Yang <hillwood@opensuse.org> - Update version to 3.3.9 * Fix a build failure with convolution raised since automake 1.16.5 and https://git.savannah.gnu.org/cgit/automake.git/commit/?id=f4a3a70f69e1dbccb6578f39ef47835098a04624 * Fix tinysvcmdns: rr_data_len goes beyond packet buffer * Wed Nov 17 2021 Johannes Segitz <jsegitz@suse.com> - Added hardening to systemd service(s) (bsc#1181400). Added patch(es): * harden_shairport-sync.service.patch * Wed Aug 18 2021 Hillwood Yang <hillwood@opensuse.org> - Update version to 3.3.8 * For the PulseAudio backend pa, added a new server entry to the pa section of the configuration file, allowing you to specify a connection to a remote or a local system PulseAudio instance instead of letting PulseAudio choose. * Enhance features. See details in RELEASENOTES.md * Fix bugs * Wed Aug 19 2020 Callum Farmer <callumjfarmer13@gmail.com> - Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075) * Mon Mar 23 2020 Hillwood Yang <hillwood@opensuse.org> - Update version to 3.3.6 * Resampling has been added for the Jack Audio backend. This can be used to up-sample to 192kHz. * Fix bugs. Please refer to https://github.com/mikebrady/shairport-sync/blob/master/RELEASENOTES.md#version-336 * Sun Jan 19 2020 Hillwood Yang <hillwood@opensuse.org> - Update version to 3.3.5 * Fix a crashing bug if output format S24 was chosen. * Fix a bug whereby if Loudness was enabled through the D-Bus interface, the output would be muted until the volume was changed. * Enhancements to the D-Bus Interface * Fixes a deferred crash that occurred in Ubuntu 14.04 * Fixes a potential crash when an incomplete fmtp parameter set is sent by the requesting client. Thanks to Angus71 for the fault report and for the repair. * Fixed a potential crash * A fix ensures the hardware mixer of an alsa device is detected and initialised before responding to the first volume setting. * Fixes were made to the MPRIS and native D-Bus interfaces. * Fixes an error whereby the 'pvol'volume metadata was no longer sent if Shairport Sync was configured to ignore volume control information coming from the audio source. * Instead of returning EXIT_FAILURE, return EXIT_WITH_SUCCESS on early exit with either "version" (–version or -V) or "help" (–help or -h) arguments. Thanks to Henrik Nilsson for the patch. * Normalises the 'pvol' volume outputs so that when both the software and hardware attenuators are in use to extend the overall attenuation range, the maximum output level corresponds to the maximum output level of the hardware mixer. * Add the option of including the file and line number of each log entry's source. * Rewrite the logic for identifying missing packets of audio and for asking for resends. * Expose the advanced settings controlling the resend request logic. * Exposes two advanced metadata settings related to handling cover art * Tue Oct 22 2019 Tuukka Pasanen <tuukka.pasanen@ilmi.fi> - Update version to 3.3.2 - Bug Fixes * Fix a bug that sometimes caused a crash when a service name was specified in the configuration file. The fix was to be more systematic in allocating and deallocating memory for temporary strings. Thanks to Chris Boot, Ari Sovijarvi, Bernhard Übelacker and Jeroen Massar for the bug report. Fixes Debian Bug report #925577 and supercedes Pull Request #879. * Correct some documentation typos – thanks again to Chris Boot. - Enhancements * Add some settings for controlling the disable_standby_mode. * The first setting is the disable_standby_mode_silence_threshold, which is the amount of audio in the output device's hardware buffer. It should normally be close to the value given in the audio_backend_buffer_desired_length_in_seconds setting. If it drops to this value, silence is added to the buffer to prevent the output device from becoming idle. * The second new setting is the disable_standby_mode_silence_scan_interval which is the time between checks of the output device's hardware buffer. * Mon Jun 24 2019 Hillwood Yang <hillwood@opensuse.org> - Update version to 3.3.1 * Fix a bug in the MQTT documentation and add sanity checking for the port chosen -- thanks to David Crook. * Fix a bug that caused manual format and rate settings to be ignored -- thanks to Jörg Krause. * Add missing support for format settings S24_LE, S24_BE, S32_LE and S32_BE. * Fix a bug that caused dither to be too loud. * Fix error message for invalid * Automatic Format and Speed Selection for alsa devices. Using the alsa back end, when you specify the output device, Shairport Sync will now, by default, select the best output format and speed. For instance, if your output device is capable of 32-bit operation, it will be selected. In some situations, this will give a noticeable improvement in sound quality – see the discussion of audio improvements below. The greatest bit depth will always be selected, and the lowest speed that is a multiple of 44,100. * Audio Transient Reduction: A Disable Standby feature to eliminate certain faint-but-annoying audible pops and clicks has been added for alsa devices. The setting prevents an output device entering standby mode and thus minimises standby/busy transitions, which can sometimes be heard. It is pretty impressive, especially combined with fixes to the dithering code described below. If you can enable 24- or 32-bit audio output to your output device, you can get even better results. This feature is available in the ALSA back end (standard in Linux) when it is driving output devices that can provide precision delay information, i.e. most hardware output devices and possibly some virtual devices. * New active/inactive program hooks. Basically, these are "deglitched" replacements for play start/play end program hooks. When a play session starts, the system goes active. When the play session ends, the system remains active for a period determined by the active_state_timeout setting, 10 seconds by default. If another play session starts before the period elapses, the system stays active; otherwise the system goes inactive. The hooks are performed when the system goes active or inactive. * A new MQTT client interface, with support for metadata and for some remote control commands. * A new Jack Audio back end. * PulseAudio: A new option for the pa backend to allow the specification of the audio sink. * CYGWIN: An updated and enhanced installation procedure to install Shairport Sync as a Cygwin service. * Opt-in default for certain added features: If support for soxr, metadata or the Apple ALAC decoder is included during building (i.e. at the ./configure stage), then the features are enabled by default at run time. The features are (1) soxr interpolation – chosen automatically if the device is fast enough, (2) the Apple ALAC decoder and (3) metadata, which is implied when you include support for metadata, D-Bus, MPRIS or MQTT features. * Shairport Sync can now receive AirPlay streams consisting of raw PCM – 16 bit stereo frames at 44,100 samples per second. Packets must be 352 frames exactly. * Improved support for big-endian CPUs by adding support for explicit -endian formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE. * Add a list of alsa hardware devices found to the alsa backend help section in the shairport-sync -h text. (Linux only – doesn't work on FreeBSD/OpenBSD.) * Replace the existing watchdog, which only offered partial coverage, with a much more robust thread-based watchdog. * Allow a reported remote processing time of zero. * Fix a logical error that could cause an endless loop during a flush. * Ensure a player thread is correctly initialised before allowing it to be cancelled cleanly. * Ensure the player thread always has a cancellation point so that it should always be possible to ask it to terminate. * If a play session is interrupted, wait for it to terminate for up to three seconds. * If a play session is interrupted, ensure the new session uses a different set of UDP ports. This is to ensure that data from the interrupted session – which might be still in transit – doesn't enter the new session. * Make all ALSA command sequences un-cancellable. This is to ensure that ALSA subsystem will not be left in a partially-initialised state if Shairport Sync terminates abruptly. * When a connection is terminated abruptly, ensure that all the UDP ports is use are closed properly. * Impose timeouts on both reading and writing to the supervisory RTSP connection governing a session. * When closing the RTSP connection due to an error, close it immediately, without waiting for a full TCP handshake, because, if the other end has erred, the handshake may never come. * Fix a parameter initialisation error in a situation where there is no hardware mixer. * Fix an MQTT-related crash by ignoring unrecognised commands. * Fix a compilation error and a warning when using the --with-convolution configuration option. * A compilation problem in OpenBSD has been fixed by changing the order of some include files. * Fix a problem when calling the program to be run when the volume control is changed. Thanks to shaven for the report. * Remove unrecognised options from FreeBSD and OpenBSD compilation instructions. * Ensure the compiler flag HAVE_LIBSOXR is defined if the --with-soxr configuration flag is used and pkg-config is in use. * Fix a bug in the dbus native interface which would silently switch soxr interpolation to basic. * Fix a mutex lock bug in the metadata hub. No known effects. * Fix an arithmetic overflow in frame rate calculations that could occur after 2^32 frames – approximately 27 hours at 44,100 frames per second. * A number of memory leaks have been identified and removed. * An incorrect warning about using the deprecated general statistics options has been fixed. * Mon Mar 18 2019 Jan Engelhardt <jengelh@inai.de> - Transform bash-specific sh code to POSIX sh in scriptlets. - Do not hide errors from useradd. - Reduce hard scriptlet dependency on systemd; %service_* does not need it. * Sun Feb 10 2019 Tomáš Chvátal <tchvatal@suse.com> - Really use upstream tarball from the source url * Wed Feb 06 2019 Tuukka Pasanen <tuukka.pasanen@ilmi.fi> - Update to release 3.2.2 Version 3.2 introduces two big new features – MPRIS support and a "native" Shairport Sync D-Bus interface. MPRIS offers a standard set of facilities for implementing remote control and the native D-Bus interface allows local programs to interact directly with Shairport Sync. When used with either of these interfaces, Shairport Sync offers access to the remote control commands available to control the source, and also offers access to metadata, including titles and cover art. These new features are experimental, but are already useful. This release of Shairport Sync contains important bug fixes and stability improvements and is recommended for all users. If offers better synchronisation, better compatibility with third-party AirPlay sources, greater stability when used with YouTube and macOS system sound, faster resynchronisation, better performance on noisy or congested networks and many other improvements. A quick INSTALL guide for the Raspberry Pi, a how-to CAR INSTALL guide and a note about installing to OpenBSD have been added. - See https://github.com/mikebrady/shairport-sync/releases for details * Mon Jul 30 2018 jengelh@inai.de - Avoid repeating name in summary (rpmlint). * Mon Jun 11 2018 hillwood@opensuse.org - Initial package for 3.2rc10. - Add drop-user-config.patch, move configuring user account to rpm spec. - Add firewalld profile. - Add README.SUSE
/etc/shairport-sync.conf /usr/bin/shairport-sync /usr/lib/firewalld /usr/lib/firewalld/services /usr/lib/firewalld/services/airplay-server.xml /usr/lib/systemd/system/shairport-sync.service /usr/sbin/rcshairport-sync /usr/share/doc/packages/shairport-sync /usr/share/doc/packages/shairport-sync/README.SUSE /usr/share/doc/packages/shairport-sync/README.md /usr/share/doc/packages/shairport-sync/RELEASENOTES.md /usr/share/doc/packages/shairport-sync/TROUBLESHOOTING.md /usr/share/licenses/shairport-sync /usr/share/licenses/shairport-sync/LICENSES /usr/share/man/man7/shairport-sync.7.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 19:51:39 2024