wsjtx-2.7.0-1.4 RPM for armv6hl

From OpenSuSE Ports Tumbleweed for armv6hl

WSJT-X implements communication protocols or "modes" called FST4, FST4W, FT4,
FT8, JT4, JT9, JT65, Q65, MSK144, and WSPR, as well as one called Echo for
detecting and measuring your own radio signals reflected from the Moon.
These modes were designed for making reliable, confirmed QSOs under extreme
weak-signal conditions.

Provides

• wsjtx
• application()
• application(message_aggregator.desktop)
• application(wsjtx.desktop)
• wsjtx(armv6hl-32)

Requires

• ld-linux-armhf.so.3
• ld-linux-armhf.so.3(GLIBC_2.4)
• libQt5Core.so.5
• libQt5Core.so.5(Qt_5)
• libQt5Gui.so.5
• libQt5Gui.so.5(Qt_5)
• libQt5Multimedia.so.5
• libQt5Multimedia.so.5(Qt_5)
• libQt5Network.so.5
• libQt5Network.so.5(Qt_5)
• libQt5PrintSupport.so.5
• libQt5PrintSupport.so.5(Qt_5)
• libQt5SerialPort.so.5
• libQt5SerialPort.so.5(Qt_5)
• libQt5Sql.so.5
• libQt5Sql.so.5(Qt_5)
• libQt5Widgets.so.5
• libQt5Widgets.so.5(Qt_5)
• libboost_filesystem.so.1.88.0
• libboost_log.so.1.88.0
• libboost_log_setup.so.1.88.0
• libboost_thread.so.1.88.0
• libc.so.6
• libc.so.6(GLIBC_2.15)
• libc.so.6(GLIBC_2.32)
• libc.so.6(GLIBC_2.34)
• libc.so.6(GLIBC_2.38)
• libc.so.6(GLIBC_2.4)
• libc.so.6(GLIBC_2.7)
• libfftw3f.so.3
• libfftw3f_threads.so.3
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.0)
• libgcc_s.so.1(GCC_3.5)
• libgcc_s.so.1(GCC_4.0.0)
• libgfortran.so.5
• libgfortran.so.5(GFORTRAN_10)
• libgfortran.so.5(GFORTRAN_8)
• libgomp.so.1
• libgomp.so.1(GOMP_1.0)
• libgomp.so.1(GOMP_4.0)
• libgomp.so.1(OMP_1.0)
• libhamlib.so.4
• libm.so.6
• libm.so.6(GLIBC_2.27)
• libm.so.6(GLIBC_2.29)
• libm.so.6(GLIBC_2.38)
• libm.so.6(GLIBC_2.4)
• libreadline.so.8
• libstdc++.so.6
• libstdc++.so.6(CXXABI_1.3)
• libstdc++.so.6(CXXABI_1.3.11)
• libstdc++.so.6(CXXABI_1.3.13)
• libstdc++.so.6(CXXABI_1.3.15)
• libstdc++.so.6(CXXABI_1.3.2)
• libstdc++.so.6(CXXABI_1.3.3)
• libstdc++.so.6(CXXABI_1.3.8)
• libstdc++.so.6(CXXABI_ARM_1.3.3)
• libstdc++.so.6(GLIBCXX_3.4)
• libstdc++.so.6(GLIBCXX_3.4.11)
• libstdc++.so.6(GLIBCXX_3.4.14)
• libstdc++.so.6(GLIBCXX_3.4.15)
• libstdc++.so.6(GLIBCXX_3.4.19)
• libstdc++.so.6(GLIBCXX_3.4.21)
• libstdc++.so.6(GLIBCXX_3.4.22)
• libstdc++.so.6(GLIBCXX_3.4.29)
• libstdc++.so.6(GLIBCXX_3.4.30)
• libstdc++.so.6(GLIBCXX_3.4.32)
• libstdc++.so.6(GLIBCXX_3.4.9)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-3.0-or-later

Changelog

* Tue Feb 18 2025 Andreas Stieger <andreas.stieger@gmx.de>
  - Update to version 2.7.0:
    * new Special Operating Activities "Q65 Pileup" and "SuperFox"
    * new "Message System" feature
* Fri Feb 14 2025 Andreas Stieger <andreas.stieger@gmx.de>
  - reproducible builds: drop debian changelog (reproducible.patch)
* Thu Feb 13 2025 Andreas Stieger <andreas.stieger@gmx.de>
  - refresh spec file for inclusion in Tumbleweed
  - restore previous spec file license
  - drop wsjtx-no-rigctlcom.patch, hamlib now includes rigctl
* Thu Jun 20 2024 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - New spec file with current URL and source locations
  - Fixed build for for Leap 15.6, Factory and Tumbleweed
* Wed May 03 2023 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Added a rpmlint file as a workaround for build failing due to
    executable stack (for Factory/Tumbleweed the badness is 10000)
* Tue Jan 31 2023 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Updated to version 2.6.1. This is mostly a bug fix release for
    Q65.
    * Fix a flaw in Q65 mode that prevented proper display of the
      T/R period spinner.
    * Correct the reference to "ARRL International Digital Contest"
      in the Release Notes.
    * Make the initialization of the decoded text font more robust.
    * Better initialization when starting the program in FT8 Hound
      mode.
  - Patch wsjtx-no-rigctlcom.patch rebased
  - Updated to version 2.6.0, its major enhancements include the
    following:
    * Mode selection buttons on main window for FT4, FT8, JT65,
      MSK144, Q65, and FT8's Hound mode
    * Support for the ARRL International Digital Contest
    * Performance enhancements for the FT8 and Q65 modes
    * New features for EME Echo mode, including calibrated SNR reports
    * Several new convenience features for Fox operators
    * Save/Restore capability, "Preferred" status, and effective date
      ranges for mode-dependent tables of default frequencies
    * Improved display features for contest log
    * Improved calibration of SNR estimates for modes FST4 and FST4W
  - For detailed changes for 2.6.0-rc1 to rc5 see NEWS file
* Wed Jan 12 2022 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Updated to version 2.5.4
    * This is a bug fix  release. It has the following changes since
      release 2.5.3:
      + WSJTX: Repair a defect that caused occasional crashes when in
      QSO with stations using nonstandard callsigns.
      + MAP65: Allow MAP65 "Best-fit Delta phi" solution to be
      displayed to the user.
  - Updated to version 2.5.3 (not released for Linux)
    * This release has the following changes since release 2.5.2:
      + Add a note in memory of G4WJS to the About window
      + Add a simple $DXCALL macro capability for Tx messages, and
      update the User Guide accordingly
      + Ensure that MAIN VFO is used for receiving on rigs that
      require it
      + Repair a defect in reporting low-confidence decodes to
      PskReporter
      + Updated CTY.DAT database, tnx to Jim AD1C
* Sun Nov 21 2021 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Updated to version 2.5.2
    * This is mostly a bug fix  release.  It has the following changes
      since release 2.5.1:
      + Repair a longstanding regression that caused signal reports from
      tail-ended Tx2 messages to be omitted from logged information
      + Parse "dx-call-1 RR73; dx-call-2 <de-call> +nn" messages (i3=0,
      n3=1 DXpedition mode) in regular 77-bit modes
      + Repair a regression associated with setting the main window width
      on program startup.
      + Repair a problem with Q65 decodes of type 'q3' for messages of the
      form "<Call_1> Call_2"
      + Execute code associated with Q65 decodes of type 'q5' only when the
      Max Drift control is set to 50. This fix prevents
      double-incrementing of the message averaging counter on the first
      decoding sequence.
      + Polarization offset 'Dpol' from the astronomical data window is now
      written to file azel.dat if environment variable
      WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is
      especially useful for EME on the higher microwave bands.
      + The Auto Log QSO option in "Settings->Reporting" now behaves the
      same as the Prompt to log QSO option when not in a special
      operating context mode.
      + The Fast/Normal/Deep setting in Q65 mode is now a sticky setting
      and is no longer reset to Fast on program startup or when Settings
      has been opened. The user selection is used for automatic decodes,
      but Deep is used for any subsequent manual decode attempts.
      + New hamlib code to correct minor flaws in controlling several rigs.
      + Update the  Chinese and Hong Kong translations of the user
      interface.
* Fri Oct 22 2021 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Updated to version 2.5.1
    * This release mainly contains improvements and defect repairs related
      to Q65 and JT65 modes when used with non-standard and compound
      calls. Also included is a new feature for microwave aircraft scatter
      and repairs for defects detected since the 2.5.0 GA release.
      + Improved Q65 support for 10GHz Aircraft Scatter contributed
      by Rex, VK7MO, and Roger, W3SZ.
      + Repair a defect that failed to pre-load the DE and DX
      calls to the hash lookup tables in the Q65 decoder.
      + Repair standard message Tx4 and Tx5 generation in Q65
      mode when using a non-standard call.
      + Repair a defect in generation of the standard Tx2 JT65
      message in EME mode when using a compound call.
      + Repair a defect when decoding 77-bit type 4 non-standard
      call message.
      + Repair a defect that could cause a crash when switching from
      Q65 to JT65 mode and attempting a double-click decode.
      + Enable 'q3' AP decoding in Q65 mode for messages containing a
      non-standard call.
      + Repair a defect that required a blank DX Grid to achieve Q65
      'q3' decodes of messages containing a non-standard call.
      + Repair the logic that sets parameters for Q65 "Deep" decoding.
      + In Q65 mode, allow 'q2' decodes when MyCall is compound or
      non-standard.
      + Repair a long-standing defect that could cause a crash when
      reference spectrum correction is enabled.
      + Updated UI translations from Xavi, EA3W, Oba-san, JA7UDE, and
      a new translation for Traditional Chinese by Steven, BU2EL.
      + Updated CTY.DAT database, tnx to Jim AD1C
      + Improved main window layout to ensure TxN messages are fully
      visible.
* Sat Oct 02 2021 Wojciech Kazubski <wk@ire.pw.edu.pl>
  - Updated to version 2.5.0
    * WSJT-X in  this release is nearly identical to that in WSJT-X 2.4.0.
      The Q65 decoder has been enhanced to measure and compensate for linear
      frequency drift in Q65 signals.
      + Repair a defect that caused CAT errors when using WSPR band hopping
      and auto tune-up with some Icom rigs.
      + Ensure that CALL3.TXT is not deleted while updating the file (this
      allows sharing using symlinks to work).
  - Release: WSJT-X 2.5.0-rc6
      + Repair a file handle leak in wsprd (tnx Phil, KA9Q).
      + Better handling of the Tx1 buttons when changing special operating
      modes.
      + Q65 mode now supports contest special operating modes.
      + Repair an issue when non-ASCII characters used in account names.
      + Repair a regression that prevented WSPR band-hopping working when
      the Tx percentage is zero.
  - Release: WSJT-X 2.5.0-rc5
      + Repair a regression that caused some messages involving compound
      or nonstandard callsigns to be encoded as free text
  - Release: WSJT-X 2.5.0-rc4
      + Repair a defect in CALL3.TXT lookups that incorrectly matched
      partial calls
      + Instructions in macOS ReadMe.txt to suppress App Nap energy saving
      + Revised User Guide using FT8 mode for the basic tutorial
      + Allow contest and FD operating in Q65 mode
  - Release: WSJT-X 2.5.0-rc3
      + Repair a long standing defect that caused UDP Protocol Heartbeat
      messages to not be sent when no other intervening messages are
      sent.
  - Release: WSJT-X 2.5.0-rc2
      + Increase maximum DT to 5.5 s when EME decoding is enabled in Q65
      + Fix generation of Tx5 message when "hiscall" has suffix /P or /R.
      + Improve width management of GUI's band-selection combo box
      + Restore plotting of Q65 sync curve after a q3 decode
      + Disable selection of "View | Message Averaging F7" for modes
      other than JT4 and JT65
      + Switching to Q65 mode now defaults to "Decode | Fast"
      + Repair a long standing regression with message generation for
      72-bit modes when using a compound callsign.
      + Repair a defect in diagnostic logging that could cause crashes on
      some platforms.
      + Repair a defect which failed to strip leading and trailing spaces
      on input of callsigns during validation.
      + Hamlib updates including repair of defects with PTT handling on a
      separate serial port via rigctld, delayed PTT with Elecraft K3
      series rigs, and support for the Icom IC-575 rig.
      + Updated CTY.DAT database
  - Release: WSJT-X 2.5.0-rc1
      + FST4W mode no longer saves .WAV files when "Menu->Save->None" is
      checked.
  - patch hamlib_ver.diff removed, now WSJT-X will accept any version
    of hamlib, including 4.3.1

Files

/usr/bin/cablog
/usr/bin/echosim
/usr/bin/fcal
/usr/bin/fmeasure
/usr/bin/fmtave
/usr/bin/fst4sim
/usr/bin/ft8code
/usr/bin/hash22calc
/usr/bin/jt4code
/usr/bin/jt65code
/usr/bin/jt9
/usr/bin/jt9code
/usr/bin/message_aggregator
/usr/bin/msk144code
/usr/bin/q65code
/usr/bin/q65sim
/usr/bin/rigctl-wsjtx
/usr/bin/rigctlcom-wsjtx
/usr/bin/rigctld-wsjtx
/usr/bin/udp_daemon
/usr/bin/wsjtx
/usr/bin/wsjtx_app_version
/usr/bin/wsprd
/usr/share/applications/message_aggregator.desktop
/usr/share/applications/wsjtx.desktop
/usr/share/doc/packages/wsjtx
/usr/share/doc/packages/wsjtx/AUTHORS
/usr/share/doc/packages/wsjtx/BUGS
/usr/share/doc/packages/wsjtx/NEWS
/usr/share/doc/packages/wsjtx/README
/usr/share/doc/packages/wsjtx/THANKS
/usr/share/doc/packages/wsjtx/example_log_configurations
/usr/share/doc/packages/wsjtx/example_log_configurations/README
/usr/share/doc/packages/wsjtx/example_log_configurations/wsjtx_log_config.ini.console
/usr/share/doc/packages/wsjtx/example_log_configurations/wsjtx_log_config.ini.debugger
/usr/share/doc/packages/wsjtx/example_log_configurations/wsjtx_log_config.ini.rig_control
/usr/share/doc/packages/wsjtx/example_log_configurations/wsjtx_log_config.ini.simple_verbose
/usr/share/licenses/wsjtx
/usr/share/licenses/wsjtx/COPYING
/usr/share/man/man1/fcal.1.gz
/usr/share/man/man1/fmeasure.1.gz
/usr/share/man/man1/fmtave.1.gz
/usr/share/man/man1/fst4sim.1.gz
/usr/share/man/man1/ft8code.1.gz
/usr/share/man/man1/jt4code.1.gz
/usr/share/man/man1/jt65code.1.gz
/usr/share/man/man1/jt9.1.gz
/usr/share/man/man1/jt9code.1.gz
/usr/share/man/man1/message_aggregator.1.gz
/usr/share/man/man1/msk144code.1.gz
/usr/share/man/man1/qra64code.1.gz
/usr/share/man/man1/qra64sim.1.gz
/usr/share/man/man1/rigctl-wsjtx.1.gz
/usr/share/man/man1/rigctlcom-wsjtx.1.gz
/usr/share/man/man1/rigctld-wsjtx.1.gz
/usr/share/man/man1/udp_daemon.1.gz
/usr/share/man/man1/wsjtx.1.gz
/usr/share/man/man1/wsprd.1.gz
/usr/share/pixmaps/wsjtx_icon.png
/usr/share/wsjtx
/usr/share/wsjtx/JPLEPH
/usr/share/wsjtx/cty.dat
/usr/share/wsjtx/cty.dat_copyright.txt
/usr/share/wsjtx/eclipse.txt

Generated by rpm2html 1.8.1

Fabrice Bellet, Thu Sep 25 23:24:22 2025