i2pd-2.56.0-1.2 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

The Invisible Internet Protocol (I2P) is a universal anonymous network layer. All
communications over I2P are anonymous and end-to-end encrypted, participants
don't reveal their real IP addresses.

This package contains a C++ implementation of an I2P router.

Provides

• i2pd
• config(i2pd)
• group(i2pd)
• i2pd(armv7hl-32)
• user(i2pd)

Requires

• /bin/sh
• /bin/sh
• /bin/sh
• /bin/sh
• config(i2pd) = 2.56.0-1.2
• group(i2pd)
• ld-linux-armhf.so.3
• ld-linux-armhf.so.3(GLIBC_2.4)
• libboost_program_options.so.1.88.0
• libc.so.6
• libc.so.6(GLIBC_2.16)
• libc.so.6(GLIBC_2.17)
• libc.so.6(GLIBC_2.28)
• libc.so.6(GLIBC_2.32)
• libc.so.6(GLIBC_2.33)
• libc.so.6(GLIBC_2.34)
• libc.so.6(GLIBC_2.38)
• libc.so.6(GLIBC_2.4)
• libc.so.6(GLIBC_2.7)
• libc.so.6(GLIBC_2.8)
• libc.so.6(GLIBC_2.9)
• libcrypto.so.3
• libcrypto.so.3(OPENSSL_3.0.0)
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.0)
• libgcc_s.so.1(GCC_3.3.1)
• libgcc_s.so.1(GCC_3.5)
• libm.so.6
• libm.so.6(GLIBC_2.4)
• libminiupnpc.so.17
• libssl.so.3
• libssl.so.3(OPENSSL_3.0.0)
• libstdc++.so.6
• libstdc++.so.6(CXXABI_1.3)
• libstdc++.so.6(CXXABI_1.3.11)
• libstdc++.so.6(CXXABI_1.3.13)
• libstdc++.so.6(CXXABI_1.3.15)
• libstdc++.so.6(CXXABI_1.3.2)
• libstdc++.so.6(CXXABI_1.3.3)
• libstdc++.so.6(CXXABI_1.3.5)
• libstdc++.so.6(CXXABI_1.3.8)
• libstdc++.so.6(CXXABI_1.3.9)
• libstdc++.so.6(GLIBCXX_3.4)
• libstdc++.so.6(GLIBCXX_3.4.11)
• libstdc++.so.6(GLIBCXX_3.4.14)
• libstdc++.so.6(GLIBCXX_3.4.15)
• libstdc++.so.6(GLIBCXX_3.4.18)
• libstdc++.so.6(GLIBCXX_3.4.19)
• libstdc++.so.6(GLIBCXX_3.4.20)
• libstdc++.so.6(GLIBCXX_3.4.21)
• libstdc++.so.6(GLIBCXX_3.4.22)
• libstdc++.so.6(GLIBCXX_3.4.26)
• libstdc++.so.6(GLIBCXX_3.4.29)
• libstdc++.so.6(GLIBCXX_3.4.30)
• libstdc++.so.6(GLIBCXX_3.4.31)
• libstdc++.so.6(GLIBCXX_3.4.32)
• libstdc++.so.6(GLIBCXX_3.4.9)
• libz.so.1
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1
• shadow
• systemd
• systemd
• systemd
• systemd
• user(i2pd)

License

BSD-3-Clause

Changelog

* Sun Apr 27 2025 Felix Felix <felix@dumbeck.net>
  - update to 2.56.0:
    * Config params for shared local destination
    * Exclude disk operations from SSU2 and NTCP2 threads
    * Set minimal version for peer test to 0.9.62
    * Fixed termination deadlock if SAM session is active
    * AddressBook full addresses cache
    * Shorter ECIESx25519 ack request interval for datagram and I2CP sessions
    * Updated reseeds list
    * Recreate tunnels in random order
    * Send Ack requested flag after second SSU2 resend attempt
    * Don't change datagram routing path too often if unidirectional data stream
    * Fixed race condition at tunnel endpoint
    * Decline transit tunnel to duplicated router
  - format .spec
* Mon Feb 10 2025 Matthias Eliasson <elimat@opensuse.org>
  - update to 2.55.0:
    * Support boost 1.87
    * New RTO and window size calculation and resetting algorithm for streams
    * Faster LeaseSet amd RouterInfo lookups
    * Direct link between tunnel and transport to next peer
    * Separate thread for tunnel build requests
    * Fixed missing RouterInfo buffer in NetDb
    * Throttle incoming ECIESx25519 sessions
    * Check LeaseSet expiration time
    * Resend HolePunch and RelayResponse messages
    * Publish 'R' cap for yggdrasil-only routers, and 'U' cap for routers through proxy
    * New "i2p.streaming.maxConcurrentStreams" tunnel's param to limit number of simultaneous streams
    * Don't delete routers from NetDb when offline
    * Save unreachable router's endpoint to use it next time without introducers
    * Random tunnel rejection when medium congestion
    * Increased hole punch expiration interval
    * Handle NTCP2 session handshakes in separate thread
    - moved binary from /usr/sbin to /usr/bin
* Wed May 22 2024 Andreas Stieger <andreas.stieger@gmx.de>
  - update to 2.52.0:
    * Moved netdb's disk file operations to separate threads
    * Fast exploratory lookup handling at floodfills
    * Drop unsolicited database search replies
    * Pick only confirmed routers for tunnels and exploratory replies if tunnel build rate is low
    * More reliable long live streams
    * Throttle database search requests
    * Handle database search replies faster
    * Don't accept too old routers and address with malformed keys
    * Fixed different crashes on high load and shutdown
  - fix up Factory submission and cmake macros
* Mon May 06 2024 sage <lamiaceae@airmail.cc>
  - update to 2.51.0:
    * Encrypted tunnel tests
    * New streaming RTT/RTO/Window calculation algorithms
    * Publish medium congestion indication
    * Changed upstream SOCKS proxy from SOCKS4 to SOCKS5
    * New implementation of SSU2 retransmission, send buffer, window, congestion control, timeouts
    * Transit tunnels limit more than 64K. Default value to 10K
    * Fixed lookup of encrypted LeaseSet
    * Report error if client is trying to connect to itself in SAM
    * Fixed crash when packet comes to terminated stream
    * Tunnel status "declined" in web console
    * SAM error reply "Incompatible crypto" if remote destination has incompatible crypto
    * Fixed outbound tunnel build failure if it's endpoint is the same as reply tunnel gateway
    * Reduce unreachable router ban interval to 8 minutes
    * Send lookup reply directly to reply tunnel gateway if possible
    * Fixed I2PControl RouterManager returns invalid JSON when unknown params are passed
    * Correct implementation of "reservedrange" config param
    * Less false positive cases for tunnel tests
    * Check ipv4/ipv6 compatibility for peer tests
    * Allow SSU2 even if port binding fails
    * Support local domain sockets for SOCKS proxy upstream
  - update to 2.50.2:
    * Fixed crash with OpenSSL 3.2.0
    * Fixed false positive clock skew detection
  - update to 2.50.1:
    * Fixed support for new EdDSA usage behavior in OpenSSL 3.2.0
  - update to 2.50.0:
    * Support of concurrent ACCEPTs on SAM 3.1
    * Low bandwidth and far routers can expire before 1 hour
    * Don't pick too active peer for first hop
    * Try peer test again if status is Unknown
    * Send peer tests with random delay
    * Updated reseeds list
    * Fixed XSS vulnerability in addresshelper
    * Fixed publishing NAT64 ipv6 addresses
    * Fixed deadlock in AsyncSend callback
* Wed Feb 07 2024 Dominique Leuenberger <dimstar@opensuse.org>
  - Provide user/group symbol for user created during pre.
* Wed Sep 27 2023 ming li <mli@suse.com>
  - update to 2.49.0:
    * Handle SOCK5 authorization with empty user/password and send correct version in response
    * Improve NTCP2 transport session logging
    * Allow 0 hops in explicitPeers
    * Don't allow incoming transport sessions from routers with incorrect timestamp
    * Fixed sending keepalive for sessions with introducers
    * Always select router with ipv4 for tunnel endpoint
    * Fixed crash if deleted BOB destination was shared between few BOB sessions
    * Memory pool for router profiles
    * Removed AVX code
    * Exclude SSU1 introducers from SSU2 addresses
    * Don't create paired inbound tunnel if length is different
    * Fixed padding length for SSU2 path response
    * Don't publish introducers with zero tag
    * Consider all addresses non-published for U and H routers even if they have host/port
    * Don't pick completely unreachable routers for tunnels
    * Separate network and testing status
* Mon Jun 12 2023 R4SAS <r4sas@i2pd.xyz>
  - update to 2.48.0:
    * Added 'critical' log level
    * Allow user/password authentication method for SOCK5 proxy
    * Fixed reload tunnels
    * Don't recognize new router as floodfill until it proves it's real
    * Fixed incomplete HTTP headers in I2P tunnels
    * Publish congestion cap 'G' if transit is not accepted
    * Added webconsole button to drop a remote LeaseSet manually
    * Publish encrypted RouterInfo through tunnels
    * Print local b32 address on webconsole destination page
    * Fixed incorrect address caps for unspecified ipv6 address
  - update to 2.47.0:
    * DHT for floodfills instead plain list
    * Process router's messages in separate thread
    * Don't publish non-reachable router
    * Fixed memory leak in Windows network state detection
    * Fixed reseed attempts from invalid address
    * Add support for domain addresses for Yggdrasil reseeds
    * Send and check target destination in first streaming SYN packet
    * Added congestion caps (https://geti2p.net/spec/proposals/162-congestion-caps)
    * Added SAM UDP port parameter
  - update to 2.46.1:
    * Fixed race condition while getting router's peer profile
    * Fixed creation of new router.info
    * Fixed displaying LeaseSets in the webconsole
    * Fixed crash when processing ACK request
  - update to 2.46.0:
    * New algorithm for tunnel creation success rate calculation
    * Localization to Swedish, Portuguese, Turkish, Polish
    * Fixed deadlock during processing I2NP block with Garlic in ECIES encrypted message to router
    * Periodically send Datetime block in NTCP2 and SSU2 and check
    * Better profiling for unreachable routers
    * Minimal version for floodfill is 0.9.51
    * Drop incoming NTCP2 and SSU2 connection if published IP doesn't match actual endpoint
    * Sort transports by endpoints in webconsole
    * Don't publish "0.0.0.0" in RouterInfo
    * Check referer when processing Addresshelper
    * Select first hop from high bandwidth peers for client tunnels
    * Exclude unreachable router from NetDB for 2 hours
    * Fixed missing NTCP2 address in RouterInfo if enabled back
    * Fixed race condition with encrypted LeaseSets
  - update to 2.45.1:
    * Fixed UPnP crash if SSU2 or NTCP2 is disabled
    * Fixed crash on termination for some platforms
    * Network status is always OK if peer test msg 5 received
    * Added "Full Cone NAT" status error
    * Drop duplicated I2NP messages in SSU2
    * Set rejection code 30 if tunnel with id already exists
  - update to 2.45.0:
    * Removed SSU transport
    * Fixed file descriptors leak
    * 1 and 15 seconds bandwidth calculation for i2pcontrol
    * Compressible padding for I2P addresses
    * Don't accept incoming session from invalid/reserved addresses for NTCP2 and SSU2
    * Drop RouterInfos and LeaseSets with timestamp from future
    * Increased default max transit tunnels number from 2500 to 5000 or 10000 for floodfill
    * Fixed ::1 address in RouterInfo
    * SSU2 network error handling (especially for Windows)
    * Localization to Czech
    * NTCP2 and SSU2 timestamps are rounded to seconds
    * Don't send SSU2 termination again if termination received block received
    * Fixed random crash on AddressBook update
    * Test for Symmetric NAT with peer test msgs 6 and 7
    * Fixed spamming to log if no descriptors
    * Don't select overloaded peer for next tunnel
    * Limit simultaneous tunnel build requests by 4 per pool
    * Fixed RTT self-reduction for long-live streams
    * Fixed crash if incorrect LeaseSet size
    * "No Descriptors" router error state
    * Remove "X-Requested-With" in HTTP Proxy for non-AJAX requests
    * Fixed SSU2 network error handling (especially for Windows)
* Tue Dec 06 2022 Dirk Müller <dmueller@suse.com>
  - update to 2.44.0:
    * SSL connection for server I2P tunnels
    * Localization to Italian and Spanish
    * SSU2 through SOCKS5 UDP proxy
    * Reload tunnels through web console
    * SSU2 send immediate ack request flag
    * SSU2 send and verify path challenge
    * Configurable ssu2.mtu4 and ssu2.mtu6
    * SSU2 is enbaled and SSU is disabled by default
    * Separate network status and error
    * Random selection between NTCP2 and SSU2 priority
    * Added notbob.i2p to jump services
    * Remove DoNotTrack flag from HTTP Request header
    * Skip addresshelper page if destination was not changed
    * SSU2 allow different ports from RelayReponse and HolePunch
    * SSU2 resend PeerTest msg 1 and msg 2
    * SSU2 Send Retry instead SessionCreated if clock skew detected
    * Long HTTP headers for HTTP proxy and HTTP server tunnel
    * SSU2 resends and resend limits
    * Crash at startup if addressbook is disabled
    * NTCP2 ipv6 connection through SOCKS5 proxy
    * SSU2 SessionRequest with zero token
    * SSU2 MTU less than 1280
    * SSU2 port=1
    * Incorrect addresses from network interfaces
    * Definitions for Darwin PPC; do not use pthread_setname_np
    * Complete SSU2 implementation
    * Localization to Chinese
    * Send RouterInfo update for long live sessions
    * Explicit ipv6 ranges of known tunnel brokers for MTU detection
    * Always send "Connection: close" and strip out Keep-Alive for server HTTP
      tunnel
    * Show ports for all transports in web console
    * Translation of webconsole site title
    * Support for Windows ProgramData path when running as service
    * Ability to turn off address book
    * Handle signals TSTP and CONT to stop and resume network
    * ### Changed
    * Case insensitive headers for server HTTP tunnel
    * Do not show 'Address registration' line if LeaseSet is encrypted
    * SSU2 transports have higher priority than SSU
    * Disable ElGamal precalculated table if no SSU
    * Deprecate limits.ntcpsoft, limits.ntcphard and limits.ntcpthreads config
      options
    * SSU2 is enabled and SSU is disabled by default for new installations
    * Typo with Referer header name in HTTP proxy
    * Can't handle garlic message from an exploratory tunnel
    * Incorrect encryption key for exploratory lookup reply
    * Bound checks issues in LeaseSets code
    * MTU detection on Windows
    * Crash on stop of active server tunnel
    * Send datagram to wrong destination in SAM
    * Incorrect static key in RouterInfo if the keys were regenerated
    * Duplicated sessions in BOB
* Thu Jun 09 2022 R4SAS <r4sas@i2pd.xyz>
  - Update to version 2.42.1
    * Fixed incorrect jump link in HTTP Proxy
  - Update to version 2.42.0
    * Preliminary SSU2 implementation
    * Tunnel length variance
    * Localization to French
    * Fixed encrypted LeaseSet for EdDSA signature
    * UDP tunnels reload
    * Fixed incorrect processing of i2cp.dontPublishLeaseSet param
    * Updated reseeds list
    * Win32 service
    * Daily cleanup of obsolete peer profiles
    * Fixed race conditions for short tunnel build message and RouterInfo
      buffer allocation
    * Don't show version in title of web console
    * Fixed tunnel build if clock was out of sync
  - Update to version 2.41.0
    * Clock syncronization through SSU
    * Added localization to German
    * Select compatible outbound tunnel for I2CP messages
    * Use TCP/IP sockets for I2CP on Android instead local sockets
    * Restart webconsole's acceptor in case of exception
    * Try another floodfill for publishing if no compatible tunnels found
    * Reduce memory usage for RouterInfo structures
    * Avoid duplicated addresses in RouterInfo. Check presence of netId and version
    * Update reseed servers list/cerificates
    * Changed webconsole's dark style colors
    * Fixed attempt to use Yggdrasil on start on Android
    * Fixed severe packets drop in SSU
    * Fixed crash on tunnel tests
    * Fixed loading addressbook subscriptions from config
  - Update to version 2.40.0
    * "Keep alive" parameter for client tunnels
    * Fixed tunnels reload (kill -s HUP)
    * Support openssl 3.0.0
    * Build tunnels through ECIES routers only
    * Reduced memory usage
    * Localization to Armenian
    * Added Windows menu item for opening datadir
    * Reseed if too few floodfills
    * Don't publish old and replacing tunnel in LeaseSet
    * Webconsole light/dark theme depending on system settings (via CSS)
    * Updated reseed servers list
    * Fixed build for Build on GNU/Hurd
    * Set gzip compression to false by default
    * i18n code called from ClientContext (libi2pd_client)
  - Update to version 2.39.0
    * Short tunnel build messages
    * Localization to Russian, Ukrainian, Turkmen, Uzbek and Afrikaans
    * Custom CSS styles for webconsole
    * Avoid slow tunnels with more than 250 ms per hop
    * Process DELAY_REQUESTED streaming option
    * "certsdir" options for certificates location
    * Yggdrasil reseed for v0.4, added two more
    * Rekey of all routers to ECIES
    * Encryption type 0,4 by default for server tunnels
    * Fixed zero-hop tunnels
    * Set minimal version for floodfill to 0.9.38
    * Fixed crash upon SAM session termination
    * NTP sync through ipv6
    * Allow ipv6 addresses for UDP server tunnels
    * Consistent path for explicit peers
    * Always create new tunnel from exploratory pool
    * Better distribution for random tunnel's peer selection
* Wed May 19 2021 Ferdinand Thiessen <rpm@fthiessen.de>
  - Update to version 2.38.0
    * ipv6 introducers and peer test
    * Support .b32.i2p addresses and hostnames for SAM STREAM CREATE
    * Blinding of EdDSA signing keys
    * Publish iexp param for introducers
    * Send updated LeaseSet for incoming ECIES-x25519 session
    * Bind ipv6 or yggdrasil NTCP2 acceptor to specified address
    * Don't publish LeaseSet without inbound tunnels
    * Rekey of all routers but floodfills to ECIES
    * Recognize ipv4 and ipv6 SSU addresses without host
    * Show ipv6 network status and router version on the webconsole

Files

/etc/apparmor.d
/etc/apparmor.d/usr.bin.i2pd
/etc/i2pd
/etc/i2pd/i2pd.conf
/etc/i2pd/tunnels.conf
/etc/i2pd/tunnels.conf.d
/etc/i2pd/tunnels.conf.d/README
/etc/logrotate.d/i2pd
/usr/bin/i2pd
/usr/lib/systemd/system/i2pd.service
/usr/lib/tmpfiles.d/i2pd.conf
/usr/share/doc/packages/i2pd
/usr/share/doc/packages/i2pd/ChangeLog
/usr/share/doc/packages/i2pd/README.md
/usr/share/i2pd
/usr/share/i2pd/certificates
/usr/share/i2pd/certificates/family
/usr/share/i2pd/certificates/family/gostcoin.crt
/usr/share/i2pd/certificates/family/i2p-dev.crt
/usr/share/i2pd/certificates/family/i2pd-dev.crt
/usr/share/i2pd/certificates/family/mca2-i2p.crt
/usr/share/i2pd/certificates/family/stormycloud.crt
/usr/share/i2pd/certificates/family/volatile.crt
/usr/share/i2pd/certificates/reseed
/usr/share/i2pd/certificates/reseed/acetone_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/admin_at_stormycloud.org.crt
/usr/share/i2pd/certificates/reseed/arnavbhatt288_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/creativecowpat_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/echelon3_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/hankhill19580_at_gmail.com.crt
/usr/share/i2pd/certificates/reseed/hottuna_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/i2p-reseed_at_mk16.de.crt
/usr/share/i2pd/certificates/reseed/igor_at_novg.net.crt
/usr/share/i2pd/certificates/reseed/lazygravy_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/orignal_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/r4sas-reseed_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/rambler_at_mail.i2p.crt
/usr/share/i2pd/certificates/reseed/reseed_at_diva.exchange.crt
/usr/share/licenses/i2pd
/usr/share/licenses/i2pd/LICENSE
/usr/share/man/man1/i2pd.1.gz
/var/lib/i2pd
/var/lib/i2pd/certificates
/var/lib/i2pd/i2pd.conf
/var/lib/i2pd/tunnels.conf
/var/lib/i2pd/tunnels.d

Generated by rpm2html 1.8.1

Fabrice Bellet, Fri Oct 17 22:54:09 2025