| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: argyllcms | Distribution: openSUSE Tumbleweed |
| Version: 3.4.1 | Vendor: openSUSE |
| Release: 1.1 | Build date: Wed Sep 17 20:58:06 2025 |
| Group: System/X11/Utilities | Build host: reproducible |
| Size: 122458289 | Source RPM: argyllcms-3.4.1-1.1.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: https://www.argyllcms.com/ | |
| Summary: ICC compatible color management system | |
The Argyll color management system supports accurate ICC profile creation for scanners, CMYK printers, film recorders and calibration and profiling of displays. Spectral sample data is supported, allowing a selection of illuminants observer types, and paper fluorescent whitener additive compensation. Profiles can also incorporate source specific gamut mappings for perceptual and saturation intents. Gamut mapping and profile linking uses the CIECAM02 appearance model, a unique gamut mapping algorithm, and a wide selection of rendering intents. It also includes code for the fastest portable 8 bit raster color conversion engine available anywhere, as well as support for fast, fully accurate 16 bit conversion. Device color gamuts can also be viewed and compared using a VRML viewer.
AGPL-3.0-only AND GPL-2.0-or-later AND MIT
* Wed Sep 17 2025 Antonio Teixeira <antonio.teixeira@suse.com>
- Update to 3.4.1:
* Enabled support for JETI specbos extra adapter heads.
* Turned off erroneous strip read debugging in munki driver.
* Fixed printtarg -T option to work again.
* Add delay to ArgyllCMS_install_USB.exe and ArgyllCMS_uninstall_USB.exe exit
so that messages can be read.
* Changed chartread unexpected patch value warning threshold to dE 95 when no
targen -c profile.
* Tue Aug 12 2025 Antonio Teixeira <antonio.teixeira@suse.com>
- Update to 3.4.0:
* Added support for Spyder and SpyderPRO (2024)
* Renamed proposed CIE 2012 2 and 10 degree to standard CIE 2015 2 and 10
degree observers, as per CIE 170-2:2015.
* Added -Y c: option to colprof and invprofcheck to allow setting/overriding
alibration curves for setting final ink limits.
* Added -Y c: option to xicclu to allow setting/overriding calibration curves
for setting final ink limits, and added -T flag to show ink limits.
* Fixed Spyder X and X2 to not make Device Disconect noise (if such sounds are
enabled) on MSWin.
* Fixed bug in colprof -nI failing for CMYK profiles.
* Enhanced strip reader patch recognition to reject strips that don't start
and end on the media, as well as adding some speed compensation to the patch
recognition for non-zerbra ruler measurements.
* Fixed bug in i1Pro3 strip reading where it would return bad values if the
zerbra stripe wasn't used.
* Changed chartread so that it will issue warnings of possible bad row or patch
reading even when .ti2 reference measurement is not accurate (i.e. no
preconditioning profile used in targen.)
* Increased emphasis of making sure that there is contrast between patches at the
end of rows in printtarg patch ordering for strip instruments.
* Added -C parameter to targen to allow overriding any calibration curves found
in the ICC profile, used to estimage the total ink limit from that in the ICC
profile. Also better enforces final raw computes ink limits.
* Modified ccxxmake so that it checks that it has actually found a white seeming
patch to use as the L*a*b* white reference, and the patch to de-weight. If
there is no white patch (i.e. just RGB patches) then it will use D65 as the
L*a*b* conversion reference. ccxxmake will fail if there are less than 3 patches.
* Fixed ICC profile writing so that it clips rather than failing when writing a
ColorantTable PCS value that is out of range. A warning to stderr will be issued.
* Changed ColorMunki driver so that it is more forgiving about unexpected version
string lengths.
* Fixed dispcal and dispread so that they won't error out if there is no instrument
but the -M parameter is provided.
* Fri Sep 27 2024 Antonio Teixeira <antonio.teixeira@suse.com>
- Update to 3.3.0:
* Improved reliability of i1Pro2 startup by adding recovery delay after the
getmisc instruction.
* Fixed i1pro2/3 driver to be more forgiving of wavelength calibration pushing
filter offsets outside the range of raw CCD range.
* Fixed numerical bug in targen when using -V and -c with profile with zero
black.
* Added support for Spyder X2 (thanks to Chris Minasians and A.K. for helping
make an instrument available).
* Added support for JETI 2501 spectrometer thanks to to Omardis.
* Added -T option to targen to allow separate total ink limit for text and spacer
text.
* Modified targen CMYK chart generation to apply a level of luminance boost to
the resulting OFPS samples. This partially compensates for the overall
darkening of the test set due to exploring the combined K response of the
device. While this will reduce the sampling density and resulting profile
accuracy in darker parts of the gamut, it should improve the accuracy of colors
for realistic prints, which typically have a lighter average than the device
CMYK gamut.
* Added extra diagnostics and -p plot detail to printcal. Added -z flag to allow
setting a resulting calibration table resolution to values other than 256.
* Fix 3.2.0 bug introduced into spectro/Jamfile install that omitted spec2cie
from binary distributions.
* Tue May 14 2024 Antonio Teixeira <antonio.teixeira@suse.com>
- Update to 3.2.0:
* Added extra diagnostics to printcal.
* Added colprof -nI option, that adds inverse gamut mapping to Perceptual and
Saturation A2B tables, if they are being created. This is not recommended for
source profiles, since it handicaps true gamut mapping, but may be a workaround
to faulty Adobe Lightroom BPC for Perceptual intent in output profiles.
* Added error message for ColorMunki spectro sensor internal cable being
disconnected.
* Fixed bug in Appearance B2A conversion that appeared in V3.0 release.
* Fixed crash in chartread strip reading when given faulty .ti2 file.
* Tweaked i1d3 AIO adaptive integration time to reduce measure time to be more
comparable to just using Rev A commands.
* Re-worked ARGYLL_NOT_INTERACTIVE stdin to work much better on MSWin when
connected to a pipe. Removed code that empties stdin before expecting use input
when ARGYLL_NOT_INTERACTIVE.
* Fixed OS X dispwin -c etc.
* Fixed colprof IGNORE_DISP_ZEROS heuristic so that it doesn't reject OLED red
measurements that have a Z value of 0.0.
* Added -H option to colprof to allow setting the charTargetTag to given string,
rather than automatically filling with .ti3 data.
* Changed instrument monitoring thread debug messages to only be shown on -D9, so
they don't interfere with messages shown at -D8.
* Tue Mar 12 2024 Antonio Teixeira <antonio.teixeira@suse.com>
- Fix build with gcc14 (bsc#1221304)
* Add ajam-gcc14.patch
- Reformat ajam-include.patch with a/b prefixes
- Use %autosetup
* Tue Feb 20 2024 Dominique Leuenberger <dimstar@opensuse.org>
- Use %patch -P N instead of deprecated %patchN.
* Mon Dec 04 2023 Antonio Teixeira <antonio.teixeira@suse.com>
- update to 3.1.0:
* Fixed bug in CMYK profile B2A table creation that sometimes resulted in
bumpy black generation. (Only occurred when compiled using recent gcc with
code optimization.)
* Changed ICC profile serialization of pure ASCII text tags emit a warning
rather than error if they are fed non-ASCII utf8 input.
* Made ICC code a little more robust against bad profiles. (Thanks to David Hoyt).
* Fixed latent bug in X11 plot code that caused window not to be created or
updated when dowait == 0. This shows up on Linux as failure of spotread -S
to show spectral plot.
* Fixed problem with colorhug not noticing errors from the instrument.
* Updated scanin/it8Wolf.cht to improve accuracy of grey wedge patch recognition.
* Merged some Debian patches, including spelling fixes.
* Thu Nov 09 2023 Dirk Müller <dmueller@suse.com>
- update to 3.0.2:
* Fix #include <ctype.h> in spectro/conv.c
* Fix typo introduced into spectro/i1d3.c that prevents
retail i1d3 from working.
* Fixed accuracy problem with xicclu -fb when using cLut type
profiles that use a matrix in their B2A table.
* Fixed crash in xicclu with device link profiles.
* Fixed error when creating profiles with
ARGYLL_CREATE_DISPLAY_PROFILE_WITH_CHAD or
ARGYLL_CREATE_OUTPUT_PROFILE_WITH_CHAD.
* Make re-writing an ICC profile more forgiving of
tags that are incorrect for the profile version.
* Fixed problem with writing textDescriptionType
ScriptCode that was not being padded to 67 characters.
* Fixed bug in CGATS output. This showed up in oeminst.
* Fri Sep 22 2023 Antonio Teixeira <antonio.teixeira@suse.com>
- Update to 3.0.0:
* Updated ccast/axTLS to get ChromCast working again with latest Google CC
operating software.
* Extensive re-write/re-factor of icclib to make it more future-proof.
See https://www.argyllcms.com/doc/ChangesSummary.html for details.
* Added ref/ColorCheckerPassport.ti2 and ref/ColorCheckerHalfPassport.ti2
to allow measuring ColorCheckerPassport with instrument.
* Fixed bug in Munki spectro hi-res mode with some instruments. Luminance
matching between normal and hi-res was sometimes quite poor.
* Added ARGYLL_CREATE_DISPLAY_PROFILE_WITHOUT_CHAD environment variable.
* Changed colprof -U flag to -u. Changed dispcal -J flag to -K to accommodate
a potential new flag for colprof and dispcal.
* Added workaround for bug in madHcNet64.dll32/64.dll which sometimes causes
failure.
* Added delay after USB set_config on OS X to help Spyder 3/4 on Ventura OS.
* Added -Y parameter to dispwin to override automatic patch delay.
* Changed i1d3 driver to cope with Rev. B "0x83" error robustly. This should
fix any issues measuring low level Red only patch values on OLED displays,
but with slower measurements when this occurs.
* Added spotread -Y S option to save spectral sensitivity curves and added
corresponding support in i1d3 driver. This allows for comparison of different
instruments factory calibrations.
* Added a -h scale parameter to dispread, to allow the automatic instrument
calibration test patch values to be scaled down from their default 100%
value. This is useful with HDR displays.
* Added manifest to MSWindows executables to use UTF-8 code pages on Windows
1903 and later. This should improve non-ASCII filename and path handling.
* Added a Violet colorant to the targen colorant list.
* Fixed problem with OS X 64 bit backwards compatibility where it failed to
locate serial instruments when the binaries are run on OS X V12 or latter
machines.
* Fixed bug in i1Pro3 driver where it was not returning the correct
measurement conditions enum.
* Fixed spotread so that ambient measure for monochrome sources doesn't error
out due to bad CCT/VCT/VDT. Also change -T so that it suppresses CCT etc. if
ambient mode is used.
* Added hacky workaround to strange Mac M2/rosetta bug in del_i1proimp().
- Make the argyllcms-doc package noarch.
* Wed Dec 07 2022 Dominique Leuenberger <dimstar@opensuse.org>
- Do not set everything inside doc/ mode 644; otherwise the
directories are set 644 as well, which means no files inside are
accessible. This resulted in the past in doc/ actually not being
added to the devel package.
* Wed Aug 17 2022 Dirk Müller <dmueller@suse.com>
- update to 2.3.1:
* Added value sanity check & warning to chartread patch by patch mode.
* Fixed crash on 64 bit MSWin in spectro/aglob due to changing SDK
declarations for _findfirst().
* Fixed one remaining problem with not coping with "Colour" spelling rather
than "Color" in cxf2ti3.
* Add code in cgats write to check for float format problems when faced with
- inf or +inf value.
* Fix i1Pro3 highres in ccxxmake, dispcal & dispread.
* Changed OS X usb reset to re-enumerate instead, as reset does nothing on OS
X >= 10.8.
* Added spectro/instlib.api.txt file to public distribution.
* Fixed possible crashes in xicc/ccss.c and spectro/oeminst.c
* Wed Jan 26 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to version 2.3.0:
* Fixed spotread -YL (i1Pro1/2 lamp remediation) to function even
if calibration is impossible due to the white reference being out of tolerance.
* Fix SpyderX faulty initial black calibration
* Added icomuf_reset_before_close flag for SpyderX, as some versions
of the instrument have been reported to lock up after use.
* Modified the ArgyllCMS CIECAM02 implementation to include a blue
hue linearization tweak, to improve the "blue goes purple" effect
when gamut mapping or clipping highly saturated blues to smaller gamuts.
* Added spotread -Y y option that forces the listing of instrument
specific display calibrations in the usage, even for serial instruments.
* Removed native i1d3 C6 instrument support as a favor to X-Rite.
* Improved cxf2ti3 so that it should cope with XML that uses "Colour"
spelling rather than "Color".
* Added I1D3_ESCAPE environment variable to allow a user to potentialy
use any current or future OEM coded i1d3 instrument.
/usr/bin/applycal /usr/bin/average /usr/bin/cb2ti3 /usr/bin/cctiff /usr/bin/ccxxmake /usr/bin/chartread /usr/bin/collink /usr/bin/colprof /usr/bin/colverify /usr/bin/com.argyllcms.metainfo.xml /usr/bin/cxf2ti3 /usr/bin/dispcal /usr/bin/dispread /usr/bin/dispwin /usr/bin/extracticc /usr/bin/extractttag /usr/bin/fakeCMY /usr/bin/fakeread /usr/bin/greytiff /usr/bin/iccdump /usr/bin/iccgamut /usr/bin/icclu /usr/bin/iccvcgt /usr/bin/illumread /usr/bin/invprofcheck /usr/bin/kodak2ti3 /usr/bin/ls2ti3 /usr/bin/mppcheck /usr/bin/mpplu /usr/bin/mppprof /usr/bin/oeminst /usr/bin/printcal /usr/bin/printtarg /usr/bin/profcheck /usr/bin/refine /usr/bin/revfix /usr/bin/scanin /usr/bin/spec2cie /usr/bin/specplot /usr/bin/splitti3 /usr/bin/spotread /usr/bin/synthcal /usr/bin/synthread /usr/bin/targen /usr/bin/tiffgamut /usr/bin/timage /usr/bin/txt2ti3 /usr/bin/viewgam /usr/bin/xicclu /usr/lib/udev/rules.d/55-Argyll.rules /usr/share/color /usr/share/color/argyll /usr/share/color/argyll/ref /usr/share/color/argyll/ref/3dap5k.sp /usr/share/color/argyll/ref/ACES_P3.icm /usr/share/color/argyll/ref/CIE_C.sp /usr/share/color/argyll/ref/CMP_DT_003.cht /usr/share/color/argyll/ref/CMP_DT_mini.cht /usr/share/color/argyll/ref/CMP_Digital_Target-2019.cht /usr/share/color/argyll/ref/CMP_Digital_Target-4.cht /usr/share/color/argyll/ref/CMP_Digital_Target-4.cie /usr/share/color/argyll/ref/CMP_Digital_Target-4.ti2 /usr/share/color/argyll/ref/CMP_Digital_Target-7.cht /usr/share/color/argyll/ref/CMP_Digital_Target_Studio.cht /usr/share/color/argyll/ref/CRT.ccss /usr/share/color/argyll/ref/ClayRGB1998.icm /usr/share/color/argyll/ref/ColorChecker.cht /usr/share/color/argyll/ref/ColorChecker.cie /usr/share/color/argyll/ref/ColorChecker.ti2 /usr/share/color/argyll/ref/ColorCheckerDC.cht /usr/share/color/argyll/ref/ColorCheckerDC.ti2 /usr/share/color/argyll/ref/ColorCheckerHalfPassport.cht /usr/share/color/argyll/ref/ColorCheckerHalfPassport.cie /usr/share/color/argyll/ref/ColorCheckerHalfPassport.ti2 /usr/share/color/argyll/ref/ColorCheckerPassport.cht /usr/share/color/argyll/ref/ColorCheckerPassport.cie /usr/share/color/argyll/ref/ColorCheckerPassport.ti2 /usr/share/color/argyll/ref/ColorCheckerSG.cht /usr/share/color/argyll/ref/ColorCheckerSG.ti2 /usr/share/color/argyll/ref/D50_0.0.sp /usr/share/color/argyll/ref/D50_0.1.sp /usr/share/color/argyll/ref/D50_0.3.sp /usr/share/color/argyll/ref/D50_0.5.sp /usr/share/color/argyll/ref/D50_0.7.sp /usr/share/color/argyll/ref/D50_1.0.sp /usr/share/color/argyll/ref/D50_1.2.sp /usr/share/color/argyll/ref/D50_1.5.sp /usr/share/color/argyll/ref/D50_1.7.sp /usr/share/color/argyll/ref/D50_2.0.sp /usr/share/color/argyll/ref/D50_2.5.sp /usr/share/color/argyll/ref/D50_3.0.sp /usr/share/color/argyll/ref/DisplayP3.icm /usr/share/color/argyll/ref/EBU3213_PAL.icm /usr/share/color/argyll/ref/ECI2002.ti2 /usr/share/color/argyll/ref/ECI2002R.ti2 /usr/share/color/argyll/ref/F1.sp /usr/share/color/argyll/ref/F5.sp /usr/share/color/argyll/ref/F8.sp /usr/share/color/argyll/ref/FograStrip2.ti1 /usr/share/color/argyll/ref/FograStrip2_2.ti2 /usr/share/color/argyll/ref/FograStrip3.ti1 /usr/share/color/argyll/ref/FograStrip3_3.ti2 /usr/share/color/argyll/ref/GTIPlus.sp /usr/share/color/argyll/ref/Hutchcolor.cht /usr/share/color/argyll/ref/ISO12641_2_1.cht /usr/share/color/argyll/ref/ISO12641_2_3_1.cht /usr/share/color/argyll/ref/ISO12641_2_3_2.cht /usr/share/color/argyll/ref/ISO12641_2_3_3.cht /usr/share/color/argyll/ref/LaserSoftDCPro.cht /usr/share/color/argyll/ref/License.txt /usr/share/color/argyll/ref/Office.sp /usr/share/color/argyll/ref/ProPhoto.icm /usr/share/color/argyll/ref/ProPhotoLin.icm /usr/share/color/argyll/ref/QPcard_201.cht /usr/share/color/argyll/ref/QPcard_201.cie /usr/share/color/argyll/ref/QPcard_202.cht /usr/share/color/argyll/ref/QPcard_202.cie /usr/share/color/argyll/ref/ReadMe.txt /usr/share/color/argyll/ref/Rec2020.icm /usr/share/color/argyll/ref/Rec709.icm /usr/share/color/argyll/ref/RefMediumGamut.gam /usr/share/color/argyll/ref/SMPTE431_P3.icm /usr/share/color/argyll/ref/SMPTE_RP145_NTSC.icm /usr/share/color/argyll/ref/SOtele.sp /usr/share/color/argyll/ref/SpyderChecker.cht /usr/share/color/argyll/ref/SpyderChecker.cie /usr/share/color/argyll/ref/SpyderChecker24.cht /usr/share/color/argyll/ref/SpyderChecker24.cie /usr/share/color/argyll/ref/StandardObs2deg.cmf /usr/share/color/argyll/ref/Trulux.sp /usr/share/color/argyll/ref/TruluxPlus.sp /usr/share/color/argyll/ref/afiles /usr/share/color/argyll/ref/ccxx.ti1 /usr/share/color/argyll/ref/cmyk.icm /usr/share/color/argyll/ref/example.sp /usr/share/color/argyll/ref/example121.sp /usr/share/color/argyll/ref/flat.sp /usr/share/color/argyll/ref/i1_RGB_Scan_1.4.cht /usr/share/color/argyll/ref/i1_RGB_Scan_1.4.ti2 /usr/share/color/argyll/ref/it8.cht /usr/share/color/argyll/ref/it8Wolf.cht /usr/share/color/argyll/ref/lab2lab.icm /usr/share/color/argyll/ref/linear.cal /usr/share/color/argyll/ref/oled.cmf /usr/share/color/argyll/ref/oled_pos.cmf /usr/share/color/argyll/ref/sRGB.icm /usr/share/color/argyll/ref/strange.cal /usr/share/doc/packages/argyllcms /usr/share/doc/packages/argyllcms/License.txt /usr/share/doc/packages/argyllcms/License2.txt /usr/share/doc/packages/argyllcms/License3.txt /usr/share/doc/packages/argyllcms/ReadMe.txt /usr/share/doc/packages/argyllcms/log.txt
Generated by rpm2html 1.8.1
Fabrice Bellet, Thu Oct 23 22:29:00 2025