# packages

pkgId: c5e2e9788ce7a72128884950a0601fd90a0df4eeacaf7e966124e0902f2db092
name: perl-Test-Exception
arch: noarch
version: 0.43
epoch: 0
release: 28.el10
summary: Library of test functions for exception based Perl code
url: https://metacpan.org/release/Test-Exception
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: perl-Test-Exception-0.43-28.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-Exception-0.43-28.el10.noarch.rpm
checksum_type: sha256
description:
  This module provides a few convenience methods for testing exception
  based code. It is built with Test::Builder and plays happily with
  Test::More and friends.


pkgId: 545bc3f9af2835be95eea83136b0bf6752e00d936d072cf884c5e5aa73744356
name: perl-Test-Fatal
arch: noarch
version: 0.017
epoch: 0
release: 7.el10
summary: Incredibly simple helpers for testing code with exceptions
url: https://metacpan.org/release/Test-Fatal
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: perl-Test-Fatal-0.017-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-Fatal-0.017-7.el10.noarch.rpm
checksum_type: sha256
description:
  Test::Fatal is an alternative to the popular Test::Exception. It does much
  less, but should allow greater flexibility in testing exception-throwing code
  with about the same amount of typing.


pkgId: bb0ceeafd3a5801c1b86b512702163baa58f6c6b11a9e838feed7ecbd3460c95
name: perl-Test-NoWarnings
arch: noarch
version: 1.06
epoch: 0
release: 10.el10
summary: Make sure you didn't emit any warnings while testing
url: https://metacpan.org/release/Test-NoWarnings
rpm_license: LGPL-2.1-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Test-NoWarnings-1.06-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-NoWarnings-1.06-10.el10.noarch.rpm
checksum_type: sha256
description:
  In general, your tests shouldn't produce warnings. This module causes any
  warnings to be captured and stored. It automatically adds an extra test
  that will run when your script ends to check that there were no warnings.
  If there were any warnings, the test will give a "not ok" and diagnostics of
  where, when and what the warning was, including a stack trace of what was
  going on when the it occurred.


pkgId: 2903b6cf616defd718d4855f7db43243be7b51d4bbaae8e7a2ad9f35f1ef4a7f
name: perl-Test-Pod-Coverage
arch: noarch
version: 1.10
epoch: 0
release: 31.el10
summary: Check for pod coverage in your distribution
url: https://metacpan.org/release/Test-Pod-Coverage
rpm_license: Artistic-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Test-Pod-Coverage-1.10-31.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-Pod-Coverage-1.10-31.el10.noarch.rpm
checksum_type: sha256
description:
  Test::Pod::Coverage is used to create a test for your distribution, to
  ensure that all relevant files in your distribution are appropriately
  documented in pod.


pkgId: d88b92033d0c4e41c8bf6a0464e3938ae8cca0a5200ed623c50a90c602b89165
name: perl-Test-Requires
arch: noarch
version: 0.11
epoch: 0
release: 15.el10
summary: Checks to see if a given module can be loaded
url: https://metacpan.org/release/Test-Requires
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: perl-Test-Requires-0.11-15.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-Requires-0.11-15.el10.noarch.rpm
checksum_type: sha256
description:
  Test::Requires checks to see if the module can be loaded.

  If this fails, rather than failing tests this skips all tests.


pkgId: e7b7e305f07b72dd3314dd43b91a4e7cb824b1325d4093c83bd7a8aed522ced1
name: perl-Test-Warnings
arch: noarch
version: 0.033
epoch: 0
release: 2.el10
summary: Test for warnings and the lack of them
url: https://metacpan.org/release/Test-Warnings
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: perl-Test-Warnings-0.033-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Test-Warnings-0.033-2.el10.noarch.rpm
checksum_type: sha256
description:
  If you've ever tried to use Test::NoWarnings to confirm there are no warnings
  generated by your tests, combined with the convenience of done_testing to not
  have to declare a test count, you'll have discovered that these two features do
  not play well together, as the test count will be calculated before the
  warnings test is run, resulting in a TAP error (see examples/test_nowarnings.pl
  in this distribution for a demonstration).

  This module is intended to be used as a drop-in replacement for
  Test::NoWarnings: it also adds an extra test, but runs this test before
  done_testing calculates the test count, rather than after. It does this by
  hooking into done_testing as well as via an END block. You can declare a plan,
  or not, and things will still Just Work.

  It is actually equivalent to:

      use Test::NoWarnings 1.04 ':early';

  as warnings are still printed normally as they occur. You are safe, and
  enthusiastically encouraged, to perform a global search-replace of the above
  with use Test::Warnings; whether or not your tests have a plan.


pkgId: ad6433fc6d9e1be7752db6c75f9a45b7696db5daf95558dbac4dac14cbc36d04
name: perl-Text-CharWidth
arch: x86_64
version: 0.04
epoch: 0
release: 56.el10
summary: Get number of occupied columns of a string on terminal
url: https://metacpan.org/release/Text-CharWidth
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: perl-Text-CharWidth-0.04-56.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Text-CharWidth-0.04-56.el10.x86_64.rpm
checksum_type: sha256
description:
  This is a module to provide equivalent feature as wcwidth(3) and
  wcswidth(3). This also provides mblen(3) equivalent subroutine.


pkgId: dce6d27f90afbb17cec7a0fc0780f81ec508856943bdb6692ab903bfc83f36ad
name: perl-Text-WrapI18N
arch: noarch
version: 0.06
epoch: 0
release: 50.el10
summary: Line wrapping with support for several locale setups
url: https://metacpan.org/release/Text-WrapI18N
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Text-WrapI18N-0.06-50.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Text-WrapI18N-0.06-50.el10.noarch.rpm
checksum_type: sha256
description:
  This is a module which intends to substitute Text::Wrap,
  which supports internationalized texts including:
   - multi-byte encodings such as UTF-8, EUC-JP, EUC-KR, GB2312, and Big5,
   - full width characters like east Asian characters which appear in
     UTF-8, EUC-JP, EUC-KR, GB2312, Big5, and so on,
   - combining characters like diacritical marks which appear in UTF-8,
     ISO-8859-11 (aka TIS-620), and so on, and
   - languages which don't use white spaces between words, like Chinese
     and Japanese.


pkgId: bd8ef0b461ccf94d8d0218596ef5dfb5e34f12aebb56d60bac986856cdeade68
name: perl-Tie-IxHash
arch: noarch
version: 1.23
epoch: 0
release: 39.el10
summary: Ordered associative arrays for Perl
url: https://metacpan.org/release/Tie-IxHash
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Tie-IxHash-1.23-39.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Tie-IxHash-1.23-39.el10.noarch.rpm
checksum_type: sha256
description:
  This Perl module implements Perl hashes that preserve the order in
  which the hash elements were added. The order is not affected when
  values corresponding to existing keys in the IxHash are changed.
  The elements can also be set to any arbitrary supplied order. The
  familiar perl array operations can also be performed on the IxHash.


pkgId: 4fe88dc826026ca00b7b91969edf1209704a11020913e0221f6af8aa533f0616
name: perl-Types-Serialiser
arch: noarch
version: 1.01
epoch: 0
release: 13.el10
summary: Simple data types for common serialization formats
url: https://metacpan.org/release/Types-Serialiser
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Types-Serialiser-1.01-13.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Types-Serialiser-1.01-13.el10.noarch.rpm
checksum_type: sha256
description:
  This module provides some extra data types that are used by common
  serialization formats such as JSON or CBOR. The idea is to have a repository of
  simple/small constants and containers that can be shared by different
  implementations so they become inter-operable between each other.


pkgId: b33f5a0aba1e450f13736954bee9715ec14e93e2ab80f8f6118276214f65412e
name: perl-Unicode-EastAsianWidth
arch: noarch
version: 12.0
epoch: 0
release: 15.el10
summary: East Asian Width properties
url: https://metacpan.org/release/Unicode-EastAsianWidth
rpm_license: CC0-1.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: perl-Unicode-EastAsianWidth-12.0-15.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Unicode-EastAsianWidth-12.0-15.el10.noarch.rpm
checksum_type: sha256
description:
  This module provide user-defined Unicode properties that deal with width
  status of East Asian characters, as specified in
  <http://www.unicode.org/unicode/reports/tr11/>.


pkgId: 5e7b9e502bb40884f8517c9d7c99fba8ad6bb2cc1d41b04557f5e343e84fd691
name: perl-Unicode-UTF8
arch: x86_64
version: 0.62
epoch: 0
release: 27.el10
summary: Encoding and decoding of UTF-8 encoding form
url: https://metacpan.org/release/Unicode-UTF8
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: perl-Unicode-UTF8-0.62-27.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-Unicode-UTF8-0.62-27.el10.x86_64.rpm
checksum_type: sha256
description:
  This module provides functions to encode and decode UTF-8 encoding form as
  specified by Unicode and ISO/IEC 10646:2011.


pkgId: a042802e2536eb7f583398eb7c3eb749c43985ce119a7ee2d17131c77acaeb70
name: perl-XS-Parse-Keyword
arch: x86_64
version: 0.39
epoch: 0
release: 6.el10
summary: XS functions to assist in parsing keyword syntax
url: https://metacpan.org/release/XS-Parse-Keyword
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: perl-XS-Parse-Keyword-0.39-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-XS-Parse-Keyword-0.39-6.el10.x86_64.rpm
checksum_type: sha256
description:
  This module provides some XS functions to assist in writing syntax modules
  that provide new perl-visible syntax, primarily for authors of keyword plugins
  using the PL_keyword_plugin hook mechanism.


pkgId: 3b5283c5d4df8379046c7e7976c519245854f56634554677e8c7d60df5b0b009
name: perl-XS-Parse-Keyword-Builder
arch: x86_64
version: 0.39
epoch: 0
release: 7.el10
summary: Build-time support for XS::Parse::Keyword
url: https://metacpan.org/release/XS-Parse-Keyword
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: perl-XS-Parse-Keyword-0.39-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-XS-Parse-Keyword-Builder-0.39-7.el10.x86_64.rpm
checksum_type: sha256
description:
  This module provides a build-time helper to assist authors writing XS modules
  that use XS::Parse::Keyword. It prepares a Module::Build-using distribution to
  be able to make use of XS::Parse::Keyword.


pkgId: fb4794089e4f1bf3c7ad9cd23b77e431c6c414756dc39e7468c887e040cebf72
name: perl-XString
arch: x86_64
version: 0.005
epoch: 0
release: 15.el10
summary: Isolated String helpers from B
url: https://metacpan.org/release/XString
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: perl-XString-0.005-15.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-XString-0.005-15.el10.x86_64.rpm
checksum_type: sha256
description:
  XString provides the B string helpers in one isolated package. Right now only
  cstring and perlstring are available.


pkgId: f91165e9d7b302c2cb926ee398b477c82f3eab71c6cb2b92a32ab26a4f4a2f24
name: perl-YAML-Tiny
arch: noarch
version: 1.74
epoch: 0
release: 7.el10
summary: Read/Write YAML files with as little code as possible
url: https://metacpan.org/release/YAML-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: perl-YAML-Tiny-1.74-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-YAML-Tiny-1.74-7.el10.noarch.rpm
checksum_type: sha256
description:
  YAML::Tiny is a Perl class for reading and writing YAML-style files,
  written with as little code as possible, reducing load time and
  memory overhead.


pkgId: 4c6cdefa176d71fbfb0be3b2822cd6d7750f5b2897d0e8b9eeb8609aade30643
name: perl-common-sense
arch: x86_64
version: 3.7.5
epoch: 0
release: 19.el10
summary: "Common sense" Perl defaults
url: https://metacpan.org/release/common-sense
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: perl-common-sense-3.7.5-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/perl-common-sense-3.7.5-19.el10.x86_64.rpm
checksum_type: sha256
description:
  This module implements some sane defaults for Perl programs, as defined
  by two typical (or not so typical - use your common sense) specimens of
  Perl coders:

  It's supposed to be mostly the same, with much lower memory usage, as:

  	use utf8;
  	use strict qw(vars subs);
  	use feature qw(say state switch);
  	use feature qw(unicode_strings unicode_eval current_sub fc evalbytes);
  	no feature qw(array_base);
  	no warnings;
  	use warnings qw(FATAL closed threads internal debugging pack
  			prototype inplace io pipe unpack malloc
  			deprecated glob digit printf layer
  			reserved taint closure semicolon);
  	no warnings qw(exec newline unopened);


pkgId: 5ed0fe9deca16f68756c47e997c3355ec19a65578cca7991a8dcc0b2d2102cd9
name: plexus-archiver
arch: noarch
version: 4.9.1
epoch: 0
release: 3.el10
summary: Plexus Archiver Component
url: https://codehaus-plexus.github.io/plexus-archiver
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: plexus-archiver-4.9.1-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/plexus-archiver-4.9.1-3.el10.noarch.rpm
checksum_type: sha256
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.


pkgId: 9ddaec3e7bfaf382922a03db8c99d90857b73cf86be4b278ac1b874e71d98e16
name: plexus-compiler
arch: noarch
version: 2.14.2
epoch: 0
release: 3.el10
summary: Compiler call initiators for Plexus
url: https://github.com/codehaus-plexus/plexus-compiler
rpm_license: MIT AND Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: plexus-compiler-2.14.2-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/plexus-compiler-2.14.2-3.el10.noarch.rpm
checksum_type: sha256
description:
  Plexus Compiler adds support for using various compilers from a
  unified api. Support for javac is available in main package. For
  additional compilers see plexus-compiler-extras package.


pkgId: e61b9ca2feb6abcb0258de1f34541437fbd19d5c149514f8fbf8ef1da2111307
name: plexus-pom
arch: noarch
version: 16
epoch: 0
release: 3.el10
summary: Root Plexus Projects POM
url: https://github.com/codehaus-plexus/plexus-pom
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: plexus-pom-16-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/plexus-pom-16-3.el10.noarch.rpm
checksum_type: sha256
description:
  The Plexus project provides a full software stack for creating and
  executing software projects. This package provides parent POM for
  Plexus packages.


pkgId: d8292d70605e5b925dadf3b3868846796ae01ee4738f65a925ce2df1831b5989
name: po4a
arch: noarch
version: 0.69
epoch: 0
release: 6.el10
summary: A tool maintaining translations anywhere
url: https://po4a.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: po4a-0.69-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/po4a-0.69-6.el10.noarch.rpm
checksum_type: sha256
description:
  The po4a (po for anything) project goal is to ease translations (and
  more interestingly, the maintenance of translations) using gettext
  tools on areas where they were not expected like documentation.


pkgId: a9baea1b086d07c417cc58b954e2dc0925df1947540530553054b0e4d7661c30
name: podman-tests
arch: x86_64
version: 5.6.0
epoch: 6
release: 1.el10
summary: Tests for podman
url: https://podman.io/
rpm_license: Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND ISC AND MIT AND MPL-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: podman-5.6.0-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/podman-tests-5.6.0-1.el10.x86_64.rpm
checksum_type: sha256
description:
  Tests for podman

  This package contains system tests for podman. Only intended to be used for
  gating tests. Not supported for end users / customers.


pkgId: f28c54768278e3c9f34feb68c3a58d89a5b185f6fd6da49a4c312cd5e7e7c033
name: poppler-cpp-devel
arch: x86_64
version: 24.02.0
epoch: 0
release: 4.el10
summary: Development files for C++ wrapper
description: Development files for C++ wrapper.
url: http://poppler.freedesktop.org/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: poppler-24.02.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/poppler-cpp-devel-24.02.0-4.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  (GPL-2.0-only OR GPL-3.0-only) AND GPL-2.0-or-later AND LGPL-2.0-or-later AND LGPL-2.1-or-later AND MIT


pkgId: 5b9280bf7432c12bb0db09cc722043a930fe742337b58b10d87b6a800479f356
name: poppler-data-devel
arch: noarch
version: 0.4.11
epoch: 0
release: 8.el10
summary: Devel files for poppler-data
url: https://poppler.freedesktop.org/
rpm_license: (GPL-2.0-only OR GPL-3.0-only) AND BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: poppler-data-0.4.11-8.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/poppler-data-devel-0.4.11-8.el10.noarch.rpm
checksum_type: sha256
description:
  This sub-package currently contains only pkgconfig file, which can be used with
  pkgconfig utility allowing your software to be build with poppler-data.


pkgId: 296ea807c9529ed74bd685cdd9d9778773a7de581c899f416602673fbf26ed37
name: poppler-devel
arch: x86_64
version: 24.02.0
epoch: 0
release: 4.el10
summary: Libraries and headers for poppler
url: http://poppler.freedesktop.org/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: poppler-24.02.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/poppler-devel-24.02.0-4.el10.x86_64.rpm
checksum_type: sha256
description:
  You should install the poppler-devel package if you would like to
  compile applications based on poppler.

rpm_license:
[cell repeats an earlier one in this file: 103 characters]


pkgId: 1ebff665fe6574ec3dd1790a3fac7ac660239145b1c9244ffaf597e028d390e1
name: postgresql-test-rpm-macros
arch: noarch
version: 16.10
epoch: 0
release: 1.el10
summary: Convenience RPM macros for build-time testing against PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: postgresql16-16.10-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/postgresql-test-rpm-macros-16.10-1.el10.noarch.rpm
checksum_type: sha256
description:
  This package is meant to be added as BuildRequires: dependency of other packages
  that want to run build-time testsuite against running PostgreSQL server.


pkgId: 7e116cf1c71f2c7dbd9b1182d636ed88397709e3d7c2780a42292760ed79f7e5
name: ppp-devel
arch: x86_64
version: 2.5.0
epoch: 0
release: 12.el10
summary: Headers for ppp plugin development
description: This package contains the header files for building plugins for ppp.
url: http://www.samba.org/ppp
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: ppp-2.5.0-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/ppp-devel-2.5.0-12.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  bsd-3-clause AND zlib AND licenseref-fedora-public-domain AND bsd-attribution-hpnd-disclaimer AND bsd-4.3tahoe AND bsd-4-clause-uc AND apache-2.0 AND lgpl-2.0-or-later AND (gpl-2.0-or-later OR bsd-2-clause OR bsd-3-clause OR bsd-4-clause) AND gpl-2.0-or-later AND xlock AND gpl-1.0-or-later AND mackerras-3-clause-acknowledgment AND mackerras-3-clause AND hpnd-fenneberg-Livingston AND sun-ppp AND hpnd-inria-imag AND sun-ppp-2000


pkgId: 7b9ac24c87df0e75e2f5b2fa6dcaf678e4105a72ae0506c1050e8dd79188bef9
name: protobuf-c-compiler
arch: x86_64
version: 1.5.0
epoch: 0
release: 5.el10
summary: Protocol Buffers C compiler
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: protobuf-c-1.5.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/protobuf-c-compiler-1.5.0-5.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains a modified version of the Protocol Buffers
  compiler for the C programming language called protoc-c.


pkgId: c2148baeb5334289370d1cba6c096e575a87473cad7eba9263451c0c70e5eaf3
name: protobuf-lite-devel
arch: x86_64
version: 3.19.6
epoch: 0
release: 10.el10
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/protocolbuffers/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: protobuf-3.19.6-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/protobuf-lite-devel-3.19.6-10.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 8c2f8a6e1a26bbe273e1e4458f7f3f9246a33128942b945e21e1f153e2e7239a
name: py3c-devel
arch: x86_64
version: 1.4
epoch: 0
release: 10.el10
summary: Header files for py3c
url: http://py3c.readthedocs.io/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: py3c-1.4-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/py3c-devel-1.4-10.el10.x86_64.rpm
checksum_type: sha256
description:
  py3c-devel is only required for building software that uses py3c.
  Because py3c is a header-only library, there is no matching run-time package.


pkgId: a70201aa7f6ef2d20acc7a5be2cbc0a48a8a1a2b0d0f62495cbff05667efc481
name: pybind11-devel
arch: x86_64
version: 2.11.1
epoch: 0
release: 6.el10
summary: Development headers for pybind11
url: https://github.com/pybind/pybind11
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: pybind11-2.11.1-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/pybind11-devel-2.11.1-6.el10.x86_64.rpm
checksum_type: sha256
description:
  pybind11 is a lightweight header-only library that exposes C++ types
  in Python and vice versa, mainly to create Python bindings of existing
  C++ code.

  This package contains the development headers for pybind11.


pkgId: ef81748fcb60b6015021f44fec2ca1ddf95ac42bcb516ec0b62a97f73468a035
name: pyproject-rpm-macros
arch: noarch
version: 1.14.0
epoch: 0
release: 1.el10
summary: RPM macros for PEP 517 Python packages
url: https://src.fedoraproject.org/rpms/pyproject-rpm-macros
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: pyproject-rpm-macros-1.14.0-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/pyproject-rpm-macros-1.14.0-1.el10.noarch.rpm
checksum_type: sha256
description:
  These macros allow projects that follow the Python packaging specifications
  to be packaged as RPMs.

  They work for:

  * traditional Setuptools-based projects that use the setup.py file,
  * newer Setuptools-based projects that have a setup.cfg file,
  * general Python projects that use the PEP 517 pyproject.toml file
    (which allows using any build system, such as setuptools, flit or poetry).

  These macros replace %py3_build and %py3_install,
  which only work with setup.py.


pkgId: a960f3bc189fdba315ce22e71eb7337a20491c939f3febc6affc4347803928b4
name: python-sphinx-doc
arch: noarch
version: 7.2.6
epoch: 1
release: 10.el10
summary: Documentation for python-sphinx
url: https://www.sphinx-doc.org/
rpm_license: BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-sphinx-7.2.6-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python-sphinx-doc-7.2.6-10.el10.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  This package contains documentation in the HTML format.


pkgId: 7966238b823c4b677d40e2729a791ebfb5854f0692885de4bd28a77d32a352aa
name: python3-PyMySQL+rsa
arch: noarch
version: 1.1.1
epoch: 0
release: 3.el10
summary: Metapackage for python3-PyMySQL: rsa extras
url: https://pypi.org/project/pymysql/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-PyMySQL-1.1.1-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-PyMySQL+rsa-1.1.1-3.el10.noarch.rpm
checksum_type: sha256
description:
  This is a metapackage bringing in rsa extras requires for python3-PyMySQL.
  It makes sure the dependencies are installed.


pkgId: 96cb3fea217abd342c10f0ad049c86f15f043fecbf4b71edf60d2b7052c8d9da
name: python3-cairo-devel
arch: x86_64
version: 1.25.1
epoch: 0
release: 4.el10
summary: Libraries and headers for py3cairo
url: https://www.cairographics.org/pycairo
rpm_license: LGPL-2.1-only OR MPL-1.1
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: pycairo-1.25.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-cairo-devel-1.25.1-4.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for cairo add-on
  libraries so that they interoperate with py3cairo.


pkgId: 57ad3e4a169c13c02f609cbc42addf8f582988fc7b80bb0b65e4e6a58f26abc8
name: python3-capstone
arch: noarch
version: 5.0.1
epoch: 0
release: 4.el10
summary: Python3 bindings for capstone
url: http://www.capstone-engine.org/
rpm_license: BSD-3-Clause AND BSD-4-Clause AND APSL-2.0 AND NCSA AND MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: capstone-5.0.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-capstone-5.0.1-4.el10.noarch.rpm
checksum_type: sha256
description:
  Capstone is a disassembly framework with the target of becoming the ultimate
  disasm engine for binary analysis and reversing in the security community.
  The python3-capstone package contains python3 bindings for capstone.


pkgId: 9392ab686e7207646c5151e2ff3c67639bd98f3fb1f06c6e346e9c818d56789e
name: python3-cython
arch: x86_64
version: 3.0.9
epoch: 0
release: 7.el10
summary: Language for writing Python extension modules
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: Cython-3.0.9-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-cython-3.0.9-7.el10.x86_64.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as easy
  as Python itself. Cython is a source code translator based on Pyrex,
  but supports more cutting edge functionality and optimizations.

  The Cython language is a superset of the Python language (almost all Python
  code is also valid Cython code), but Cython additionally supports optional
  static typing to natively call C functions, operate with C++ classes and
  declare fast C types on variables and class attributes.
  This allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C/C++
  libraries, and for fast C modules that speed up the execution of Python code.


pkgId: 610c63ee51ff171c808e157bd7f2f55776ba777e06907a3b211937164b69849d
name: python3-debug
arch: x86_64
version: 3.12.10
epoch: 0
release: 1.el10
summary: Debug version of the Python runtime
url: https://www.python.org/
rpm_license: Python-2.0.1
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: python3.12-3.12.10-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-debug-3.12.10-1.el10.x86_64.rpm
checksum_type: sha256
description:
  python3-debug provides a version of the Python runtime with numerous debugging
  features enabled, aimed at advanced Python users such as developers of Python
  extension modules.

  This version uses more memory and will be slower than the regular Python build,
  but is useful for tracking down reference-counting issues and other bugs.

  The debug build shares installation directories with the standard Python
  runtime. Python modules -- source (.py), bytecode (.pyc), and C-API extensions
  (.cpython*.so) -- are compatible between this and the standard version
  of Python.

  The debug runtime additionally supports debug builds of C-API extensions
  (with the "d" ABI flag) for debugging issues in those extensions.


pkgId: c28590e311ca6defcc4f5f4b17eeb5f442ae3c6c26c8aece73f23e53ee6cbcdf
name: python3-docutils
arch: noarch
version: 0.20.1
epoch: 0
release: 4.el10
summary: System for processing plaintext documentation
url: https://docutils.sourceforge.net
rpm_license: LicenseRef-Fedora-Public-Domain AND BSD-2-Clause AND BSD-3-Clause AND PSF-2.0 AND GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-docutils-0.20.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-docutils-0.20.1-4.el10.noarch.rpm
checksum_type: sha256
description:
  The Docutils project specifies a plaintext markup language, reStructuredText,
  which is easy to read and quick to write.  The project includes a python
  library to parse rST files and transform them into other useful formats such
  as HTML, XML, and TeX as well as commandline tools that give the enduser
  access to this functionality.

  Currently, the library supports parsing rST that is in standalone files and
  PEPs (Python Enhancement Proposals).  Work is underway to parse rST from
  Python inline documentation modules and packages.


pkgId: b22ddaea8e717ae4f4b2d0899cce2a743f472de20e93765d9a742bac85436a6b
name: python3-flit-core
arch: noarch
version: 3.9.0
epoch: 0
release: 7.el10
summary: PEP 517 build backend for packages using Flit
url: https://flit.pypa.io/
rpm_license: BSD-3-Clause AND BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-flit-core-3.9.0-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-flit-core-3.9.0-7.el10.noarch.rpm
checksum_type: sha256
description:
  This provides a PEP 517 build backend for packages using Flit.
  The only public interface is the API specified by PEP 517,
  at flit_core.buildapi.


pkgId: fa18d60072a2d0c8dcf1a9a0b8fc620454ee3266c5b1959fadb855bcfb81caa1
name: python3-idle
arch: x86_64
version: 3.12.10
epoch: 0
release: 1.el10
summary: A basic graphical development environment for Python
url: https://www.python.org/
rpm_license: Python-2.0.1
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: python3.12-3.12.10-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-idle-3.12.10-1.el10.x86_64.rpm
checksum_type: sha256
description:
  IDLE is Python’s Integrated Development and Learning Environment.

  IDLE has the following features: Python shell window (interactive
  interpreter) with colorizing of code input, output, and error messages;
  multi-window text editor with multiple undo, Python colorizing,
  smart indent, call tips, auto completion, and other features;
  search within any window, replace within editor windows, and
  search through multiple files (grep); debugger with persistent
  breakpoints, stepping, and viewing of global and local namespaces;
  configuration, browsers, and other dialogs.


pkgId: 63410d0b087cb16fc88258900848fd80de3afbe0cfe9d47220243ca1f6c451e6
name: python3-imagesize
arch: noarch
version: 1.4.1
epoch: 0
release: 8.el10
summary: Python module for analyzing image file headers and returning image sizes
url: https://github.com/shibukawa/imagesize_py
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-imagesize-1.4.1-8.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-imagesize-1.4.1-8.el10.noarch.rpm
checksum_type: sha256
description:
  The imagesize package parses image file headers and returns the image sizes.

  * PNG
  * JPEG
  * JPEG2000
  * GIF

  This is a pure Python library.


pkgId: 69ccfcea14f2ce2735e2b40c0215e4529ba84959e70f3f2176bfa601d9ac6f51
name: python3-iniconfig
arch: noarch
version: 1.1.1
epoch: 0
release: 17.el10
summary: Brain-dead simple parsing of ini files
url: http://github.com/RonnyPfannschmidt/iniconfig
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-iniconfig-1.1.1-17.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-iniconfig-1.1.1-17.el10.noarch.rpm
checksum_type: sha256
description:
  iniconfig is a small and simple INI-file parser module
  having a unique set of features:

  * tested against Python2.4 across to Python3.2, Jython, PyPy
  * maintains order of sections and entries
  * supports multi-line values with or without line-continuations
  * supports "#" comments everywhere
  * raises errors with proper line-numbers
  * no bells and whistles like automatic substitutions
  * iniconfig raises an Error if two sections have the same name.


pkgId: 66012163b2fc6276aa39742dbd418a5e8a904f43482eee978e9f084b5fc668cb
name: python3-installer
arch: noarch
version: 0.7.0
epoch: 0
release: 7.el10
summary: A library for installing Python wheels
url: https://github.com/pypa/installer
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-installer-0.7.0-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-installer-0.7.0-7.el10.noarch.rpm
checksum_type: sha256
description:
  This is a low-level library for installing a Python package from
  a wheel distribution. It provides basic functionality and abstractions
  for handling wheels and installing packages from wheels.


pkgId: 049c6cde18f19c162ac1bf37f264841a1b728463c3fdda524dd729f8bde0bdff
name: python3-ipatests
arch: noarch
version: 4.12.2
epoch: 0
release: 12.el10
summary: IPA tests and test tools
url: http://www.freeipa.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: ipa-4.12.2-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-ipatests-4.12.2-12.el10.noarch.rpm
checksum_type: sha256
description:
  IPA is an integrated solution to provide centrally managed Identity (users,
  hosts, services), Authentication (SSO, 2FA), and Authorization
  (host access control, SELinux user roles, services). The solution provides
  features for further integration with Linux based clients (SUDO, automount)
  and integration with Active Directory based infrastructures (Trusts).
  This package contains tests that verify IPA functionality under Python 3.


pkgId: f4d870aca125be335653d56a17687c1e55b6717c53f5caf9ad18524cf4529ad8
name: python3-javapackages
arch: noarch
version: 6.2.0
epoch: 0
release: 11.el10
summary: Module for handling various files for Java packaging
url: https://github.com/fedora-java/javapackages
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: javapackages-tools-6.2.0-11.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-javapackages-6.2.0-11.el10.noarch.rpm
checksum_type: sha256
description:
  Module for handling, querying and manipulating of various files for Java
  packaging in Linux distributions


pkgId: 4aac1abb6abf8fa26070ae8450d676345e1abcc586626ea6f7dd5ef7f6e37576
name: python3-jinja2+i18n
arch: noarch
version: 3.1.4
epoch: 0
release: 2.el10
summary: Metapackage for python3-jinja2: i18n extras
url: https://palletsprojects.com/p/jinja/
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: ppc64le-builder01.almalinux.org
rpm_sourcerpm: python-jinja2-3.1.4-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-jinja2+i18n-3.1.4-2.el10.noarch.rpm
checksum_type: sha256
description:
  This is a metapackage bringing in i18n extras requires for python3-jinja2.
  It makes sure the dependencies are installed.


pkgId: 1bfba653c2171ac0a5188ac0ce219f3fa3a9b2b0b3aacd659edbfe5955ea2400
name: python3-lesscpy
arch: noarch
version: 0.14.0
epoch: 0
release: 16.el10
summary: Lesscss compiler
url: https://github.com/robotis/lesscpy
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-lesscpy-0.14.0-16.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-lesscpy-0.14.0-16.el10.noarch.rpm
checksum_type: sha256
description:
  A compiler written in python 3 for the lesscss language.  For those of us not
  willing/able to have node.js installed in our environment.  Not all features
  of lesscss are supported (yet).  Some features wil probably never be
  supported (JavaScript evaluation).


pkgId: fe79fdf38aa6dfcf39bcc22db7c8038065ca7e12aed66db7f82e486188b5f1b7
name: python3-pathspec
arch: noarch
version: 0.12.1
epoch: 0
release: 4.el10
summary: Utility library for gitignore style pattern matching of file paths
url: https://github.com/cpburnz/python-path-specification
rpm_license: MPL-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-pathspec-0.12.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pathspec-0.12.1-4.el10.noarch.rpm
checksum_type: sha256
description:
  Path Specification (pathspec) is a utility library for pattern matching of file
  paths. So far this only includes Git's wildmatch pattern matching which itself
  is derived from Rsync's wildmatch. Git uses wildmatch for its gitignore files.


pkgId: bc46b56602bcd283532aeb53ca30879cf9a221db6d5b989ac3472515b3f351e9
name: python3-pybind11
arch: x86_64
version: 2.11.1
epoch: 0
release: 6.el10
summary: Development headers for pybind11
url: https://github.com/pybind/pybind11
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: pybind11-2.11.1-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pybind11-2.11.1-6.el10.x86_64.rpm
checksum_type: sha256
description:
  pybind11 is a lightweight header-only library that exposes C++ types
  in Python and vice versa, mainly to create Python bindings of existing
  C++ code.

  This package contains the Python 3 files.


pkgId: 55f2ea156a555289a68f4d23cd94fa0ddf3ea428201773a72e08f042b807e8ca
name: python3-pygments
arch: noarch
version: 2.17.2
epoch: 0
release: 4.el10
summary: Syntax highlighting engine written in Python
url: https://pygments.org/
rpm_license: BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-pygments-2.17.2-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pygments-2.17.2-4.el10.noarch.rpm
checksum_type: sha256
description:
  Pygments is a generic syntax highlighter suitable for use in code hosting,
  forums, wikis or other applications that need to prettify source code.

  Highlights are:

   * a wide range of over 500 languages and other text formats is supported
   * special attention is paid to details that increase highlighting quality
   * support for new languages and formats are added easily;
     most languages use a simple regex-based lexing mechanism
   * a number of output formats is available, among them HTML, RTF, LaTeX
     and ANSI sequences
   * it is usable as a command-line tool and as a library


pkgId: a8f14bafe2bb3d4455a9ba4ebc97b0a56bd8566386c61a5e20851df71a68cd2f
name: python3-pyproject-hooks
arch: noarch
version: 1.0.0
epoch: 0
release: 13.el10
summary: Wrappers to call pyproject.toml-based build backend hooks
url: https://pypi.org/project/pyproject_hooks/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-pyproject-hooks-1.0.0-13.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pyproject-hooks-1.0.0-13.el10.noarch.rpm
checksum_type: sha256
description:
  This is a low-level library for calling build-backends in
  pyproject.toml-based project. It provides the basic functionality
  to help write tooling that generates distribution files from
  Python projects.


pkgId: f2e9a2c336d8a9c9115a34105d1bf642963f38c9e9107d9a73218f51c1c27a30
name: python3-pytest
arch: noarch
version: 7.4.3
epoch: 0
release: 4.el10
summary: Simple powerful testing with Python
url: https://pytest.org
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: pytest-7.4.3-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pytest-7.4.3-4.el10.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support
  complex functional testing for applications and libraries.


pkgId: 84f6f942d2059d96dacf21108dd05fcfaae3b141efbbfca3de9aa738b0efcb33
name: python3-pytest-timeout
arch: noarch
version: 2.2.0
epoch: 0
release: 4.el10
summary: py.test plugin to abort hanging tests
url: https://github.com/pytest-dev/pytest-timeout
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-pytest-timeout-2.2.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pytest-timeout-2.2.0-4.el10.noarch.rpm
checksum_type: sha256
description:
  This is a plugin which will terminate tests after a certain timeout. When doing
  so it will show a stack dump of all threads running at the time. This is useful
  when running tests under a continuous integration server or simply if you don’t
  know why the test suite hangs.


pkgId: 19accb03e975ddd89e0a10e5ac573e46a92e25a02ccb1d1958b3eb4d7b6c4459
name: python3-pyxattr
arch: x86_64
version: 0.7.2
epoch: 0
release: 13.el10
summary: Extended attributes library wrapper for Python
url: https://pyxattr.k1024.org/
rpm_license: LGPLv2+
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: pyxattr-0.7.2-13.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-pyxattr-0.7.2-13.el10.x86_64.rpm
checksum_type: sha256
description:
  Python extension module wrapper for libattr. It allows to query, list,
  add and remove extended attributes from files and directories.


pkgId: b8d733aabe013eff1ea8ea3b9190c6684a5d164b531ab2b6715f2ce4cc5e7472
name: python3-rrdtool
arch: x86_64
version: 1.8.0
epoch: 0
release: 19.el10
summary: Python RRDtool bindings
description: Python RRDtool bindings.
url: https://oss.oetiker.ch/rrdtool/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: rrdtool-1.8.0-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-rrdtool-1.8.0-19.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  gpl-1.0-or-later AND gpl-2.0-or-later AND gpl-2.0-or-later WITH rrdtool-floss-exception-2.0 AND mit AND lgpl-2.0-or-later AND lgpl-2.1-or-later AND bsd-source-code AND snprintf AND bsd-3-clause AND gpl-2.0-only AND licenseref-fedora-public-domain AND gtkbook


pkgId: b60f904b177de167a2cf272c9927da7b7447efcbc769337594c1f4a75968ed27
name: python3-samba-test
arch: x86_64
version: 4.20.2
epoch: 0
release: 104.el10
summary: Samba Python libraries
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: samba-4.20.2-104.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-samba-test-4.20.2-104.el10.x86_64.rpm
checksum_type: sha256
description:
  The python3-samba-test package contains the Python libraries used by the test suite of Samba.
  If you want to run full set of Samba tests, you need to install this package.


pkgId: 78920b24416e19836113737d04fca51b2efd6c201d3594fbc6f8a7b2d4cd556f
name: python3-setuptools-rust
arch: noarch
version: 1.10.2
epoch: 0
release: 1.el10
summary: Setuptools Rust extension plugin
url: https://github.com/PyO3/setuptools-rust
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-setuptools-rust-1.10.2-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-setuptools-rust-1.10.2-1.el10.noarch.rpm
checksum_type: sha256
description:
  Setuptools helpers for Rust Python extensions. Compile and distribute Python
  extensions written in Rust as easily as if they were written in C.


pkgId: afc670959929bea8ddffc1095a175b6358b6c41bda382ebf091a2d6a48186ea5
name: python3-setuptools_scm+toml
arch: noarch
version: 8.0.4
epoch: 0
release: 4.el10
summary: Metapackage for python3-setuptools_scm: toml extras
url: https://github.com/pypa/setuptools_scm/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-setuptools_scm-8.0.4-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-setuptools_scm+toml-8.0.4-4.el10.noarch.rpm
checksum_type: sha256
description:
  This is a metapackage bringing in toml extras requires for
  python3-setuptools_scm.
  It makes sure the dependencies are installed.


pkgId: 0f11caf87e1c3491602aa57aba11e3371d0f1f564508c5b80bd0368e371732e6
name: python3-setuptools_scm
arch: noarch
version: 8.0.4
epoch: 0
release: 4.el10
summary: Blessed package to manage your versions by SCM tags
url: https://github.com/pypa/setuptools_scm/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-setuptools_scm-8.0.4-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-setuptools_scm-8.0.4-4.el10.noarch.rpm
checksum_type: sha256
description:
  Setuptools_scm handles managing your Python package versions in SCM metadata.
  It also handles file finders for the supported SCMs.


pkgId: 6726ffaef1c6a87ba03228b546f1215c34de2405b86e1e1ffc24efbbea041d7c
name: python3-sphinx
arch: noarch
version: 7.2.6
epoch: 1
release: 10.el10
summary: Python documentation generator
url: https://www.sphinx-doc.org/
rpm_license: BSD-2-Clause AND MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-sphinx-7.2.6-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-sphinx-7.2.6-10.el10.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  Sphinx uses reStructuredText as its markup language, and many of its
  strengths come from the power and straightforwardness of
  reStructuredText and its parsing and translating suite, the Docutils.

  Although it is still under constant development, the following
  features are already present, work fine and can be seen "in action" in
  the Python docs:

      * Output formats: HTML (including Windows HTML Help) and LaTeX,
        for printable PDF versions
      * Extensive cross-references: semantic markup and automatic links
        for functions, classes, glossary terms and similar pieces of
        information
      * Hierarchical structure: easy definition of a document tree, with
        automatic links to siblings, parents and children
      * Automatic indices: general index as well as a module index
      * Code handling: automatic highlighting using the Pygments highlighter
      * Various extensions are available, e.g. for automatic testing of
        snippets and inclusion of appropriately formatted docstrings.


pkgId: e8421eca135281a1096a9e6ac12d41265939f43f328d02e017410320ff1546d1
name: python3-sphinx-latex
arch: noarch
version: 7.2.6
epoch: 1
release: 10.el10
summary: LaTeX builder dependencies for python3-sphinx
url: https://www.sphinx-doc.org/
rpm_license: BSD-2-Clause AND MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-sphinx-7.2.6-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-sphinx-latex-7.2.6-10.el10.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  This package pulls in the TeX dependencies needed by Sphinx's LaTeX
  builder.


pkgId: fac48af307bb21b5b711c9632a9fa84896231066e2ab98b4b222e8473669bee2
name: python3-sphinx-theme-alabaster
arch: noarch
version: 0.7.16
epoch: 0
release: 4.el10
summary: Configurable sidebar-enabled Sphinx theme
url: https://pypi.python.org/pypi/alabaster
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-sphinx-theme-alabaster-0.7.16-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-sphinx-theme-alabaster-0.7.16-4.el10.noarch.rpm
checksum_type: sha256
description:
  Alabaster is a visually (c)lean, responsive, configurable theme for the Sphinx
  documentation system.

  It began as a third-party theme, and is still maintained separately,
  but as of Sphinx 1.3, Alabaster is an install-time dependency of Sphinx and is
  selected as the default theme.


pkgId: 319026aa37fb372f41c73b45f800f246c091133376b47c4de2c967dffa9865f8
name: python3-sphinx_rtd_theme
arch: noarch
version: 2.0.0
epoch: 0
release: 4.el10
summary: Sphinx theme for readthedocs.org
url: https://github.com/readthedocs/sphinx_rtd_theme/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-sphinx_rtd_theme-2.0.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-sphinx_rtd_theme-2.0.0-4.el10.noarch.rpm
checksum_type: sha256
description:
  This is a prototype mobile-friendly sphinx theme for readthedocs.org.
  It's currently in development and includes some rtd variable checks that
  can be ignored if you're just trying to use it on your project outside
  of that site.


pkgId: 75a27495f1017cbe28a705b62b88b3c5c60991049c8cb652061665aaad700b35
name: python3-sphinxcontrib-jquery
arch: noarch
version: 4.1
epoch: 0
release: 8.el10
summary: Extension to include jQuery on newer Sphinx releases
url: https://github.com/sphinx-contrib/jquery/
rpm_license: 0BSD AND BSD-2-Clause AND MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-sphinxcontrib-jquery-4.1-8.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-sphinxcontrib-jquery-4.1-8.el10.noarch.rpm
checksum_type: sha256
description:
  sphinxcontrib-jquery is a Sphinx extension that ensures that jQuery
  is always installed for use in Sphinx themes or extensions.


pkgId: 6a7d9ff337f5ccea654af6789debcf18acf33cadfe13c2c1d8a8dffc66a77187
name: python3-test
arch: x86_64
version: 3.12.10
epoch: 0
release: 1.el10
summary: The self-test suite for the main python3 package
url: https://www.python.org/
rpm_license: Python-2.0.1
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: python3.12-3.12.10-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-test-3.12.10-1.el10.x86_64.rpm
checksum_type: sha256
description:
  The self-test suite for the Python interpreter.

  This is only useful to test Python itself. For testing general Python code,
  you should use the unittest module from python3-libs, or a library such as
  python3-pytest.


pkgId: 1a9993addec49dca30e592b7bbd8b9e96f618827be5870713f27ee5295c05956
name: python3-testpath
arch: noarch
version: 0.6.0
epoch: 0
release: 11.el10
summary: Test utilities for code working with files and commands
url: https://github.com/jupyter/testpath
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-testpath-0.6.0-11.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-testpath-0.6.0-11.el10.noarch.rpm
checksum_type: sha256
description:
  Testpath is a collection of utilities for Python code working with files and
  commands.

  It contains functions to check things on the filesystem, and tools for
  mocking system commands and recording calls to those.


pkgId: 8e4cccd327d3e864737d06ea038d57e5691e3332b242393266fb22234391b79d
name: python3-trove-classifiers
arch: noarch
version: 2023.10.18
epoch: 0
release: 4.el10
summary: Canonical source for classifiers on PyPI (pypi.org)
url: https://github.com/pypa/trove-classifiers
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: python-trove-classifiers-2023.10.18-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-trove-classifiers-2023.10.18-4.el10.noarch.rpm
checksum_type: sha256
description:
  Canonical source for classifiers on PyPI.
  Classifiers categorize projects per PEP 301. Use this package to validate
  classifiers in packages for PyPI upload or download.


pkgId: 1d1de7bc9cf94e4552b1eaec975f1eaa7ea277ea5f8f3bc49d964b80bce19146
name: python3-wheel
arch: noarch
version: 0.41.2
epoch: 1
release: 4.el10
summary: Built-package format for Python
url: https://github.com/pypa/wheel
rpm_license: MIT AND (Apache-2.0 OR BSD-2-Clause)
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: python-wheel-0.41.2-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/python3-wheel-0.41.2-4.el10.noarch.rpm
checksum_type: sha256
description:
  Wheel is the reference implementation of the Python wheel packaging standard,
  as defined in PEP 427.

  It has two different roles:

   1. A setuptools extension for building wheels that provides the bdist_wheel
      setuptools command.
   2. A command line tool for working with wheel files.


pkgId: a9b97bdeb6d12e5650e620fe4935fff5a2ba1b939755186c89eb67dbd77801c1
name: qatlib-devel
arch: x86_64
version: 24.09.0
epoch: 0
release: 1.el10
summary: Headers and libraries to build applications that use qatlib
url: https://github.com/intel/qatlib
rpm_license: BSD-3-Clause AND ( BSD-3-Clause OR GPL-2.0-only )
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: qatlib-24.09.0-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/qatlib-devel-24.09.0-1.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains headers and libraries required to build applications
  that use the Intel QuickAssist APIs.


pkgId: 59cbb95297ddd599b518298b4925442360f5a76dca2df121efd7de1ea70d74b3
name: qatzip-devel
arch: x86_64
version: 1.2.0
epoch: 0
release: 3.el10
summary: Development components for the libqatzip package
url: https://github.com/intel/QATzip
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: qatzip-1.2.0-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/qatzip-devel-1.2.0-3.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains headers and libraries required to build
  applications that use the QATzip APIs.


pkgId: 479cd5a2ee8a0e812f8de51886b21cc90aa94aa780c008c558ceccbabeec2e32
name: qdox
arch: noarch
version: 2.1.0
epoch: 0
release: 5.el10
summary: Extract class/interface/method definitions from sources
url: https://github.com/paul-hammant/qdox
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: qdox-2.1.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/qdox-2.1.0-5.el10.noarch.rpm
checksum_type: sha256
description:
  QDox is a high speed, small footprint parser
  for extracting class/interface/method definitions
  from source files complete with JavaDoc @tags.
  It is designed to be used by active code
  generators or documentation tools.


pkgId: 7c32ff83d6d3851b39784d480ab2219d8ea46cc750f11a59605dc003d025a2f5
name: qpdf
arch: x86_64
version: 11.8.0
epoch: 0
release: 4.el10
summary: Command-line tools and library for transforming PDF files
url: https://qpdf.sourceforge.io/
rpm_license: Apache-2.0 OR Artistic-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: qpdf-11.8.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/qpdf-11.8.0-4.el10.x86_64.rpm
checksum_type: sha256
description:
  QPDF is a command-line program that does structural, content-preserving
  transformations on PDF files. It could have been called something
  like pdf-to-pdf. It includes support for merging and splitting PDFs
  and to manipulate the list of pages in a PDF file. It is not a PDF viewer
  or a program capable of converting PDF into other formats.


pkgId: 76cad52741dcc14663ed5daf609e8914c33ccf7cf55ee43b79324cd28ea5c9cf
name: replacer
arch: noarch
version: 1.6
epoch: 0
release: 31.el10
summary: Replacer Maven Mojo
url: https://github.com/beiliubei/maven-replacer-plugin
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: replacer-1.6-31.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/replacer-1.6-31.el10.noarch.rpm
checksum_type: sha256
description:
  Maven plugin to replace tokens in a given file with a value.

  This plugin is also used to automatically generating PackageVersion.java
  in the FasterXML.com project.


pkgId: 98f5f935950cba033edf4c144c04f5e94c326de31d62c24f5175cf8c7a86bf9c
name: rpcsvc-proto-devel
arch: x86_64
version: 1.4
epoch: 0
release: 16.el10
summary: RPC protocol definitions
url: https://github.com/thkukuk/rpcsvc-proto
rpm_license: BSD and LGPLv2+
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: rpcsvc-proto-1.4-16.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rpcsvc-proto-devel-1.4-16.el10.x86_64.rpm
checksum_type: sha256
description:
  The rpcsvc-proto package includes several rpcsvc header files
  and RPC protocol definitions from SunRPC sources (as shipped with
  glibc).


pkgId: ec59264e9b3303221e0676bf3ed0532a3c65e3692a7f5314227e302ecaa2398f
name: rrdtool-devel
arch: x86_64
version: 1.8.0
epoch: 0
release: 19.el10
summary: RRDtool libraries and header files
url: https://oss.oetiker.ch/rrdtool/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: rrdtool-1.8.0-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rrdtool-devel-1.8.0-19.el10.x86_64.rpm
checksum_type: sha256
description:
  RRD is the Acronym for Round Robin Database. RRD is a system to store and
  display time-series data (i.e. network bandwidth, machine-room temperature,
  server load average). This package allow you to use directly this library.

rpm_license:
  gpl-1.0-or-later AND gpl-2.0-or-later AND gpl-2.0-or-later WITH rrdtool-floss-exception-2.0 AND mit AND lgpl-2.0-or-later AND lgpl-2.1-or-later AND bsd-source-code AND snprintf AND bsd-3-clause AND gpl-2.0-only AND licenseref-fedora-public-domain AND gtkbook


pkgId: b76949ffd42fd6bfdb57379a5ba4949f186be4df4890c58e8c74de4c98bbed64
name: rrdtool-doc
arch: x86_64
version: 1.8.0
epoch: 0
release: 19.el10
summary: RRDtool documentation
url: https://oss.oetiker.ch/rrdtool/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: rrdtool-1.8.0-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rrdtool-doc-1.8.0-19.el10.x86_64.rpm
checksum_type: sha256
description:
  RRD is the Acronym for Round Robin Database. RRD is a system to store and
  display time-series data (i.e. network bandwidth, machine-room temperature,
  server load average). This package contains documentation on using RRD.

rpm_license:
[cell repeats an earlier one in this file: 258 characters]


pkgId: 62c624d293595adebf4b76368be86cd01c40c7b0f091dcf7b463109e036675b0
name: ruby-doc
arch: noarch
version: 3.3.5
epoch: 0
release: 7.el10
summary: Documentation for ruby
description: This package contains documentation for ruby.
url: https://www.ruby-lang.org/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: ruby-3.3.5-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/ruby-doc-3.3.5-7.el10.noarch.rpm
checksum_type: sha256
rpm_license:
  (Ruby OR BSD-2-Clause) AND (Ruby OR BSD-2-Clause OR GPL-1.0-or-later) AND BSD-3-Clause AND (GPL-3.0-or-later WITH Bison-exception-2.2) AND ISC AND LicenseRef-Fedora-Public-Domain AND MIT AND CC0 AND zlib AND Unicode-DFS-2015 AND HPND-Markus-Kuhn AND Ruby-pty


pkgId: a3a526d22b7641eb86ad78bcfed5a77a3f07e04bec18ba7fb44f17891931792f
name: rubygem-diff-lcs
arch: noarch
version: 1.5.0
epoch: 0
release: 6.el10
summary: Provide a list of changes between two sequenced collections
url: https://github.com/halostatue/diff-lcs
rpm_license: MIT OR Artistic-2.0 OR GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: rubygem-diff-lcs-1.5.0-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rubygem-diff-lcs-1.5.0-6.el10.noarch.rpm
checksum_type: sha256
description:
  Diff::LCS computes the difference between two Enumerable sequences using the
  McIlroy-Hunt longest common subsequence (LCS) algorithm. It includes utilities
  to create a simple HTML diff output format and a standard diff-like tool.


pkgId: 7af46bf680233c2b71745028227e2e2a8bed449378afc7d4b23787609b890095
name: rubygem-rspec-expectations
arch: noarch
version: 3.13.0
epoch: 0
release: 2.el10
summary: RSpec expectations (should and matchers)
url: http://github.com/rspec/rspec-expectations
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: rubygem-rspec-expectations-3.13.0-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rubygem-rspec-expectations-3.13.0-2.el10.noarch.rpm
checksum_type: sha256
description:
  rspec-expectations adds `should` and `should_not` to every object and includes
  RSpec::Matchers, a library of standard matchers.


pkgId: 494f3d2c79f7df2e291a80b3b272cdbb7a0c0b5d0ede9a56ca89713570bb916b
name: rubygem-rspec-mocks
arch: noarch
version: 3.13.0
epoch: 0
release: 2.el10
summary: RSpec's 'test double' framework (mocks and stubs)
url: http://github.com/rspec/rspec-mocks
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: rubygem-rspec-mocks-3.13.0-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rubygem-rspec-mocks-3.13.0-2.el10.noarch.rpm
checksum_type: sha256
description:
  rspec-mocks provides a test-double framework for rspec including support
  for method stubs, fakes, and message expectations.


pkgId: e3fa6d8c2f1cbb411a321f4269bda6bb4047b2820398c1595331da2a05f2311c
name: rubygem-rspec-support
arch: noarch
version: 3.13.0
epoch: 0
release: 2.el10
summary: Common functionality to Rspec series
url: https://github.com/rspec/rspec-support
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: rubygem-rspec-support-3.13.0-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rubygem-rspec-support-3.13.0-2.el10.noarch.rpm
checksum_type: sha256
description:
  `RSpec::Support` provides common functionality to `RSpec::Core`,
  `RSpec::Expectations` and `RSpec::Mocks`. It is considered
  suitable for internal use only at this time.


pkgId: 5cccc0595607197a6d07a20f096025823a9472e1dc45cef126fc00e06ee1d9c2
name: rust-std-static-x86_64-unknown-none
arch: x86_64
version: 1.79.0
epoch: 0
release: 3.el10.alma.2
summary: Standard library for Rust x86_64-unknown-none
url: https://www.rust-lang.org
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: rust-1.79.0-3.el10.alma.2.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/rust-std-static-x86_64-unknown-none-1.79.0-3.el10.alma.2.x86_64.rpm
checksum_type: sha256
description:
  This package includes the standard libraries for building applications
  written in Rust for the embedded target x86_64-unknown-none.

rpm_license:
  (Apache-2.0 OR MIT) AND (Artistic-2.0 AND BSD-3-Clause AND ISC AND MIT AND MPL-2.0 AND Unicode-DFS-2016)


pkgId: ac6814aeb8e95d49e402b6a31453503b132b435a9e3bfb4d5c23b9a31a6cd922
name: samba-devel
arch: x86_64
version: 4.20.2
epoch: 0
release: 104.el10
summary: Developer tools for Samba libraries
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: samba-4.20.2-104.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/samba-devel-4.20.2-104.el10.x86_64.rpm
checksum_type: sha256
description:
  The samba-devel package contains the header files for the libraries
  needed to develop programs that link against the SMB, RPC and other
  libraries in the Samba suite.


pkgId: 6c24fcb0bef4fe4d14421498fa0755e87b6ca826d2625f2603d11d577975b671
name: samba-pidl
arch: noarch
version: 4.20.2
epoch: 0
release: 104.el10
summary: Perl IDL compiler
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: samba-4.20.2-104.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/samba-pidl-4.20.2-104.el10.noarch.rpm
checksum_type: sha256
description:
  The samba-pidl package contains the Perl IDL compiler used by Samba
  and Wireshark to parse IDL and similar protocols


pkgId: 6ecbd851580753bad2ca2ffc4fadf42a7c76233c6427810482877c59521f66b0
name: sanlock-devel
arch: x86_64
version: 3.9.4
epoch: 0
release: 2.el10
summary: Development files for sanlock
url: https://pagure.io/sanlock/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: sanlock-3.9.4-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sanlock-devel-3.9.4-2.el10.x86_64.rpm
checksum_type: sha256
description:
  The sanlock-devel package contains libraries and header files for
  developing applications that use sanlock.


pkgId: acc6cfc0e8da67c00ccd8d90f1d4f6c9a305f5e407997f93dd000e505dbbfc36
name: sblim-cmpi-devel
arch: x86_64
version: 2.0.3
epoch: 0
release: 32.el10
summary: SBLIM CMPI Provider Development Support
url: http://sblim.wiki.sourceforge.net/
rpm_license: EPL-1.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: sblim-cmpi-devel-2.0.3-32.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sblim-cmpi-devel-2.0.3-32.el10.x86_64.rpm
checksum_type: sha256
description:
  This packages provides the C and C++ CMPI header files needed by
  provider developers and can be used standalone. If used for
  C++ provider development it is also necessary to have
  tog-pegasus-devel installed.


pkgId: 8561f120602c2ca66d0d7b0e06ff388fbfba056f7c4a56fc9b42cdb688558423
name: sdl12-compat-devel
arch: x86_64
version: 1.2.68
epoch: 0
release: 3.el10
summary: Files to develop SDL 1.2 applications using SDL 2.0
url: https://github.com/libsdl-org/sdl12-compat
rpm_license: zlib and (Public Domain or MIT-0) and MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: sdl12-compat-1.2.68-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sdl12-compat-devel-1.2.68-3.el10.x86_64.rpm
checksum_type: sha256
description:
  Simple DirectMedia Layer (SDL) is a cross-platform multimedia library
  designed to provide fast access to the graphics frame buffer and audio device.

  This code is a compatibility layer; it provides a source-compatible API for
  programs written against SDL 1.2, but it uses SDL 2.0 behind the scenes.

  If you are writing new code, please target SDL 2.0 directly and do not use
  this layer.


pkgId: 494ac52fa1c80d4ff96c2b1145aff50ec9d0cd67809e48f644543f624703213e
name: sharutils
arch: x86_64
version: 4.15.2
epoch: 0
release: 27.el10
summary: The GNU shar utilities for packaging and unpackaging shell archives
url: http://www.gnu.org/software/sharutils/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: sharutils-4.15.2-27.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sharutils-4.15.2-27.el10.x86_64.rpm
checksum_type: sha256
description:
  The sharutils package contains the GNU shar utilities, a set of tools for
  encoding and decoding packages of files (in binary or text format) in
  a special plain text format called shell archives (shar).  This format can be
  sent through e-mail (which can be problematic for regular binary files).  The
  shar utility supports a wide range of capabilities (compressing, uuencoding,
  splitting long files for multi-part mailings, providing check-sums), which
  make it very flexible at creating shar files.  After the files have been sent,
  the unshar tool scans mail messages looking for shar files.  Unshar
  automatically strips off mail headers and introductory text and then unpacks
  the shar files.

rpm_license:
  GPL-3.0-or-later AND (GPL-3.0-or-later AND BSD-4-Clause) AND (LGPL-3.0-or-later OR BSD-3-Clause) AND LGPL-2.0-or-later AND LGPL-3.0-or-later AND LicenseRef-Fedora-Public-Domain AND GFDL-1.3-or-later


pkgId: 6183017069751b8fd80d40c6cf47b1a7de804fe485ed80c3afdb50058ebf944d
name: sil-nuosu-fonts
arch: noarch
version: 2.200
epoch: 0
release: 11.el10
summary: The Nuosu SIL Font
url: http://scripts.sil.org/SILYi_home
rpm_license: OFL-1.1-RFN
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: sil-nuosu-fonts-2.200-11.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sil-nuosu-fonts-2.200-11.el10.noarch.rpm
checksum_type: sha256
description:
  The Nuosu SIL Font is a single Unicode font for the standardized Yi script used
  by a large ethnic group in southwestern China.


pkgId: 2ee811e66001ac2177d44e65f99303e9c94c78639e906d7fddbe084a02c7eefc
name: sisu-mojos
arch: noarch
version: 0.9.0~M2
epoch: 0
release: 4.el10
summary: Sisu plugin for Apache Maven
url: https://www.eclipse.org/sisu
rpm_license: EPL-1.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: sisu-mojos-0.9.0~M2-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sisu-mojos-0.9.0~M2-4.el10.noarch.rpm
checksum_type: sha256
description:
  The Sisu Plugin for Maven provides mojos to generate
  META-INF/sisu/javax.inject.Named index files for the Sisu container.


pkgId: 0ccc180206fdf393eac85f3679c9d85d16196eb48d7d21692ebada58d2a9e53f
name: socket_wrapper
arch: x86_64
version: 1.4.0
epoch: 0
release: 5.el10
summary: A library passing all socket communications through Unix sockets
url: http://cwrap.org/
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: socket_wrapper-1.4.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/socket_wrapper-1.4.0-5.el10.x86_64.rpm
checksum_type: sha256
description:
  socket_wrapper aims to help client/server software development teams willing to
  gain full functional test coverage. It makes it possible to run several
  instances of the full software stack on the same machine and perform locally
  functional testing of complex network configurations.

  To use it set the following environment variables:

  LD_PRELOAD=libsocket_wrapper.so
  SOCKET_WRAPPER_DIR=/path/to/swrap_dir

  This package doesn't have a devel package because this project is for
  development/testing.


pkgId: a923d6382417496916bdf9b40e5348cabbb82494e3882e1fefc6c115fffa389a
name: sombok-devel
arch: x86_64
version: 2.4.0
epoch: 0
release: 22.el10
summary: Development files for sombok
url: http://sf.net/projects/linefold/
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND (GPL-2.0-or-later OR Artistic-1.0-Perl)
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: sombok-2.4.0-22.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sombok-devel-2.4.0-22.el10.x86_64.rpm
checksum_type: sha256
description:
  The sombok-devel package contains libraries and header files for
  developing applications that use sombok.


pkgId: abb31061771bf9db4070d5b75297bcd66c5ce5377193a36a9c595aeaa92f9f7e
name: source-highlight-devel
arch: x86_64
version: 3.1.9
epoch: 0
release: 24.el10
summary: Development files for source-highlight
description: Development files for source-highlight
url: http://www.gnu.org/software/src-highlite/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: source-highlight-3.1.9-24.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/source-highlight-devel-3.1.9-24.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  GPL-3.0-or-later AND GFDL-1.1-or-later AND LicenseRef-Fedora-Public-Domain AND GPL-2.0-only AND GPL-3.0-only AND GPL-3.0-or-later WITH Bison-exception-2.2


pkgId: 81622fa3c8186513f94a9c683959647b24ec8d83141681ed2da1c579ad0df2f0
name: speech-dispatcher-devel
arch: x86_64
version: 0.11.5
epoch: 0
release: 7.el10
summary: Development files for speech-dispatcher
url: http://devel.freebsoft.org/speechd
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: speech-dispatcher-0.11.5-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/speech-dispatcher-devel-0.11.5-7.el10.x86_64.rpm
checksum_type: sha256
description:
  The speech-dispatcher-devel package contains libraries and header files for
  developing applications that use speech-dispatcher.


pkgId: 8d7d4b885bf8f7b9ca8b27658b7a5193954ad30d60390a6a9569f6695bb91ad4
name: speex-devel
arch: x86_64
version: 1.2.0
epoch: 0
release: 18.el10
summary: Development package for speex
url: https://www.speex.org/
rpm_license: BSD-3-clause AND TU-Berlin-1.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: speex-1.2.0-18.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/speex-devel-1.2.0-18.el10.x86_64.rpm
checksum_type: sha256
description:
  Speex is a patent-free compression format designed especially for
  speech. This package contains development files for speex


pkgId: f5ac14e0330a9ac3647f62e541ba0fcd1360e3461453789d299b3fb47ac08bc7
name: speexdsp-devel
arch: x86_64
version: 1.2.1
epoch: 0
release: 7.el10
summary: Development package for speexdsp
url: http://www.speex.org/
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: speexdsp-1.2.1-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/speexdsp-devel-1.2.1-7.el10.x86_64.rpm
checksum_type: sha256
description:
  Speex is a patent-free compression format designed especially for
  speech. This package contains development files for speexdsp

  This is the DSP package, see the speex package for the codec part.


pkgId: 7e23cdafa80ac6990c72d8b276c512d6b1eb017ec143fb72fbc95644dc8825db
name: supermin-devel
arch: x86_64
version: 5.3.4
epoch: 0
release: 5.el10.alma.1
summary: Development tools for supermin
url: http://people.redhat.com/~rjones/supermin/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: supermin-5.3.4-5.el10.alma.1.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/supermin-devel-5.3.4-5.el10.alma.1.x86_64.rpm
checksum_type: sha256
description:
  supermin-devel contains development tools for supermin.

  It contains extra dependencies needed for 'supermin --prepare' to
  work, as well as tools for automatic RPM dependency generation from
  supermin appliances.


pkgId: bd50e9e30ee014d0fd38722517a1fffd49230d97b276b68b3e60640f61a8d536
name: swig
arch: x86_64
version: 4.2.1
epoch: 0
release: 1.el10
summary: Connects C/C++/Objective C to some high-level programming languages
url: https://www.swig.org/
rpm_license: GPL-3.0-or-later AND BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: swig-4.2.1-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/swig-4.2.1-1.el10.x86_64.rpm
checksum_type: sha256
description:
  Simplified Wrapper and Interface Generator (SWIG) is a software
  development tool for connecting C, C++ and Objective C programs with a
  variety of high-level programming languages. SWIG is used with different
  types of target languages including common scripting languages such as
  Javascript, Perl, PHP, Python, Tcl and Ruby. The list of supported
  languages also includes non-scripting languages such as C#, D, Go language,
  Java including Android, Lua, OCaml, Octave, Scilab and R. Also several
  interpreted and compiled Scheme implementations (Guile, MzScheme/Racket)
  are supported. SWIG is most commonly used to create high-level interpreted
  or compiled programming environments, user interfaces, and as a tool for
  testing and prototyping C/C++ software.


pkgId: 60f3b7a179ce43ef09a4269deea51fe3d7d1a5b3a77922923088beca2b4b765e
name: sysprof-devel
arch: x86_64
version: 46.0
epoch: 0
release: 3.el10
summary: Development files for sysprof
url: http://www.sysprof.com
rpm_license: GPL-2.0-or-later AND GPL-3.0-or-later AND CC-BY-SA-4.0 AND BSD-2-Clause-Patent
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: sysprof-46.0-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/sysprof-devel-46.0-3.el10.x86_64.rpm
checksum_type: sha256
description:
  The sysprof-devel package contains libraries and header files for
  developing applications that use sysprof.


pkgId: 9095bd247802a923e462db19813b85cd561d4116f8ac99ccec8a0354f0b835f5
name: testng
arch: noarch
version: 7.8.0
epoch: 0
release: 5.el10
summary: Java-based testing framework
url: https://testng.org/doc/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: testng-7.8.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/testng-7.8.0-5.el10.noarch.rpm
checksum_type: sha256
description:
  TestNG is a testing framework inspired from JUnit and NUnit but introducing
  some new functionality, including flexible test configuration, and
  distributed test running.  It is designed to cover unit tests as well as
  functional, end-to-end, integration, etc.


pkgId: 2ff707d66b7d3fcb1c5beac936ad388e24963972dcec890f84fe9a2092bf2dd4
name: texi2html
arch: noarch
version: 5.0
epoch: 0
release: 23.el10
summary: A highly customizable texinfo to HTML and other formats translator
url: http://www.nongnu.org/texi2html/
rpm_license: GPL-2.0-or-later AND LicenseRef-OFSFDL AND (CC-BY-SA-3.0 OR GPL-2.0-only)
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: texi2html-5.0-23.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/texi2html-5.0-23.el10.noarch.rpm
checksum_type: sha256
description:
  The basic purpose of texi2html is to convert Texinfo documents into HTML,
  and other formats.  Configuration files written in perl provide fine degree
  of control over the final output, allowing most every aspect of the final
  output not specified in the Texinfo input file to be specified.


pkgId: cff0669488de8f04f080d3d893957213d8d2a1d5b4e329d98735ecfe5a6349cf
name: texinfo
arch: x86_64
version: 7.1
epoch: 0
release: 4.el10
summary: Tools needed to create Texinfo format documentation files
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: texinfo-7.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/texinfo-7.1-4.el10.x86_64.rpm
checksum_type: sha256
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  Install texinfo if you want a documentation system for producing both
  online and print documentation from the same source file and/or if you
  are going to write documentation for the GNU Project.


pkgId: 3288e08a577dd58b2a7bbf847f8b4b6989fda945cf4948117364e1c743198a85
name: texinfo-tex
arch: x86_64
version: 7.1
epoch: 0
release: 4.el10
summary: Tools for formatting Texinfo documentation files using TeX
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: texinfo-7.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/texinfo-tex-7.1-4.el10.x86_64.rpm
checksum_type: sha256
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  The texinfo-tex package provides tools to format Texinfo documents
  for printing using TeX.


pkgId: 7f4aaf04946518233d8250706a1e2c68de25fad758d425a16a55c6fd17e4fc19
name: texlive-gnu-freefont
arch: noarch
version: 20230311
epoch: 12
release: 19.el10
summary: A Unicode font, with rather wide coverage
url: http://tug.org/texlive/
rpm_license: GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Applications/Publishing
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: texlive-20230311-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/texlive-gnu-freefont-20230311-19.el10.noarch.rpm
checksum_type: sha256
description:
  The package provides a set of outline (i.e. OpenType) fonts
  covering as much as possible of the Unicode character set. The
  set consists of three typefaces: one monospaced and two
  proportional (one with uniform and one with modulated stroke).


pkgId: c5a0549524deab93492a9dbac8b46fd85e0cd2d648dd8d41a13ac29456d7240d
name: texlive-lib-devel
arch: x86_64
version: 20230311
epoch: 12
release: 19.el10
summary: Development files for TeX specific shared libraries
description: Development files for TeX specific shared libraries.
url: http://tug.org/texlive/
rpm_vendor: AlmaLinux
rpm_group: Applications/Publishing
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: texlive-20230311-19.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/texlive-lib-devel-20230311-19.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  Apache-2.0 AND Artistic-2.0 AND BSD-3-Clause AND GFDL-1.1-or-later AND GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-3.0-only AND GPL-3.0-or-later AND Knuth-CTAN AND LGPL-2.1-or-later AND LGPL-3.0-or-later AND LPPL-1.3a+ AND LPPL-1.3c AND MIT AND OFL-1.1 AND LicenseRef-Fedora-Public-Domain


pkgId: 179102ce072276640f400d6a71e732143c735bc727a319c60940225bcdd6f72d
name: tinycdb-devel
arch: x86_64
version: 0.80
epoch: 0
release: 3.el10
summary: Development files for tinycdb
url: http://www.corpit.ru/mjt/tinycdb.html
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tinycdb-0.80-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tinycdb-devel-0.80-3.el10.x86_64.rpm
checksum_type: sha256
description:
  tinycdb is a small, fast and reliable utility set and subroutine
  library for creating and reading constant databases.

  This package contains tinycdb development library and header file for
  developing applications that use tinycdb.


pkgId: 18e08b9f1f38351ba0968ef3056cf18ae4027f880fe6b47ac4def7715b458938
name: tix
arch: x86_64
version: 8.4.3
epoch: 1
release: 41.el10
summary: A set of extension widgets for Tk
url: http://tix.sourceforge.net/
rpm_license: TCL
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tix-8.4.3-41.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tix-8.4.3-41.el10.x86_64.rpm
checksum_type: sha256
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.


pkgId: ac1e1b91994be13036e67fe61dca0e5be1557434781747a0b80a5f5bd23adf21
name: tix-devel
arch: x86_64
version: 8.4.3
epoch: 1
release: 41.el10
summary: Tk Interface eXtension development files
url: http://tix.sourceforge.net/
rpm_license: TCL
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tix-8.4.3-41.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tix-devel-8.4.3-41.el10.x86_64.rpm
checksum_type: sha256
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.

  This package contains the tix development files needed for building
  tix applications.


pkgId: 1b460676c22d2aff7f01764d123ef2af835675f1a7f49f9a81326b4c771c51c9
name: tog-pegasus-devel
arch: x86_64
version: 2.14.1
epoch: 2
release: 74.el10
summary: The OpenPegasus Software Development Kit
url: http://www.openpegasus.org
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tog-pegasus-2.14.1-74.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tog-pegasus-devel-2.14.1-74.el10.x86_64.rpm
checksum_type: sha256
description:
  The OpenPegasus WBEM Services for Linux SDK is the developer's kit for the
  OpenPegasus WBEM Services for Linux release. It provides Linux C++ developers
  with the WBEM files required to build WBEM Clients and Providers. It also
  supports C provider developers via the CMPI interface.


pkgId: e1a3fd978c1c18f5b2518beb0cb0241e9bc11b42e23f61e38cddfd28118b0d35
name: tpm2-abrmd-devel
arch: x86_64
version: 3.0.0
epoch: 0
release: 6.el10
summary: Headers, static libraries and package config files of tpm2-abrmd
url: https://github.com/tpm2-software/tpm2-abrmd
rpm_license: BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tpm2-abrmd-3.0.0-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tpm2-abrmd-devel-3.0.0-6.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains headers, static libraries and package config files
  required to build applications that use tpm2-abrmd.


pkgId: ebf0445b7a74337d2e7436be0e6c0aac299dd8ed335c78e182b52db52fe44c0c
name: tracker-devel
arch: x86_64
version: 3.7.3
epoch: 0
release: 3.el10
summary: Development files for tracker
url: https://gnome.pages.gitlab.gnome.org/tracker/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: tracker-3.7.3-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tracker-devel-3.7.3-3.el10.x86_64.rpm
checksum_type: sha256
description:
  The tracker-devel package contains libraries and header files for
  developing applications that use tracker.


pkgId: ef22dd73a9b3e5d7455359a379f14d52537363d17417dd11d9800891fe7e3b58
name: tss2-devel
arch: x86_64
version: 2.1.1
epoch: 1
release: 4.el10
summary: Development libraries and headers for IBM's TSS 2.0
url: http://sourceforge.net/projects/ibmtpm20tss/
rpm_license: BSD-3-Clause AND LicenseRef-TCGL
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: tss2-2.1.1-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/tss2-devel-2.1.1-4.el10.x86_64.rpm
checksum_type: sha256
description:
  Development libraries and headers for IBM's TSS 2.0. You will need this in
  order to build TSS 2.0 applications.


pkgId: 632c0f73d46bc60de1c3d116d66d09116dc801b2d4d87e0fe146bfbbf8a2f828
name: turbojpeg-devel
arch: x86_64
version: 3.0.2
epoch: 0
release: 3.el10
summary: Headers for the TurboJPEG library
url: https://github.com/libjpeg-turbo/libjpeg-turbo
rpm_license: Zlib AND BSD-3-Clause AND MIT AND IJG
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: libjpeg-turbo-3.0.2-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/turbojpeg-devel-3.0.2-3.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files necessary for developing programs which will
  manipulate JPEG files using the TurboJPEG library.


pkgId: 9aaf8906206399d752075c76ecaa94554c2f885a3690aad739753017cdd58dbd
name: twolame-devel
arch: x86_64
version: 0.4.0
epoch: 0
release: 5.el10
summary: Development tools for TwoLAME applications
url: http://www.twolame.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: twolame-0.4.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/twolame-devel-0.4.0-5.el10.x86_64.rpm
checksum_type: sha256
description:
  This package contains the header files and documentation needed to develop
  applications with TwoLAME.


pkgId: 38296f8f12b975fa98d7b416e53e8b773d105df787b93dd6f241c587d2c50ba3
name: uchardet
arch: x86_64
version: 0.0.8
epoch: 0
release: 6.el10
summary: An encoding detector library ported from Mozilla
url: https://www.freedesktop.org/wiki/Software/uchardet
rpm_license: MPL-1.1 OR GPL-2.0-or-later OR LGPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: uchardet-0.0.8-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/uchardet-0.0.8-6.el10.x86_64.rpm
checksum_type: sha256
description:
  Uchardet is a C language binding of the original C++ implementation of the
  universal charset detection library by Mozilla. Uchardet is an encoding
  detector library, which takes a sequence of bytes in an unknown character
  encoding without any additional information, and attempts to determine the
  encoding of the text.


pkgId: e042cb005a0c57509cbfce15ae6d7f7dac7a6a7f347264544f12a4d180d1e8e0
name: uid_wrapper
arch: x86_64
version: 1.3.0
epoch: 0
release: 7.el10
summary: A wrapper for privilege separation
url: http://cwrap.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: uid_wrapper-1.3.0-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/uid_wrapper-1.3.0-7.el10.x86_64.rpm
checksum_type: sha256
description:
  Some projects like a file server need privilege separation to be able to switch
  to the connection user and do file operations. uid_wrapper convincingly lies
  to the application letting it believe it is operating as root and even
  switching between UIDs and GIDs as needed.

  To use it set the following environment variables:

  LD_PRELOAD=libuid_wrapper.so
  UID_WRAPPER=1

  This package doesn't have a devel package cause this project is for
  development/testing.


pkgId: 1889d6df031744151c65979d861ba86c0c0cff79d332cc6a279aaf8f35d2401e
name: unicode-ucd-unihan
arch: noarch
version: 15.1.0
epoch: 0
release: 4.el10
summary: Unicode Han Database
url: http://www.unicode.org/ucd/
rpm_license: Unicode-3.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: unicode-ucd-15.1.0-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/unicode-ucd-unihan-15.1.0-4.el10.noarch.rpm
checksum_type: sha256
description:
  This package contains Unihan.zip which contains the data files for the Unified
  Han database of Hanzi/Kanji/Hanja Chinese characters.


pkgId: 629b57e8525ace86e50dde9bcdba2937dcdadc5661599178a722cde9322c1583
name: unixODBC-devel
arch: x86_64
version: 2.3.12
epoch: 0
release: 5.el10
summary: Development files for programs which will use the unixODBC library
url: http://www.unixODBC.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: unixODBC-2.3.12-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/unixODBC-devel-2.3.12-5.el10.x86_64.rpm
checksum_type: sha256
description:
  The unixODBC package can be used to access databases through ODBC
  drivers. If you want to develop programs that will access data through
  ODBC, you need to install this package.


pkgId: c09f53e5936506064d558e66a885b05fa42e8ac774dee11ff823ba5d8d0add5d
name: urw-base35-fonts-devel
arch: noarch
version: 20200910
epoch: 0
release: 20.el10
summary: RPM macros related to (URW)++ Level 2 Core Font Set
url: https://www.urwpp.de/en/
rpm_license: AGPL-3.0-only AND GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: urw-base35-fonts-20200910-20.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/urw-base35-fonts-devel-20200910-20.el10.noarch.rpm
checksum_type: sha256
description:
  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. These fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.

  This package is useful for development purposes only. It installs RPM
  macros useful for building packages against urw-base35-fonts,
  as well as all the fonts contained in this font set.


pkgId: 18801444b44fb2e314b49be8247fbe75058ab511b4e7049446321811053e73aa
name: usbredir-devel
arch: x86_64
version: 0.13.0
epoch: 0
release: 5.el10
summary: Development files for usbredir
url: https://www.spice-space.org/usbredir.html
rpm_license: LGPL-2.1-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: usbredir-0.13.0-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/usbredir-devel-0.13.0-5.el10.x86_64.rpm
checksum_type: sha256
description:
  The usbredir-devel package contains libraries and header files for
  developing applications that use usbredir.


pkgId: fd32d7b96c5682eb9baacd7f003889582cc66795b5f963b1dfdee7e44fc86e07
name: utf8proc-devel
arch: x86_64
version: 2.7.0
epoch: 0
release: 8.el10
summary: Header files, libraries and development documentation for utf8proc
url: http://julialang.org/utf8proc/
rpm_license: MIT AND Unicode-DFS-2015
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: utf8proc-2.7.0-8.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/utf8proc-devel-2.7.0-8.el10.x86_64.rpm
checksum_type: sha256
description:
  Contains header files for developing applications that use the utf8proc
  library.

  The documentation for the C library is found in the utf8proc.h header file.
  "utf8proc_map" is most likely the function you will be using for mapping UTF-8
  strings, unless you want to allocate memory yourself.


pkgId: 3c590da0a798ea541e092711d6e107fbfb47588fb8d5abd1f06413a0373e34fc
name: vala
arch: x86_64
version: 0.56.17
epoch: 0
release: 3.el10
summary: A modern programming language for GNOME
url: https://wiki.gnome.org/Projects/Vala
rpm_license: LGPL-2.1-or-later AND BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: vala-0.56.17-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/vala-0.56.17-3.el10.x86_64.rpm
checksum_type: sha256
description:
  Vala is a new programming language that aims to bring modern programming
  language features to GNOME developers without imposing any additional
  runtime requirements and without using a different ABI compared to
  applications and libraries written in C.

  valac, the Vala compiler, is a self-hosting compiler that translates
  Vala source code into C source and header files. It uses the GObject
  type system to create classes and interfaces declared in the Vala source
  code. It's also planned to generate GIDL files when gobject-
  introspection is ready.

  The syntax of Vala is similar to C#, modified to better fit the GObject
  type system.


pkgId: 00c12947d20a30e14f1f19e41fd4deae209ee41936a5a88409e4df6d08b11eeb
name: vala-doc
arch: noarch
version: 0.56.17
epoch: 0
release: 3.el10
summary: Documentation for vala
url: https://wiki.gnome.org/Projects/Vala
rpm_license: LGPL-2.1-or-later AND BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: vala-0.56.17-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/vala-doc-0.56.17-3.el10.noarch.rpm
checksum_type: sha256
description:
  Vala is a new programming language that aims to bring modern programming
  language features to GNOME developers without imposing any additional
  runtime requirements and without using a different ABI compared to
  applications and libraries written in C.

  This package contains documentation in a devhelp HTML book.


pkgId: b62c0a34322fd4b6fff0102ee7396363392454f54f21812c73f950483ce12a20
name: valadoc-devel
arch: x86_64
version: 0.56.17
epoch: 0
release: 3.el10
summary: Development files for valadoc
url: https://wiki.gnome.org/Projects/Vala
rpm_license: LGPL-2.1-or-later AND BSD-2-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: vala-0.56.17-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/valadoc-devel-0.56.17-3.el10.x86_64.rpm
checksum_type: sha256
description:
  Valadoc is a documentation generator for generating API documentation from Vala
  source code.

  The valadoc-devel package contains libraries and header files for
  developing applications that use valadoc.


pkgId: a3bdcf4562363f655fcb576bc9442fe4c4b7dfc55b316f915852ad7654876379
name: varnish-devel
arch: x86_64
version: 7.4.2
epoch: 0
release: 4.el10
summary: Development files for varnish
description:
  Development files for varnish
  Varnish Cache is a high-performance HTTP accelerator

url: https://www.varnish-cache.org/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: varnish-7.4.2-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/varnish-devel-7.4.2-4.el10.x86_64.rpm
checksum_type: sha256
rpm_license:
  BSD-2-Clause AND (BSD-2-Clause-FreeBSD AND BSD-3-Clause AND LicenseRef-Fedora-Public-Domain AND Zlib)


pkgId: 6aeaea5b1fb62ec999eba6d3a831c6384ccb377c8ac5bc497fcc1f0c10f9cf4c
name: velocity
arch: noarch
version: 2.3
epoch: 0
release: 5.el10
summary: Java-based template engine
url: http://velocity.apache.org/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: velocity-2.3-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/velocity-2.3-5.el10.noarch.rpm
checksum_type: sha256
description:
  Velocity is a Java-based template engine. It permits anyone to use the
  simple yet powerful template language to reference objects defined in
  Java code.
  When Velocity is used for web development, Web designers can work in
  parallel with Java programmers to develop web sites according to the
  Model-View-Controller (MVC) model, meaning that web page designers can
  focus solely on creating a site that looks good, and programmers can
  focus solely on writing top-notch code. Velocity separates Java code
  from the web pages, making the web site more maintainable over the long
  run and providing a viable alternative to Java Server Pages (JSPs) or
  PHP.
  Velocity's capabilities reach well beyond the realm of web sites; for
  example, it can generate SQL and PostScript and XML (see Anakia for more
  information on XML transformations) from templates. It can be used
  either as a standalone utility for generating source code and reports,
  or as an integrated component of other systems. Velocity also provides
  template services for the Turbine web application framework.
  Velocity+Turbine provides a template service that will allow web
  applications to be developed according to a true MVC model.


pkgId: 2fdd870278528196682c62c9023828180b1171d79ec6e6aad4c88a016312f615
name: virt-manager
arch: noarch
version: 5.0.0
epoch: 0
release: 1.el10
summary: Desktop tool for managing virtual machines via libvirt
url: https://virt-manager.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: virt-manager-5.0.0-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/virt-manager-5.0.0-1.el10.noarch.rpm
checksum_type: sha256
description:
  Virtual Machine Manager provides a graphical tool for administering virtual
  machines for KVM, Xen, and LXC. Start, stop, add or remove virtual devices,
  connect to a graphical or serial console, and see resource usage statistics
  for existing VMs on local or remote machines. Uses libvirt as the backend
  management API.


pkgId: 69680d1c1649d789fbbad25ba2549087c21b779e8cab6a5e287e0116b3d24c19
name: volume_key-devel
arch: x86_64
version: 0.3.12
epoch: 0
release: 22.el10
summary: A library for manipulating storage encryption keys and passphrases
url: https://pagure.io/volume_key/
rpm_license: GPL-2.0-only AND (MPL-1.1 OR GPL-2.0-or-later OR LGPL-2.1-or-later)
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: volume_key-0.3.12-22.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/volume_key-devel-0.3.12-22.el10.x86_64.rpm
checksum_type: sha256
description:
  This package provides libvolume_key, a library for manipulating storage volume
  encryption keys and storing them separately from volumes.

  The main goal of the software is to allow restoring access to an encrypted
  hard drive if the primary user forgets the passphrase.  The encryption key
  back up can also be useful for extracting data after a hardware or software
  failure that corrupts the header of the encrypted volume, or to access the
  company data after an employee leaves abruptly.


pkgId: 2adaa40c2441588b38eeb32da9011cb1ce4ca7f2348709deb3255d2dfaea823a
name: vte291-devel
arch: x86_64
version: 0.76.3
epoch: 0
release: 2.el10
summary: Development files for GTK+ 3 vte291
url: https://wiki.gnome.org/Apps/Terminal/VTE
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: vte291-0.76.3-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/vte291-devel-0.76.3-2.el10.x86_64.rpm
checksum_type: sha256
description:
  The vte291-devel package contains libraries and header files for
  developing GTK+ 3 applications that use vte291.


pkgId: 4e814dc4292d80b78c5d9ac0027bf3e433fc04043930583b25eb52ecc93640ff
name: vte291-gtk4-devel
arch: x86_64
version: 0.76.3
epoch: 0
release: 2.el10
summary: Development files for GTK 4 vte291
url: https://wiki.gnome.org/Apps/Terminal/VTE
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: vte291-0.76.3-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/vte291-gtk4-devel-0.76.3-2.el10.x86_64.rpm
checksum_type: sha256
description:
  The vte291-gtk4-devel package contains libraries and header files for
  developing GTK 4 applications that use vte291.


pkgId: 2106d38d92e704c55ba860b397d339620e0fd562597ad570821578f00eaef65b
name: webrtc-audio-processing-devel
arch: x86_64
version: 1.3
epoch: 0
release: 5.el10
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: webrtc-audio-processing-1.3-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/webrtc-audio-processing-devel-1.3-5.el10.x86_64.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: 128dfa9899ccfb758e68ec2cdb6e7f71f08661b72c002846653ec122dca1a270
name: wireshark-devel
arch: x86_64
version: 4.2.6
epoch: 1
release: 2.el10
summary: Development headers and libraries for wireshark
url: http://www.wireshark.org/
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: wireshark-4.2.6-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/wireshark-devel-4.2.6-2.el10.x86_64.rpm
checksum_type: sha256
description:
  The wireshark-devel package contains the header files, developer
  documentation, and libraries required for development of wireshark scripts
  and plugins.

rpm_license:
  BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause AND MIT AND GPL-2.0-or-later AND LGPL-2.0-or-later AND Zlib AND ISC AND (BSD-3-Clause OR GPL-2.0-only) AND (GPL-2.0-or-later AND Zlib)


pkgId: af71bf2c3374e4d5b49726bee93a0d2001b95f4d75d7bd11ce263ef138930329
name: xalan-j2-xsltc
arch: noarch
version: 2.7.3
epoch: 0
release: 5.el10
summary: XSLT compiler
url: http://xalan.apache.org/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: xalan-j2-2.7.3-5.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xalan-j2-xsltc-2.7.3-5.el10.noarch.rpm
checksum_type: sha256
description:
  The XSLT Compiler is a Java-based tool for compiling XSLT stylesheets into
  lightweight and portable Java byte codes called translets.


pkgId: 0a71d55a9eaea0df9bfec862bf60a9cf297ed040f8e7af50ab8cd64f6dbd9553
name: xapian-core-devel
arch: x86_64
version: 1.4.23
epoch: 0
release: 3.el10
summary: Files needed for building packages which use Xapian
url: https://www.xapian.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: xapian-core-1.4.23-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xapian-core-devel-1.4.23-3.el10.x86_64.rpm
checksum_type: sha256
description:
  Xapian is an Open Source Probabilistic Information Retrieval framework. It
  offers a highly adaptable toolkit that allows developers to easily add advanced
  indexing and search facilities to applications. This package provides the
  files needed for building packages which use Xapian


pkgId: 9250d81b369da4bb16a5cf692ef3d20668d550354464dfb4f58be6c87695a844
name: xcb-proto
arch: noarch
version: 1.17.0
epoch: 0
release: 2.el10
summary: XCB protocol descriptions
url: https://xcb.freedesktop.org/
rpm_license: X11-distribute-modifications-variant
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: xcb-proto-1.17.0-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xcb-proto-1.17.0-2.el10.noarch.rpm
checksum_type: sha256
description:
  XCB is a project to enable efficient language bindings to the X11 protocol.
  This package contains the protocol descriptions themselves.  Language
  bindings use these protocol descriptions to generate code for marshalling
  the protocol.


pkgId: e36f732d04dacd1fbdd418feb20605d653a44ac76c35a8c0855eadf4c1cf0b09
name: xmlsec1-devel
arch: x86_64
version: 1.2.39
epoch: 1
release: 2.el10
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: xmlsec1-1.2.39-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmlsec1-devel-1.2.39-2.el10.x86_64.rpm
checksum_type: sha256
summary:
  Libraries, includes, etc. to develop applications with XML Digital Signatures and XML Encryption support.

description:
  Libraries, includes, etc. you can use to develop applications with XML Digital
  Signatures and XML Encryption support.


pkgId: 7fbfd0b1aa48e1b484e5b764eb3bd0c1eb2820bf2ac0098ea4f155237ce0a241
name: xmltoman
arch: noarch
version: 0.4
epoch: 0
release: 31.el10
summary: Scripts for converting XML to roff or HTML
url: http://sourceforge.net/projects/xmltoman/
rpm_license: GPL-2.0-or-later
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xmltoman-0.4-31.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmltoman-0.4-31.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides xmltoman and xmlmantohtml scripts, to compile
  the xml representation of manual page to either roff source, or HTML
  (while providing the CSS stylesheet for eye-candy look). XSL stylesheet
  for doing rougly the same job is provided.


pkgId: 1b2373a36dcc77a3454ba8de6d4c11eb7968bfdec4c1dca1cfa75e760567aa3a
name: xmlunit
arch: noarch
version: 2.9.0
epoch: 0
release: 10.el10
summary: Provides classes to do asserts on xml
url: https://www.xmlunit.org/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder01.almalinux.org
rpm_sourcerpm: xmlunit-2.9.0-10.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmlunit-2.9.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  XMLUnit provides you with the tools to verify the XML you emit is the one you
  want to create. It provides helpers to validate against an XML Schema, assert
  the values of XPath queries or compare XML documents against expected outcomes.


pkgId: 9968ba45166afaac172200a1044adf5aa9e247c90ecfbb603df4bcde3ec7f75c
name: xmvn
arch: noarch
version: 4.2.0
epoch: 0
release: 12.el10
summary: Local Extensions for Apache Maven
url: https://fedora-java.github.io/xmvn/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xmvn-4.2.0-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmvn-4.2.0-12.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides extensions for Apache Maven that can be used to
  manage system artifact repository and use it to resolve Maven
  artifacts in offline mode, as well as Maven plugins to help with
  creating RPM packages containing Maven artifacts.


pkgId: 0699b8fb81c289cbdaadd25d2bb8bdbb4488ab8c97dc4fd6b32b2a6d37d601d7
name: xmvn-core
arch: noarch
version: 4.2.0
epoch: 0
release: 12.el10
summary: XMvn library
url: https://fedora-java.github.io/xmvn/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xmvn-4.2.0-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmvn-core-4.2.0-12.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides XMvn API and XMvn Core modules, which implement
  the essential functionality of XMvn such as resolution of artifacts
  from system repository.


pkgId: 40fd4a2c5b601a0dd0675f4a282954976b8073476403feb136f0faaafe6d6576
name: xmvn-generator
arch: x86_64
version: 1.2.2
epoch: 0
release: 4.el10
summary: RPM dependency generator for Java
url: https://github.com/fedora-java/xmvn-generator
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: xmvn-generator-1.2.2-4.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmvn-generator-1.2.2-4.el10.x86_64.rpm
checksum_type: sha256
description:
  XMvn Generator is a dependency generator for RPM Package Manager
  written in Java and Lua, that uses LuJavRite library to call Java code
  from Lua.


pkgId: 4496943b48f22f10bacae762e61d9e227568d0e30e4106de887d00fe8d78441b
name: xmvn-mojo
arch: noarch
version: 4.2.0
epoch: 0
release: 12.el10
summary: XMvn MOJO
url: https://fedora-java.github.io/xmvn/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xmvn-4.2.0-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmvn-mojo-4.2.0-12.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides XMvn MOJO, which is a Maven plugin that consists
  of several MOJOs.  Some goals of these MOJOs are intended to be
  attached to default Maven lifecycle when building packages, others can
  be called directly from Maven command line.


pkgId: ee9d51ac78114ab6d211778b9912154c66c77d445a4f120df24a2dee85b90399
name: xmvn-tools
arch: noarch
version: 4.2.0
epoch: 0
release: 12.el10
summary: XMvn tools
url: https://fedora-java.github.io/xmvn/
rpm_license: Apache-2.0
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xmvn-4.2.0-12.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xmvn-tools-4.2.0-12.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides various XMvn tools:
  * XMvn Install, which is a command-line interface to XMvn installer.
    The installer reads reactor metadata and performs artifact
    installation according to specified configuration.
  * XMvn Resolver, which is a very simple commald-line tool to resolve
    Maven artifacts from system repositories.  Basically it's just an
    interface to artifact resolution mechanism implemented by XMvn Core.
    The primary intended use case of XMvn Resolver is debugging local
    artifact repositories.
  * XMvn Subst, which is a tool that can substitute Maven artifact files
    with symbolic links to corresponding files in artifact repository.


pkgId: b909a25cf901f3ca5d08ee9ec5df02fa0593f97a16bde2bc827222f8bde6df5a
name: xorg-x11-server-Xwayland-devel
arch: x86_64
version: 24.1.1
epoch: 0
release: 1.el10
summary: Development package
url: http://www.x.org
rpm_license: MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: xorg-x11-server-Xwayland-24.1.1-1.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xorg-x11-server-Xwayland-devel-24.1.1-1.el10.x86_64.rpm
checksum_type: sha256
description:
  The development package provides the developmental files which are
  necessary for developing Wayland compositors using Xwayland.


pkgId: 3c78540ce2cf6a9de99df0c37bafd35baeef72ae1a58bfcd98a806655e39a60c
name: xorg-x11-util-macros
arch: noarch
version: 1.20.0
epoch: 0
release: 6.el10
summary: X.Org X11 Autotools macros
url: http://www.x.org
rpm_license: HPND-sell-variant AND MIT
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: s390x-builder02.almalinux.org
rpm_sourcerpm: xorg-x11-util-macros-1.20.0-6.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/xorg-x11-util-macros-1.20.0-6.el10.noarch.rpm
checksum_type: sha256
description:
  X.Org X11 autotools macros required for building the various packages that
  comprise the X Window System.


pkgId: 8e6b610623dbb441012098b88a942ffa20e572143f44248aba15480c6ee7c11b
name: yajl-devel
arch: x86_64
version: 2.1.0
epoch: 0
release: 24.el10
summary: Libraries, includes, etc to develop with YAJL
url: http://lloyd.github.com/yajl/
rpm_license: ISC
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder02.almalinux.org
rpm_sourcerpm: yajl-2.1.0-24.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/yajl-devel-2.1.0-24.el10.x86_64.rpm
checksum_type: sha256
description:
  Yet Another JSON Library. YAJL is a small event-driven
  (SAX-style) JSON parser written in ANSI C, and a small
  validating JSON generator.

  This sub-package provides the libraries and includes
  necessary for developing against the YAJL library


pkgId: 687580bdb089f4151c0c1ac900fee67eb89c512e6e8bba60000fa2824b296b72
name: yara-devel
arch: x86_64
version: 4.5.2
epoch: 0
release: 2.el10
summary: Development files for yara
url: http://VirusTotal.github.io/yara/
rpm_license: BSD-3-Clause
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: yara-4.5.2-2.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/yara-devel-4.5.2-2.el10.x86_64.rpm
checksum_type: sha256
description:
  The yara-devel package contains libraries and header files for
  developing applications that use yara.


pkgId: 6113f6500e1435c12a29a38bf98c70a0320bed334f88f3c08d62669d487a989f
name: yggdrasil-devel
arch: x86_64
version: 0.4.4
epoch: 0
release: 7.el10
summary: yggdrasil development files
url: https://github.com/redhatinsights/yggdrasil
rpm_license: GPL-3.0-only
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: yggdrasil-0.4.4-7.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/yggdrasil-devel-0.4.4-7.el10.x86_64.rpm
checksum_type: sha256
description:
  yggdrasil is a system daemon that subscribes to topics on an MQTT broker and
  routes any data received on the topics to an appropriate child "worker" process,
  exchanging data with its worker processes through a D-Bus message broker.

  Contains files needed for yggdrasil worker development.


pkgId: a77d73dc047c2853d7f420dfa5294e3654bfb25772f7b20ebf08d9375566b298
name: zlib-ng-compat-static
arch: x86_64
version: 2.1.6
epoch: 0
release: 3.el10
summary: Static libraries for zlib-ng-compat
url: https://github.com/zlib-ng/zlib-ng
rpm_license: Zlib
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: zlib-ng-2.1.6-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/zlib-ng-compat-static-2.1.6-3.el10.x86_64.rpm
checksum_type: sha256
description:
  The zlib-ng-compat-static package contains static libraries needed for
  developing applications that use zlib.


pkgId: f771c974073c1ad1c7aa3f70ebf23bf9404220727f256e47789e03a6347eecc3
name: zlib-ng-devel
arch: x86_64
version: 2.1.6
epoch: 0
release: 3.el10
summary: Development files for zlib-ng
url: https://github.com/zlib-ng/zlib-ng
rpm_license: Zlib
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: zlib-ng-2.1.6-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/zlib-ng-devel-2.1.6-3.el10.x86_64.rpm
checksum_type: sha256
description:
  The zlib-ng-devel package contains libraries and header files for developing
  application that use zlib-ng.


pkgId: dfcd9876b005870fb4afcaf1e7ef6a5279635195567d96381c1d8d5c5c9825e6
name: zziplib-devel
arch: x86_64
version: 0.13.74
epoch: 0
release: 3.el10
summary: Development files for the zziplib library
url: http://zziplib.sourceforge.net/
rpm_license: LGPL-2.0-or-later OR MPL-1.1
rpm_vendor: AlmaLinux
rpm_group: Unspecified
rpm_buildhost: x64-builder01.almalinux.org
rpm_sourcerpm: zziplib-0.13.74-3.el10.src.rpm
rpm_packager: AlmaLinux Packaging Team <packager@almalinux.org>
location_href: Packages/zziplib-devel-0.13.74-3.el10.x86_64.rpm
checksum_type: sha256
description:
  The zziplib library is intentionally lightweight, it offers the ability to
  easily extract data from files archived in a single zip file. Applications
  can bundle files into a single zip archive and access them. The implementation
  is based only on the (free) subset of compression with the zlib algorithm
  which is actually used by the zip/unzip tools.

  This package contains files required to build applications that will use the
  zziplib library.


# files

type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/logging.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/management/jmxremote.access


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/management/jmxremote.password.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/management/management.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/sdp/sdp.conf.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/java.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/java.security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/nss.fips.cfg


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/README.txt


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/limited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/limited/exempt_local.policy


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/unlimited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/lib/security/blocked.certs


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/lib/security/default.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-fastdebug/lib/security/public_suffix_list.dat


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/jaxp.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/logging.properties


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/management


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/management/jmxremote.access


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/management/jmxremote.password.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/management/management.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/net.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/sdp/sdp.conf.template


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/java.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/java.security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/nss.fips.cfg


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/README.txt


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/limited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/limited/exempt_local.policy


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/unlimited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/conf/sound.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/lib/security/blocked.certs


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/lib/security/cacerts


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/lib/security/default.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug/lib/security/public_suffix_list.dat


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-fastdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-fastdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-fastdebug/conf/security/policy/limited/exempt_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-fastdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-fastdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/logging.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/management/jmxremote.access


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/management/jmxremote.password.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/management/management.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/sdp/sdp.conf.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/java.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/java.security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/nss.fips.cfg


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/README.txt


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/limited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/limited/exempt_local.policy


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/unlimited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/lib/security/blocked.certs


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/lib/security/default.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.4.0.7-1.el10.x86_64-slowdebug/lib/security/public_suffix_list.dat


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/jaxp.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/logging.properties


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/management


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/management/jmxremote.access


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/management/jmxremote.password.template


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/management/management.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/net.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/sdp/sdp.conf.template


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/java.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/java.security


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/nss.fips.cfg


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/README.txt


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/limited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/limited/exempt_local.policy


type: dir
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/unlimited


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/conf/sound.properties


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/lib/security/blocked.certs


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/lib/security/cacerts


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/lib/security/default.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug/lib/security/public_suffix_list.dat


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-slowdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-slowdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-slowdebug/conf/security/policy/limited/exempt_local.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-slowdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-21-openjdk/java-21-openjdk-slowdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-fastdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-fastdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-fastdebug/conf/security/policy/limited/exempt_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-fastdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-fastdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-slowdebug/conf/security/policy/limited/default_US_export.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-slowdebug/conf/security/policy/limited/default_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-slowdebug/conf/security/policy/limited/exempt_local.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-slowdebug/conf/security/policy/unlimited/default_US_export.policy


type: file
name:
  /etc/java/java-25-openjdk/java-25-openjdk-slowdebug/conf/security/policy/unlimited/default_local.policy


type: file
name:
  /usr/lib64/qt6/examples/qml/tutorials/extending-qml/chapter4-customPropertyTypes/bin/chapter4-customPropertyTypes


type: file
name:
  /usr/lib64/qt6/examples/qml/tutorials/extending-qml/chapter5-listproperties/bin/chapter5-listproperties


type: file
name:
  /usr/lib64/qt6/examples/quick/quickwidgets/qquickwidgetversuswindow_opengl/bin/qquickwidgetversuswindow_opengl


# provides

name:
  application(java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-fastdebug-jconsole-fastdebug.desktop)


name:
  application(java-21-openjdk-21.0.5.0.11-2.el10.1.alma.1.x86_64-slowdebug-jconsole-slowdebug.desktop)


