Subject: ANNOUNCE: Class::Singleton released
From: [email-masked] (Andy Wardley)
Date: 20 Feb 1998 12:55:40 GMT
Newsgroups: comp.lang.perl.announce,comp.lang.perl.modules

Announcing the release of the Class::Singleton module.  Available from 
CPAN just as soon as it's mirrored.

README attached below.

A

NAME
    Class::Singleton - Implementation of a "Singleton" class

SYNOPSIS
        use Class::Singleton;

        my $one = Class::Singleton->instance();   # returns a new instance
        my $two = Class::Singleton->instance();   # returns same instance

DESCRIPTION
    This is the Class::Singleton module. A Singleton describes an
    object class that can have only one instance in any system. An
    example of a Singleton might be a print spooler or system
    registry. This module implements a Singleton class from which
    other classes can be derived. By itself, the Class::Singleton
    module does very little other than manage the instantiation of a
    single object. In deriving a class from Class::Singleton, your
    module will inherit the Singleton instantiation method and can
    implement whatever specific functionality is required.

    For a description and discussion of the Singleton class, see
    "Design Patterns", Gamma et al, Addison-Wesley, 1995, ISBN 0-
    201-63361-2.

PREREQUISITES
    Class::Singleton requires Perl version 5.004 or later. If you
    have an older version of Perl, please upgrade to latest version.
    Perl 5.004 is known to be stable and includes new features and
    bug fixes over previous versions. Perl itself is available from
    your nearest CPAN site (see INSTALLATION below).

INSTALLATION
    The Class::Singleton module is available from CPAN. As the
    'perlmod' man page explains:

        CPAN stands for the Comprehensive Perl Archive Network.
        This is a globally replicated collection of all known Perl
        materials, including hundreds of unbunded modules.

        [...]

        For an up-to-date listing of CPAN sites, see
        http://www.perl.com/perl/ or ftp://ftp.perl.com/perl/ .

    The module is available in the following directories:

        /modules/by-module/Class/Class-Singleton-<version>.tar.gz
        /authors/id/ABW/Class-Singleton-<version>.tar.gz

    For the latest information on Class-Singleton or to download the
    latest pre-release/beta version of the module, consult the
    definitive reference:

        http://www.kfs.org/~abw/perl/

    Class::Singleton is distributed as a single gzipped tar archive
    file:

        Class-Singleton-<version>.tar.gz

    Note that "<version>" represents the current version number, of
    the form "1.23". See the REVISION manpage below to determine the
    current version number for Class::Singleton.

    Unpack the archive to create an installation directory:

        gunzip Class-Singleton-<version>.tar.gz
        tar xvf Class-Singleton-<version>.tar

    'cd' into that directory, make, test and install the module:

        cd Class-Singleton-<version>
        perl Makefile.PL
        make
        make test
        make install

    The 'make install' will install the module on your system. You
    may need root access to perform this task. If you install the
    module in a local directory (for example, by executing "perl
    Makefile.PL LIB=~/lib" in the above - see `perldoc MakeMaker'
    for full details), you will need to ensure that the PERL5LIB
    environment variable is set to include the location, or add a
    line to your scripts explicitly naming the library location:

        use lib '/local/path/to/lib';

USING THE CLASS::SINGLETON MODULE
    To import and use the Class::Singleton module the following line
    should appear in your Perl script:

        use Class::Singleton;

    The instance() method is used to create a new Class::Singleton
    instance, or return a reference to an existing instance. Using
    this method, it is only possible to have a single instance of
    the class in any system.

        my $highlander = Class::Singleton->instance();

    Assuming that no Class::Singleton object currently exists, this
    first call to instance() will create a new Class::Singleton and
    return a reference to it. Future invocations of instance() will
    return the same reference.

        my $macleod    = Class::Singleton->instance();

    In the above example, both $highlander and $macleod contain the
    same reference to a Class::Singleton instance. There can be only
    one.

DERIVING SINGLETON CLASSES
    A module class may be derived from Class::Singleton and will
    inherit the instance() method that correctly instantiates only
    one object.

        package PrintSpooler;
        use vars qw(@ISA);
        @ISA = qw(Class::Singleton);

        # derived class specific code
        sub submit_job {
            ...
        }

        sub cancel_job {
            ...
        }

    The PrintSpooler class defined above could be used as follows:

        use PrintSpooler;

        my $spooler = PrintSpooler->instance();

        $spooler->submit_job(...);

    The Class::Singleton instance() method uses a package variable
    to store a reference to any existing instance of the object.
    This variable, "_instance", is coerced into the derived class
    package rather than the base class package.

    Thus, in the PrintSpooler example above, the instance variable
    would be:

        $PrintSpooler::_instance;

    This allows different classes to be derived from
    Class::Singleton that can co-exist in the same system, while
    still allowing only one instance of any one class to exists. For
    example, it would be possible to derive both 'PrintSpooler' and
    'Registry' from Class::Singleton and have a single instance of
    *each* in a system, rather than a single instance of *either*.

    Note that the _instance variable is considered private and is
    not intended to be manipulated directly. The _instance_var()
    method is provided for derived classes to access the variable.
    It returns a reference to the variable in the correct package.
    When no previous instance of the class exists, the value of the
    variable referenced will be undefined (undef).

    Consider a case where a Singleton class requires some
    initialization process. The initialization code should be
    executed one and only once when the sole instance is created.
    The Class::Singleton instance() method can be overloaded in the
    following way to acheieve this. Note the use of _instance_var()
    to gain access to the instance variable, and the calling of the
    base class instance() method to create the object instance.

        package PrintSpooler;
        use vars qw(@ISA);
        @ISA = qw(Class::Singleton);

        sub instance {
            my $self  = shift;
            my $class = ref($self) || $self;

            # get a reference to the instance variable
            my $instvar = #self->_instance_var();

            # see if an instance is defined
            if (defined($$instvar)) {
                   $self = $$instvar;
            }
            else {
                # call base class instance() constructor
                $self = $self->SUPER::instance();

                # call any initialization code
                $self->initialize(@_);
            }
            
            return $self;
        }

    By coercing the instance variable into the derived class package
    it is possible to have many classes derived from
    Class::Singleton that each can have one and only once instance.
    However, there may be times when there should be only one
    instance of one or more derived classes.

    Returning to the print spooler example, we know that only one
    print spooler can be defined in a system. We may have defined a
    number of different print spoolers classes, any one of which can
    be instantiated and used. From that point on, it should not be
    possible to create any other PrintSpooler or derived class.

    This can be acheived by deriving all mutually exclusive classes
    from a common base class. The base class instance() method
    should be overload as follows:

        package PrintSpooler;
        use vars qw(@ISA);
        @ISA = qw(Class::Singleton);

        sub instance {
            my $self  = shift;
            my $class = ref($self) || $self;

            # create a temporary $self instance blessed into a 
            # common 'PrintSpooler' class 
            $self = bless {}, 'PrintSpooler';

            # all derived classes now look like a 'PrintSpooler'
            # when they call Class::Singleton->instance())
            $self = $self->SUPER::instance();

            # now bless returned instance into the required class
            bless $self, $class;
        }

    Using this approach, only one instance of *any* class derived
    from PrintSpooler will be instantiated.

        package PrintSpoolerOne;
        use vars qw(@ISA);
        @ISA = qw(PrintSpooler);

        package PrintSpoolerTwo;
        use vars qw(@ISA);
        @ISA = qw(PrintSpooler);

        package main;
        
        my $spooler1 = PrintSpoolerOne->instance();
        my $spooler2 = PrintSpoolerTwo->instance();

    In the above code, both $spooler1 and $spooler2 will reference
    the same hash, although they will be blessed into their
    respective PrintSpoolerOne and PrintSpoolerTwo classes.

AUTHOR
    Andy Wardley, `<[email-masked]>'

    SAS Group, Canon Research Centre Europe Ltd.

REVISION
    $Revision: 1.1 $

COPYRIGHT
    Copyright (C) 1998 Canon Research Centre Europe Ltd. All Rights
    Reserved.

    This module is free software; you can redistribute it and/or
    modify it under the term of the Perl Artistic License.

SEE ALSO
    Andy Wardley's Home Page
        http://www.kfs.org/~abw/

    The SAS Group Home Page
        http://www.cre.canon.co.uk/sas.html

        The research group at Canon Research Centre Europe
        responsible for development of Class::Singleton and similar
        tools.

    Design Patterns
        Class::Singleton is an implementation of the Singleton class
        described in "Design Patterns", Gamma et al, Addison-Wesley,
        1995, ISBN 0-201-63361-2

--
Andy Wardley <[email-masked]> http://www.kfs.org/~abw    
Signature lost in transit.  We apologise for any inconvenience caused.