Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

raspberrypi-firmware-config-2022.07.04-1.1 RPM for noarch

From OpenSuSE Tumbleweed for noarch

Name: raspberrypi-firmware-config Distribution: openSUSE Tumbleweed
Version: 2022.07.04 Vendor: openSUSE
Release: 1.1 Build date: Sat Jul 9 17:09:13 2022
Group: System/Boot Build host: sheep81
Size: 3046 Source RPM: raspberrypi-firmware-config-2022.07.04-1.1.src.rpm
Packager: https://bugs.opensuse.org
Url: https://github.com/raspberrypi/firmware/
Summary: Configuration for the Raspberry Pi firmware loader
This package configures the Raspberry Pi boot process.
2 flavors are available:
  * raspberrypi-firmware-config - the default config
  * raspberrypi-firmware-config-camera - the config which enables
  start_x=1 and increase gpu_mem to be able to use a camera module

Note: config.txt should not be used to set manually params (gpu_mem, etc.)
please create extraconfig.txt instead.

Provides

Requires

License

MIT

Changelog

* Fri Jul 08 2022 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to df569e0 (2022-07-04):
    * firmware: video_decode: Stop decode on a colourspace change
      See: raspberrypi/linux#5059
    * firmware: video_encode: Fix subsample image alignment assert
    * firmware: tc358762_DSI: Don't start the PV and DSI before the HVS
    * firmware: hello_pi: Fix some build issues
      See: #1728
    * firmware: arm_dt: camera_auto_detect cam0 flag needs to
      look at Unicam instance, not port
    * firmware: platform: over-voltage Zero 2 W by two pips
      See: #1723
    * firmware: arm_loader_dvfs: Only add clocks to boostable list
      when they have been boosted
      See: #1726
    * firmware: arm_dt: Try upstream DTB files if downstream absent
    * firmware: arm_loader: Delay the USB controller switchover
    * firmware: Fix for vc_image YUYV family to YUV422 planar conversion function
    * firmware: vcgencmd display_power and camera_auto_detect fixes
    * firmware: variants: Add mjpg_encode to the standard firmware image
    * firmware: arm_loader_dvfs: Support CLOCK_HDMI as boostable clock
      See: raspberrypi/linux#5016
    * firmware: dtblob: Use a cached alias to reduce boot time
    * firmware: hdmi: Reduce the number of EDID retries if hotplug is not detected
    * firmware: arm_loader: Support longer file paths
      See: #1720
    * firmware: arm_loader_dvfs: Make arm only see its own boosts,
      fixed and min clocks
    * firmware: dtoverlay: Fix path rebasing and exports
    * firmware: dtoverlay: Fix clang warnings
    * firmware: dtoverlay: Add support for string escape sequences
      See: https://forums.raspberrypi.com/viewtopic.php?t=330792
    * firmware: isp: R and B order must be swapped when reading
      VC_IMAGE_RGBA32 into the ISP
      See: http://git/vc4/vc4/-/merge_requests/1430
* Fri Mar 04 2022 Martin Wilck <mwilck@suse.com>
  - Install modprobe.conf files to %_modprobedir (bsc#1196275, jsc#SLE-20639)
* Wed Mar 02 2022 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 231daece7c (2022-03-01):
    * firmware: board_info: Handle misprogrammed 3B rev 1.2s
    * firmware: mmal: Add mapping for IL OMX_IndexParamBrcmEnableIJGTableScaling param
    * firmware: Handle overlay parameters embedded in overlay_map.dtb
      See: raspberrypi/linux#4860
    * firmware: firmware: Add HDMI_PORTS trait
    * firmware: arm_dt: Fix rpi-poe overlay parameters
      See: #1689
    * firmware: jpeghw: Skip APP0 AVI1 headers, regardless of length
      See: https://forums.raspberrypi.com/viewtopic.php?p=1975448
    * firmware: camera_subsystem: Report ignored interfaces due to libcamera
      See: #1679
    * firmware: Export os_prefix, overlay_prefix, rsts and boot-mode on all models
    * firmware: vcfw/hdmi_i2c: Initialise all instances from hdmi_i2c_init
    * firmware: mmal: Add mapping for IL OMX_IndexParamBrcmEnableIJGTableScaling param
      See: raspberrypi/linux#4669
* Tue Jan 25 2022 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 9c04ed2c1a (2022-01-24):
    * firmware: platform: Limit max clock-id to CLOCK_VEC for now
      See: #1688
* Mon Jan 24 2022 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 827fdd0736 (2022-01-20):
    * firmware: dtoverlay: Don't mix non-fatal errors and offsets
      See: #1686
    * firmware: arm_loader: Load vl805 overlay on CM4
      See: https://forums.raspberrypi.com/viewtopic.php?t=326088
    * firmware: gencmdserv: Add mailbox interface to gencmd
    * firmware: improve firmware camera detection
    * firmware: arm-loader: Fix kernel8.img selection on 2837 with arm_64bit=1
      See: #1671
    * firmware: ldconfig: Discard subsequent chunks from a truncated line
      See: #1669
    * firmware: cec: Fail set_passive_mode when running with kms
    * firmware: Firmware: Remove PWM/audio traits for CM4
    * firmware: usb: Fix non-BCM2711 MSD support
      See: raspberrypi/usbboot#102
* Wed Dec 22 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 1a0297bfbf (2021-12-01):
    * firmware: board_info: Add upstream dtb names for cm1 & 3
    * firmware: board_info: Add upstream dtb name for cm4
      See: #1660
    * firmware: platform: Allow users to disable camera boot HMAC check
      See: #1657
    * firmware: clock: 2711: Fix potential API issue in 2711 VCO setup
    * firmware: arm_loader: Enable USB MSD boot mode on Zero 2 W
    * firmware: isp: Fix Rec.709 colour space problems
* Mon Nov 22 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Fix deps for raspberrypi-firmware-config and raspberrypi-firmware-config-camera
* Wed Nov 17 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Add raspberrypi-firmware-config-camera flavor - boo#1192047
* Wed Nov 17 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 12bc6e3677 (2021-11-16):
    * firmware: dtoverlay: Rebase aliases in overlays like labels
    * firmware: isp: Set core/vpu min clock to 320Mhz during ISP operation
    * firmware: arm_loader: Enable watchdog early if wanted
      See: #1651
    * firmware: hello_fft: Update outdated link to V3D spec
    * firmware: hello_fft: Remove unused function declaration
      See: #1645
      See: raspberrypi/userland#710
    * firmware: platform: Declare CM4's SIO_1V8_SEL and SD_PWR_ON
      See: raspberrypi/Raspberry-Pi-OS-64bit#188
    * firmware: platform: Fix incorrect turbo voltage scaling on Pi0
      See: raspberrypi/documentation#2255
    * firmware: ISP: Fix magenta colour in right hand image of stereo pair
      See: https://forums.raspberrypi.com/viewtopic.php?t=321089
    * firmware: platform: Remove licence on VP6, VP8, Theora, and FLAC
      See: raspberrypi/linux#4661
    * firmware: arm_loader: Allow VEC clock to be controlled by arm
    * firmware: userland: Reduce debug_sym error messages
      See: https://forums.raspberrypi.com/viewtopic.php?f=98&t=322238
    * firmware: arm_dt: Increase maximum line length to 98
      See: raspberrypi/linux#4638
    * firmware: video_decode: i/p port enable/disable without o/p active could stall
      See: RPi-Distro/vlc#48
      See: Hexxeh/rpi-firmware#272
      See: #1637
    * firmware: clock-2711: Limit PLLB VCO frequency to the high range
    * firmware: arm_dt: Export the boot-mode, partition and usb state via device-tree
      See: #1621
* Tue Oct 05 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to b5257da58c (2021-09-30):
    * firmware: arm_loader: Allow non-optional reads of current clock
      See: #1619
    * firmware: dispmanx: Demote null eptr from vcos_verify to no warning
      See: raspberrypi/linux#4592
    * firmware: filesystem: sdcard: Probe FAT type in GPT ESD partitions
    * firmware: tvservice: Add check to warn when running with kms
    * firmware: filesystem: sdcard: Fix Hybrid GPT partitions
      See: #1465
    * firmware: video_decode: Ensure all buffers are flushed before
      port disable completes
    * firmware: arm_loader: Allow hvs interrupt during SET_NOTIFY_DISPLAY_DONE
    * firmware: arm_display: Allow null buffer in successful call
      See: raspberrypi/linux#4540
* Tue Sep 14 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to b80f36b3fb (2021-09-13):
    * firmware: hdmi_2711: Use HDMI block REPEAT_PIXEL instead of PV
      See: https://forum.libreelec.tv/thread/24415-le-10-beta-for-i4-force-hdmi-resolution
    * firmware: DSI display autodetection for kms
    * firmware: arm_dt: Load overlays for detected cameras
    * firmware: Make more use of the user-warnings DT property
    * firmware: arm_loader: Consider required flags from GET_CLOCK_RATE
      See: #1598
    * firmware: arm_loader: Make most arm clock requests required
      See: #1598
    * firmware: firmware: Disable VLL loading from file system
      See: #1605
    * firmware: video_decode: Use the ISP instead of vc_image_convert
    * firmware: video_decode: Correct support for YVU formats using ISP
    * firmware: arm_dt: Limit CMA to 256MB if total_mem < 2GB or gpu_mem > 256MB
      See: #1603
    * firmware: hdmi_cec: Remove TX/RX SW_INIT on power_on
      See: Hexxeh/rpi-firmware#267
      See: https://www.raspberrypi.org/forums/viewtopic.php?p=1895082#p1895082
    * firmware: cec: Avoid sending messages with kms
      See: raspberrypi/linux#4460
    * firmware: Revert: video_decode: Use the ISP instead of vc_image_convert
    * firmware: isp: Set the YUV420/YVU420 format stride to 64 byte
    * arm_loader: Add message to release firmware framebuffer
    * firmware: video_decode: Use the ISP instead of vc_image_convert
    * firmware: hdmi-2711: Wait for HDMI hardware scheduler to activate in HDMI mode
    * firmware: bcm_host: Recognise all Pi 4 variants, add BCM2711
      See: raspberrypi/userland#695
    * firmware: PoE+ HAT support
      See: raspberrypi/linux#4367
    * firmware: arm_loader: Use Pi4 bootloader MAC_ADDRESS if set
    * firmware: platform: Apply ARM thermal throttling rules on BCM2711
    * firmware: dt-blob.dts: Correct HDMI HPD and EMMC_ENABLE for CM4
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&p=1858516
    * firmware: vcfw/hdmi: CUSTOM modes used for FKMS didn't set RGB quant range correctly
      See: #1580
    * firmware: platform: Remove build-time constant for MICROVOLTS_PER_PIP
    * firmware: Pi400: Reduce MII clock freq when probing ethernet PHY
    * firmware: isp: Ensure the VRF is locked when setting up video colour denoise
      See: raspberrypi/libcamera-apps#19
    * firmware: isp: Remove custom EV mappings from camera tunings
    * firmware: Add support for board-type=0xXX conditional filters in bootloader, bootcode and firmware
    * firmware: Two UART1 patches
      See: #1566
    * firmware: arm_loader: kernel_old=1 should force kernel_address=0
      See: #1561
    * firmware: scalerlib: Fix offset applied to x coordinate of YUV10COL image
      See: https://forum.kodi.tv/showthread.php?tid=361164&pid=3024654#pid3024654
    * firmware: vcfw/power: Add a new latch for power_pad_control
      See: #1552
    * firmware: board-info: Fix memsize on 3B+
    * firmware: Move core to PLLA and support accurate clk108
      See: xbmc/xbmc#19263
    * firmware: board_info: Separate memory size from OTP field encoding
    * firmware: power: Swap DA9090 ADC assignments to match XR77004
    * firmware: vl805: Remove redundant log statement and fix warning
    * firmware: power: Fix DA9090 ADC1 register definition
    * firmware: arm_loader: Only report clocks arm has set, not siblings
    * firmware: arm_loader: Don't report clocks set as turbo side effect of arm clock
    * firmware: arm_loader: 2711: gpu clocks are not dependant
    * firmware: platform: Need to clear cached versions of get_max_clock_internal vars
    * firmware: video_decode: For VC1/WMV with no signalled header bytes, use start of 1st buffer
    See: raspberrypi/linux#4113
* Fri Apr 09 2021 Matthias Brugger <mbrugger@suse.com>
  - Use smbios overlay to get minimal SMBIOS information through dmidecode (bsc#1183079)
* Tue Mar 16 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Fix previous change. No need to set DWC2 in host mode. OTG works fine on
    production CM4 IO boards. It was being tested earlier on a pre-release
    development board. (bsc#1183241)
  - Run pre_checkin.sh, which fixed some style issues.
* Mon Mar 15 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Set CM4's DWC2 in host mode by default (bsc#1183241)
* Fri Mar 12 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to 0591568b29 (2021-03-10) (bsc#1183444):
    * firmware: video_decode lockup handling
    * firmware: isp: Initialise extras to avoid vpitch being random
    * firmware: usb: Fix dropouts with USB ethernet gadget
    * firmware: imx477: Allow long exposures for the binned modes.
    * firmware: arm_dispmanx: Use ALPHA_MIX flag
    * firmware: power: Refactor the interface to the PMICs
    * firmware: platform: vl805: Get BAR2 address from PCIe BAR2 registers
    * firmware: arm_loader: Return all borrowed DMA channels
* Wed Mar 10 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Fix typo s/pannel/panel/
* Mon Mar 08 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Enable bluetooth over PL011 by default (jsc#SLE-17223)
  - Enable VC4 by default on RPi4 (jsc#SLE-12151)
* Wed Jan 27 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Use disable-v3d overlay, it isn't ready for users to use but soon good enough
    for a technology preview. (jsc#SLE-15928)
* Fri Jan 22 2021 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to 051e5e1be8 (2021-01-21) (jsc#SLE-16616):
    * firmware: Export bootloader config via device-tree
    * firmware: ISP: Colour denoise
    * firmware: platform: Define DVFS modes and change default to be fixed AVS voltage
    * firmware: arm_loader: Auto-select 64-bit for kernel8.img
    * firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun
* Fri Jan 15 2021 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to c78f3ef4 (2021-01-15):
    * firmware: isp: Fix handling of different YUV colour spaces
    * firmware: poe_hat: Actually close the I2C handle
    * Firmware: undo previous reverts
    * firmware: Revert firmware: HAT/I2C updates
    * firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats
    * firmware: audioplus: Fix hang when switching destination
      See: #1516
    * firmware: HAT/I2C updates
    * firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 format
    * firmware: dmalib: Keep 40-bit DMA clear of L2 alias
    * firmware: DSI interrupt fixes, and HDMI SM clock for deep colour
* Wed Dec 16 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 8a5549c (2020-12-15):
    * firmware: dmalib: Allow sdcard to borrow channel 6
      See: #1511
      See: Hexxeh/rpi-firmware#251
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=294932
* Tue Dec 15 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 8cd7665 (2020-12-14):
    * firmware: Use DMA40 for PWM audio
    * firmware: imx477: Replace existing 720p120 mode with a new 1332x990 120fps mode
    * firmware: arm_loader: Allow max_framebuffers=0 to disable framebuffers
      See: #1507
* Wed Dec 09 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to 919aee0ed7 (2020-12-08):
    * firmware: Switch DA9121 PMIC to PWM mode when ARM > 600 MHz
    * firmware: xhci: Don't reset BCM2711 XHCI from filesys in start.elf
    * firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3
* Thu Oct 29 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Remove vl805-firmware-loader overlay as it now reached upstream.
* Thu Oct 29 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 5f95dfda (2020-10-22) - boo#1178262
    * firmware: hdmi: Timeout HDMI EDID reads
    * firmware: arm_ldconfig: Don't invalidate the dcache for most of memory
      See: #1445
    * firmware: arm_loader: Allow arm to see force_turbo and uart boosts
    * bootcode: usb: Fix USB init for 2835 bootcode.bin
    * firmware: arm_loader: Update armstubs with those from PR 117 …
      See: raspberrypi/tools#117
    * firmware: Revert sdcard: Reduce SD read overhead
    * firmware: arm_loader: Add GET/SET_VPU_VECTOR mailbox calls
    * firmware: arm_loader: enable simple_fb iff there is a display
      See: raspberrypi/linux#3878
    * firmware: arm_loader: Mark V3D early boost as for the ARM
      See: #1469
* Thu Oct 01 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to e7464dd (2020-09-30):
    * firmware: platform: Add support for SCB clock and set to 250MHz
    * firmware: Revert arm_loader: Move first call to set_turbo after arm->start
    * firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support
    * arm_ldconfig: Fix kernel8 decompression See: #1467
    * firmware: arm_ldconfig: Restore the fallback load address See: #1467
    * firmware: ilcamera: Disable timeouts on trigger sink devices
    * firmware: genet: Flush RBUF/TBUF and clear mac-address on stop
      See: raspberrypi/linux#3850
    * firmware: dmalib: Add support for 40-bit 2d memcpy
    * firmware: sdcard: Reduce SD read overhead
    * firmware: sdhost_arasan: Increase time threshold before suspend
    * firmware: video_decode: Only shutdown codec on both ports being disabled …
    * firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer
    * firmware: arm_loader: Make arm clock accesses only see their own boosts
      See: #1469
* Wed Sep 09 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to baec4d28b (2020-09-03) (bsc#1176202)
    * firmware: Update to latest master
* Tue Aug 04 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to bd816dbac (2020-07-31)
    * firmware: Switch to master branch for Pi4 firmware
    * firmware: il: isp: Ensure HR output is active and ISP is open before starting a frame
    * firmware: isp_ctrl: Fail in start_[raw|yuv]_frame if ISP is not idle See:
      https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=275489
* Tue Jul 21 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add vl805-firmware-loader overlay so as for upstream u-boot to be able to
    acess USB.
* Fri Jul 03 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add armstub=armstub8-rpi4.bin entry conditionally for rpi4, if not present in
    boot partition the boot will continue as is.
* Fri Jun 05 2020 Fabian Vogt <fvogt@suse.com>
  - Move config tweaks to this package (boo#1172387)
* Wed Apr 08 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add cma-default option to vc4-kms-v3d overlay to mimic the previous default
    behaviour, which used the kernel's default size. For now we still set the CMA
    trough the kernel command line, that will change in the future. (bsc#1167761)
* Mon Apr 06 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Get rid of rpi4-thermal overlay, not needed anymore
  - Get rid of rpi4-firmware-dma-ranges overlay, not needed anymore
  - Get rid of rpi4-gpio-names overlay, not needed anymore
* Wed Apr 01 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Drop Supplements for extra and extra-pi4
* Tue Mar 31 2020 Petr Tesařík <ptesarik@suse.com>
  - Use proper quoting for the modalias Supplements (see also
    https://github.com/openSUSE/libzypp/issues/216).
* Fri Mar 27 2020 Petr Tesařík <ptesarik@suse.com>
  - Add a modalias Supplements, so the package gets selected
    automatically on a Raspberry Pi.
* Thu Mar 26 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Remove rpi4-cma overlay, not needed anymore (bsc#1167761)
* Fri Mar 20 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add rpi4-firmware-dma-ranges overaly which fixes touch input on the official
    7" display (bsc#1167147)
* Wed Mar 11 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add uboot-bcm2835-pl011 overlay, which fixes the serial port compatible name
    as expected by u-boot, relevant for RPi, RPi2 and RPi0 families (bsc#1166414)
* Fri Feb 28 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add rpi4-gpio-names overlay so as to have a consistent way to access GPIOs (bsc#1164722)
* Thu Feb 27 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Remove rpi4-pcie-ib-size-fix as raspberrypi-firwamre-dt removed it (bsc#1165143)
* Fri Feb 21 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Update to f4b5869 (2020-02-12) (bsc#1163476):
    * firmware: board_info: Fix GPIO expander reset trait
    * firmware: gencmd: Fix measure_clock name for CLOCK_OUTPUT_108
    * firmware: platform: Compromise on gpu overclock settings
  - After the rpi-5.5.y update in raspberrypi-firmware-dt:
    * Remove rpi4-genet as it's not needed anymore
    * Remove gpu_mem entry for rpi4
* Wed Jan 22 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to be2713bed4 (2020-01-16):
    * firmware: master: arm_ldconfig: Support multiple initramfs files
      See: #1318
    * firmware: power: Make pmicrd/pmicwr available to all
    * firmware: arm_ldconfig: Support multiple initramfs files
      See: #1318
    * firmware: Add support for backlight enable
    * firmware: Revert mmal: Support 64 bit clients
      See: raspberrypi/userland#586
    * firmware: arm_dt/dtoverlay fixes for ARM side camera driver power control
    * firmware: Fixup for vcgencmd display_power
      See: #1224
    * firmware: Add hdmi_wifi_pixel_freq_adj config option
* Mon Jan 20 2020 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add rpi4-thermal device tree overlay for RPi4 (bsc#1160311)
* Thu Jan 09 2020 Matthias Brugger <mbrugger@suse.com>
  - Disable overscan by default (bsc#1160473)
* Thu Dec 19 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 0c01dbefba (2019-12-11):
    * firmware: platform: Allow fixed voltage with avs_disable=1
    * firmware: EMMC: Use PLLD for EMMC for 250MHz host-clock
      See: #1289
    * firmware: platform: Round down effective frequencies when they exceed max
      See: #1290
    * firmware: arm_loader: Pass video mode via kernel command for composite
      See: #1285
    * firmware: Fix lens shading table generation buglet
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=190586&start=75#p1534672
    * firmware: hdmi: Use RB2 timing for 2560x1440@60 if pixel clock is 241.5 MHz
    * firmware: arm_dt: Look for ethernet0 before ethernet
    * firmware: arm_dt: Set PCIe dma-ranges from memory size
    * firmware: hdmi: HDMI SM clock must not run slower than audio MAI clock …
      See: #1295
    * firmware: arm_loader: Pass video mode via kernel command for composite (master)
      See: #1285
    * firmware: power: Use Pi4 PMIC values on Pi3+
    * firmware: Fix filtered handling of array variables
      See: #1296
    * firmware: Update libfdt to v1.5.1+
      See: raspberrypi/userland#582
    * firmware: dtoverlay: Extend DT parameter syntax
    * firmware: memorymap: Include FW revision in start.elf
* Wed Dec 04 2019 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Add custom gpu_mem config for RPi4 (bsc#1158406)
* Wed Nov 27 2019 Matthias Brugger <mbrugger@suse.com>
  - Load rpi4-genet-overlay to fix the compatible for the network device (jsc#SLE-7771)
* Tue Nov 26 2019 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - Enable rpi4-cma dt overlay to properly setup CMA on that platform (SLE-7771)
  - Enable rpi4-pcie-ib-size-fix dt overlay to properly setup PCIe on that
    platform (SLE-7771)
* Tue Nov 26 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 6e4a7232c (2019-11-19):
    * firmware: platform: Differentiate between boostable and turbo clocks
    * firmware: arm_dt: Set WL_ON and BT_ON from .dtb
    * firmware: Fixup chosing of bit depth in legacy graphics
      See: raspberrypi/linux#3331
    * firmware: vec: Setup WideScreen Signalling outside of copy protection
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=256489
    * firmware: Add global reset mailbox
    * firmware: 2711: De-couple start.elf clock setup from the bootloader
    * firmware: scaler: Correct defines for SCALER_POS0_START_Y_[MASK|SHIFT] (HVS4)
    * firmware: platform: Fix missing HDMI PHY power down bit
    * firmware: Reduce voltage as part of DVFS
    * firmware: arm-loader: Inherit 2711 mac-address from the bootloader
      See: http://git/vc4/vc4/merge_requests/687
    * firmware: arm_loader: Respect all required frequencies when throttling
    * firmware: Fixup vcgencmd display_power return values
* Mon Nov 25 2019 Matthias Brugger <mbrugger@suse.com>
  - If booting RPi in arm64 mode or not will be set by u-boot through
    ubootconfig.txt. This allows to build u-boot for RPi3/4 with 32-bit.
* Fri Nov 15 2019 Matthias Brugger <mbrugger@suse.com>
  - config changes for RPi3:
    * delete upstream-aux-interrupt as not present anymore
    * set arm_control for RPi3 only
    * add RPi3 overlays
* Mon Nov 11 2019 Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
  - disable vc4 on RPi4 using the disable-vc4.dtbo devicetree overlay (SLE-7771)
* Wed Nov 06 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 8e688a443 (2019-11-06):
    * firmware: Unicam: Request frequency of 250MHz when running camera use cases
    * firmware: arm_loader: Fix UART unmapping
    * firmware: uart1: Revert to the old core-frequency-locking method
      See: #1267
    * firmware: arm_loader: Provide a sensible device_tree_end default
      See: #1259
    * firmware: mmal_ril: Fix size reported on ENOSPC error
      See: #1269
    * firmware: hvs: Trigger the EOLn timer at the field rate when interlaced
      See: #1227
    * firmware: bootloader_state: Add support for a custom TFTP prefix parameter
    * firmware: arm_loader: GIC stub => 2711 stu
      See: #1255
    * firmware: arm_loader: Add os_prefix option
      See: raspberrypi/linux#3237
    * firmware: Add support for arbitrary memory specification
    * firmware: arm_loader: Fix explicit kernel name handling
      See: #1277
    * firmware: Added a new display power mailbox call
    * firmware: Update display_power gencmd with optional display id
      See: raspberrypi/linux#3050
    * firmware: Remove legacy pkgconfig to avoid Mesa conflicts
      See: raspberrypi/userland#585
    * firmware: Update display_power gencmd with optional display id
    * firmware: sysman: Fix unsafe check for h264 being enabled
      See: popcornmix/omxplayer#749
    * firmware: platform: Reduce absolute microvolts threshold to 500000
    * firmware: Loop to init hotplug
* Fri Oct 04 2019 Matthias Brugger <mbrugger@suse.com>
  - add RPi4 config options
* Wed Oct 02 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to a16470ad4 (2019-09-30)
    * firmware: platform: Set up emmc clock earlier
    * firmware: hdmi: Implement platform_display_power on 2711
      See: #1224
    * firmware: arm_loader: Pass overscan settings to the kernel
    * firmware: arm_loader: Add option disable_fw_kms_setup to stop FKMS setup by FW
    * firmware: hdmi: Use pixel clock multiplier to determine the core clock
    * firmware: Fixups for composite output mode
      See: #1223
    * firmware: platform: Allow display_power to be queried from gencmd
      See: #1224
    * firmware: arm_loader: Fix no-DT and upstream handling
      See: #1250
    * firmware: Round up HDMI0 minimum core clock
    * firmware: board_info: Support bcm2710- and bcm2837- Pi 2 DTBs
      See: raspberrypi/linux#3234
    * firmware: power: bcm2711: Rescale the GPIO pad power
    * firmware: brfs: Add GENET driver for 2711
    * firmware: bootloader_state: Add network state and bootmode configuration
    * firmware: bootloader_state: Fix mask for EEPROM header magic
    * firmware: arm_loader: Fix initial_turbo getting stuck
      See: #1005
    * firmware: ldconfig: Support [edid=*] to mean any HDMI monitor
      See: #1136
    * firmware: image_fx: Remove restriction that output stride must match input stride
    * firmware: image_fx: Remove spamming log line
    * firmware: platform: Switch to divide by one when arm_freq exceeds 2GHz
    * firmware: Add EMMC support to 2711 Arasan EMMC driver
    * firmware: arm_loader: Use /memory@0 if found
      See: raspberrypi/linux#3244
    * firmware: bootloader_state: Fix length for bootloader_config
    * firmware: arasan_emmc: Fix STB_GPIOOVERRIDE for MMC1 in network boot
    * firmware: bfs: Verify that eth FS has not been closed before using
* Mon Sep 16 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Do not run %preun scripts on upgrade (boo#1150408)
* Thu Sep 05 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to e2e17cd03 (2019-09-04)
    * firmware: Port file loading revamp to master
    * firmware: Avoid defaulting to 64-bit kernel on older Pi
    * firmware: Revamp file loading logic
    * firmware: power: Allow reading uncached voltage
    * firmware: arm_loader: Request KMS to use CVT timings
    * firmware: vc_image: Default YUVUV to non-tall mode, with flag if required
    * firmware: ldconfig: Implement [pi2/pi3/pi3+] using board types
      See: #1242
    * firmware: platform: Remove 10mV of margin
    * firmware: power: Add 2711-specific PMIC compensation values
    * firmware: sdhost_arasan: Disable busy wait on EMMC_STATUS_NEW_CARD_DATA_SET
    * firmware: AWB: Fix for manual WB settings in capture
      See: #1215
    * firmware: arm_loader: Use platform_get_min_core_voltage for actual min voltage
    * firmware: clock: Remember disable state across clock changes
    * firmware: platform: pi4: Reduce min core voltage to 810mV
    * firmware: arm_dt: Use boost to force turbo mode rather than modifying core_freq_min for uart
    * firmware: arm_loader: Add optional flag to add_boost and get_boost calls
    * firmware: avs_2711: Move margin from init structure to run time
    * firmware: platform: fix get_min_default
    * firmware: arm_loader: Use AP_CLOCK_T for clock_iterator for easier debugging
    * hdmi: Switch to active pixel rate + margin for core clock boost
    * platform: Reduce the minimum core clock frequency from 250 to 200 MHz
    * firmware: arm_loader: Fix initial_turbo getting stuck
      See: #1005
    * firmware: clock_2711: don't set reserved values for KA in PLL KAIP registers
    * firmware: AWB: Allow user to set manual gains for the RPi algorithm
    * firmware: arm_loader: Fix disabling of audio before reboot
    * firmware: fixed up the custom CVT values to use correct group
    * firmware: hdmi: Add independent table entries for hdmi_timings on each display
      See: #1218
    * firmware: Fix to allow HDMI audio port route setting
      See: raspberrypi/linux#3100
    * firmware: pwm_audio: Use the correct DREQs on Pi4
      See: #1214
    * firmware: pixelvalve_2711: Alter back porch for widths of 1366
      See: #1202
    * firmware: Clear the SMIDSW1 display interrupt flag on startup
    * firmware: dt-blob: Declare Pi 4B's SD_IO voltage selector
    * firmware: Fixups for missing code changes from Pi4 branch
      See: #1201
    * firmware: Change order of display remapping for default display number
    * firmware: AWB: Set default number of stats regions for RPi AWB
      See: #1198
    * firmware: Fix composite interrupt HVS channel
    * firmware: scalarlib: Fix width setting for SCALERLIB_PIXEL_FORMAT_YUV10COL
    * firmware: vcmailbox: Add a new SET_AUDIO_LDO_STATE mailbox command
    * firmware: Add mailbox call to report the HDMI timings
    * firmware: H264: Set the decoder cache AXI burst length to the same as the encoder
    * firmware: gencmd: Fix gencmd max result length
    * firmware: bootloader_config: New gencmd to read the EEPROM config
    * firmware: pwm_audio: Use PWM1 on BCM2838 unless remapped
      See: #1178
    * firmware: AWB updates
      See: #1167
    * firmware: dispmanx: Fix handling of disable_overscan to not disable it totally
      See: raspberrypi/linux#3059
    * firmware: power: Enable/disable H264 and ISP clocks with domain
    * firmware: arm_loader: arm_64bit=0 should disable loading of kernel8.img
    * firmware: dt-blob: CM has no activity LED
* Wed Jul 10 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Fix %post scripts to copy RPi4 firmware files too
  - Add %preun to remove files from EFI partition
  - Move Pi4 debug firmware to its own package extra-pi4 due to
    limited size on EFI partition
* Wed Jul 10 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 025759b8 (2019-07-09):
    * firmware: hvs: Emulate the EOLn interrupt with a timer reset from VSTART
      See: #1154
    * firmware: Add support for Rec2020 colour space in vc_image, IL, and MMAL
    * firmware: Fix composite mode on devices up to Pi3B+
      See: #1166
    * firmware: Fixes for core_freq_min causing failure on HDMI1
      See: http://git/vc4/vc4/merge_requests/529
    * firmware: hdmi: Don't release previous boost until mode set is complete
      See: #1159
    * firmware: bcm_host: Adjust for 64-bit physical addresses
      See: #1161
    * firmware: arm_loader: Shrink most stubs back to 256 bytes, add arm64 GIC stub
      See: raspberrypi/linux#3032
    * firmware: arm_dispmanx: Add support for setting the colour encoding
    * firmware: dmalib: Fix Lite channel interrupt usage, and macro name
    * firmware: Force overscan off when using LCDs
      See: #1173
    * firmware: cec: Fix crash when using CEC with HDMI1
    * firmware: arm_display: Fix race condition initialising CEC
    * firmware: hdmi: Always use boost frequency for initial mode set
      See: #1159
    * firmware: AWB: Fix usage for IR operation
      See: #1167
    * firmware: arm_loader: Support CLOCK_EMMC2 from GET_CLOCK_RATE
      See: #1179
    * firmware: arm_loader: Force word alignment for the DTB
      See: #1175
    * firmware: clock_2711: don't set reserved values for KA in PLL KAIP registers
    * firmware: Assorted minor fixes for tvservice -o
    * firmware: Rename hdmi_enable_4k to hdmi_enable_4kp60
    * frimware: Revert: clock_2711: don't set reserved values for KA in PLL KAIP registers
* Wed Jun 26 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to d786b62 (2019-06-25):
    * firmware: Fix AWB exception bug
    * firmware: Updates for Pi4
    * firmware: 2711: CORE, EMMC & BVB clock updates for WiFi / 4Kp60
    * firmware: 711: Use boost instead of fixed freq for 4Kp60
* Wed Jun 05 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to e289f6a59 (2019-05-28):
    * firmware: smservice: Avoid a double free
    * firmware: arm_loader/display: All the framebuffer allocation to be made on the ARM
    * firmware: isp_tuners: Fix memory leak in error path
    * firmware: testc: Fix dps parsing
    * firmware: camera_subsystem: Fix hardware sync pulses off disable_camera_led
    * firmware: Replace the remaining direct users of C(mask_gpu_interrupt[0|1])
    * firmware: arm_display: Kick transposer for the rainbow screen if required
    * firmware: dispmanx: Do not allow transpose if using Full KMS
      See: raspberrypi/linux#2891
    * firmware: Revert: arm_loader/display: All the framebuffer allocation to be made on the ARM
    * firmware: arm_loader: Further conditionals for passing in a frame buffer
    * firmware: di_adv: Drop back to fast if QPUs are masked off
* Fri Mar 08 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to fd15e070 (2019-03-08):
    * firmware: raspivid: Stop --raw option resetting --raw-format to YUV
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=189830&start=25#p1432589
    * firmware: Fixed up overflow in microsecond timer
      See: raspberrypi/userland#535
    * firmware: camera_subsystem: Clean up disable_camera_led handling
    * firmware: smservice: Add defines for VPU allocations
    * smservice: Add support for reporting the supported version to the host
    * firmware: Camplus: cdi: Remove requirement for calibration functions
    * firmware: isp: Reinstate lres shift parameter accidentally dropped with gamma changes
      See: #1108
    * firmware: mmal_ril: List all 4 Bayer orders if the IL component says it supports Bayer
    * firmware: camera/image_encode: Add timestamp to frames encoded with image_encode
      See: raspberrypi/linux#2351
* Thu Jan 31 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to 81cca1a (2019-01-22):
    * firmware: Added ability to have an third transpose buffer
      See: #837
    * firmware: isp: Correct the conversion tables changed in adding the gamma block
      See: #1084
    * firmware: raspberrypi_full variant: Drop unused Camplus sw stages
    * bootcode: Reset WiFi and BT devices before resetting the expander
      See: #1088
    * bootcode: Fix Ethernet boot on a different subnet
      See: #1078
    * firmware: interface: Drop vcfiled
      See: raspberrypi/userland#525
    * firmware: Add reference counting to the local audio players
      See: #547
    * firmware: arm_loader: Add reporting the firmware git hash via the mailbox
    * firmware: vcos: Add reporting of which variant was built
      See: raspberrypi/linux#2806
    * firmware: Update vcdbg help
      See: #594
* Tue Jan 08 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Update to e1bd9b0 (2018-12-21):
    * firmware: Added a mailbox function for setting gamma
    * firmware: bootcode: Support parsing of gpio filters from config.txt
      See: #1076
    * firmware: video_encode: Allow Inline Headers to be changed whilst active
    * firmware: IL: Add XRGB8888 and XBGR8888, and support on video_render, isp, and hvs
    * firmware: image_encode: Allow arbitrary buffer strides matching the appropriate multiples
    * firmware: platform: Use 3aplus dt-blob section and bcm2710-rpi-3-a-plus.dtb
    * firmware: dispmanx: Also apply overscan_scale when clamping to screen
      See: https://forum.kodi.tv/showthread.php?tid=338052
    * firmware: arm_dt: Accept "csi" as a special DT node that masks IRQs
    * firmware: MMAL: Include OPAQUE in the list of supported encodings where appropriate
      See: https://www.raspberrypi.org/forums/viewtopic.php?f=67&t=226416
    * firmware: video_render: asserting on the buffer being unlocked is invalid
    * firmware: video_render: Further fix to a vcos_verify
    * firmware: IL hvs: Fail component create if the HVS or TXP interrupts are masked
    * firmware: Clean up masked interrupt handling - moves it to intctrl
    * firmware: vcinclude: Clean up INTERRUPT_xxx defines to use one place
    * firmware: vcfw: camera_subsystem: Stop cameras being detected if ARM has Unicam instance
    * firmware: vc_image: Fix up vc_image_bits_per_pixel for YUYV variants and BGR888
    * firmware: vc_image: Make the alternate path in yuv420 to rgb888 support bgr888
    * firmware: vc_image: Add an rgb_stripe_swap_ext which takes pitches
    * firmware: vc_image_convert: yuv420 to bgr888 failed on (width&31) != 0
    * firmware: IL isp: Use gamma block to shift 10bpp YUV to the correct pipe depth
    * firmware: video_encode: Always set the input port nBufferSize to match the image
    * firmware: Camera/ISP: Allow option to disable demosaicing

Files

/boot/vc/config.txt


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Aug 30 23:24:07 2022